I have to install Oracle 9.2 on Solaris 9 I have no clue can any body help

I have to install Oracle 9.2 on Solaris 9 I have no clue can any body help me I havent installed oracle on any Unix based system only done on Windows based by running the oracle installer can any one guide me how to accomplish this Task. any detailed step by step how to install from CD drive how to mount it. Please reply
Thanks

Hi,
<br></br>
<br>You can help with this doc Oracle9i Installation Guide Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, Linux Intel, and Sun Solaris</br>
<br>Bests reagards,</br>
<br>Nicolas</br>

Similar Messages

  • TS3694 I have 1015 problem o n my iphone I cant restore it now .can any body help me

    I was uptading mu Iphone 3g,after downloading the software Itone start it to iphone and then at the end time it shows 1015 error ,now icant restore my iphone.

    Your phone was jailbroken. Jailbreaking voids your warranty and forfeits any right to support from Apple or on these forums. Jailbroken devices can not be discussed here per the terms of service.

  • On my macbook pro when opening a page i can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success

    on my macbook pro when opening a page on safaryi can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success?

    Just select Print in Safari and then, in the bottom left-hand corner, select PDF and you can save it to whichever flavor pdf file you like.
    Clinton

  • HT4061 I can not connect to ITunes Store to download updates. I have no trouble connecting to the internet. It worked OK up to about a last month. can any body help.

    I can not connect to ITunes Store to download updates. I have no trouble connecting to the internet. It worked OK up to about a last month. can any body help.

    Hi there bigyellowdigger!
    I have an article here that can help you troubleshoot this issue with your connection to the iTunes Store. That article can be found right here:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • I have a brand new i phone 4s and i have updated the soft ware to the 5.1 and tried to restore it to download my old contacts and apps etc. and my computer now wont recognise my phone and itunes will not do anything can any body help please????

    I have a brand new i phone 4s and i have updated the soft ware to the 5.1 and tried to restore it to download my old contacts and apps etc. and my computer now wont recognise my phone and itunes will not do anything can any body help please???? i need this sorting asap xxxxxxx

    see if this link helps   http://support.apple.com/kb/TS1538

  • Need oracle discoverer faq s can any body help me

    Hi,
    I need some faq s in oracle discoverer for an interview purpose. can any body tell send me or tell me where i can get those.
    Thanks in advance,
    Chaitanya.

    <br>Hi,</br>
    <br>Have you read OracleAS Discoverer ?</br>
    <br>Nicolas.</br>

  • I have probably enabled voice over and have to double apps etc however I cannot swipe page up in setting to access accessibility to turn off voice over. Can any body help?

    I have probably enabled voice over and have to double click icons etc to make them work as well as hearing voice commands. However I cannot swipe the General page upwards  to access accessibility to turn it OFF. Anybody had this problem?

    Easiest way to connect to computer and turn it off in itunes. If you can't find how, let us know.

  • How can I install Oracle Database 10g for Solaries (SPARC) from the console

    Dear Forum Members,
    In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
    If yes. Then How?
    If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
    Thanks
    Aungshuman Paul

    There are 2 possible ways to accomplish this.
    First,
    Silent installation
    http://www.informit.com/articles/article.asp?p=174771&rl=1
    Second, (cut/paste from other site)
    How to install Oracle software remotely?
    Remote Software Installation Steps: (For Solaris only)
    If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
    For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
    1. Pick your source server or machine for remote installation.
    2. Check that your CD is in your source CD-ROM drive.
    3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
    4. On the source machine, login as a user.
    5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
    6. Become root user by typing: su (don’t use -)
    7. Check that Volume Manger is running. # ps –ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
    8. If not then do the following: # mkdir –p /cdrom/your-cd-file-name
    9. # mount –F hsfs –r cdrom-device /cdrom/your-cd-file-name
    10. Add the following line to your /etc/dfs/dfstab file: # share –F nfs –o ro /cdrom/your-cd-file-name
    11. Verify whether your source machine is an NFS server: # ps –ef | grep nfsd
    12. If you see an entry that contains /use/lib/nfs/nfsd –a 16, then nfsd is running and skip to Step 16.
    13. If nfsd is running, then type: # /usr/sbin/shareall
    14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
    15. Verify whether your source machine is an NFS server again by typing: # ps –ef | grep nfsd
    16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
    17. Now, log in to the target machine by type: # rlogin target-machine-name –l user (not root)
    18. Then log in as the root user by typing: # su
    19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
    20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
    21. # mkdir /remote_products
    22. # /usr/sbin/mount –F nfs –r source-machine:/cdrom/your-cd-file-name /remote_products
    23. # cd /remote_products
    24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
    25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

  • ECC 6.0 Installation says you have not installed Oracle but i have done it!

    Dear Friends,
    I am a newbie in SAP. I am trying to install ECC 6.0 on a windows 2008 64bit, already i have installed Oracle 10.2 (not using SAP Media-because i didnt find Oracle installation files in the SAP Media we have purchased). after seting the directory of components SAPinst says "you have not installed Oracle, install Oracle and then continue the installation".
    Thanks for your help.

    Hi,
    >> So as I understand, i can find Oracle installation files in 51036975 ZIP file, yeah?
    Yes,it is correct. Please read the statement, in the note 1486772 - SAP Systems on Windows Server 2008 R2
    To install the Oracle 10.2.0.4 database software,
    use the RDBMS DVD #51036975 (ORACLE 10.2.0.4 Failsafe Server 3.4.1.5,
    this DVD includes the database and the Failsafe component).
    Copy the sapserver.zip file attached to this note.
    Unpack sapserver.cmd and replace sapserver.cmd in the following directory:
    <work directory>:\NT\AMD64
    Best regards,
    Orkun Gedik

  • ERROR install oracle database 10gR2 in solaris sparc 64

    Dear All,
    I got error when installing oracle database 10gR2 on solaris sparc 64.
    these are the messages:
    /usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
    b/proc
    ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
    ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
    *** Error code 1
    The following command caused the error:
    echo "Linking /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc"; \
    rm -f /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc; \
    /usr/ccs/bin/ld -o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc -L/usr/app/oracle/product/10.2.0/db_1/precomp/lib/ -L/usr/app/oracle/product/10.2
    .0/db_1/lib/ -dy /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crti.o /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crt1.o /usr/app/oracle/product
    /10.2.0/db_1/lib/s0main.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pdc.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pds.o /usr/app/oracle/product/
    10.2.0/db_1/precomp/lib/libproc2.a /usr/app/oracle/product/10.2.0/db_1/lib/libslax10.a /usr/app/oracle/product/10.2.0/db_1/precomp/lib/libpgp.a -lpls10 -lplp
    10 /usr/app/oracle/product/10.2.0/db_1/lib/libplc10.a -lsnls10 -lunls10 -lnls10 /usr/app/oracle/product/10.2.0/db_1/rdbms/lib/kpudfo.o -lclntsh `cat /usr/ap
    p/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/
    ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10
    -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags`
    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10
    -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -
    lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10
    -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/sysliblist` -R
    /opt/SUNWcluster/lib/sparcv9:/usr/app/oracle/product/10.2.0/db_1/lib:/opt/ORCLcluster/lib/ -Y P,:/opt/SUNWcluster/lib/sparcv9:/opt/ORCLcluster/lib/:/usr/ccs
    /lib/sparcv9:/usr/lib/sparcv9 -Qy -lc -laio -lposix4 -lm /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crtn.o; \
    /bin/chmod 755 /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
    make: Fatal error: Command failed for target `/usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc'
    /usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
    b/proc
    ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
    ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
    *** Error code 1
    any help would be appreciate.
    Thank you
    Regards,
    Spirit

    I'm not sure with the solaris sparc 64.
    but the most common problem with Linux x86_64 which I assume probably similar. that type of error caused by
    you have to install glibc-devel-32 bit and libstdc++-devel 32 bit together with your 64 bit. both libraries required by the Oracle to solve the linking problem.
    http://forums.oracle.com/forums/thread.jspa?messageID=1254866
    probably it will help you.
    sorry, this is just my guessing of your problem.
    thanks

  • I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

    I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

    I am sorry Erickkasner but there is no longer direct support provided for Creative Suite 5.5 installation issues.
    You are welcome to post any specific errors you are able to discover within your installation log to this discussion.  Since you are using Windows then Exit Code 15 could mean one of the following:
    Installer database is corrupted
    Update pending to your operating system
    Improper permissions set for the Media.db
    The installation log file should provide additional insight into the exact error you are experiencing.  Please make sure to use the find command to look for the words 'ERROR' and 'FATAL' to locate the relevant error messages.

  • I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me.

    I have MAC OSX 10.5.8 and need to install adobe illustrator. I checked the compatibility and found that CS5 will work.Can any one help where i can find it. The trail version is fine with me as i just have to use it for couple of days till i get my mac book back from service. Can any one help me on this.

    You are welcome, ameronweb.
    To elaborate a bit, you may come across offers of a new/unopened/unregistered version, which is the simplest case (you would need a guarantee). Other cases require much detailed information (and a guarantee).
    If upgrading to 10.6.8 or higher is an option, you could use CS6.

  • Creating database after installing oracle 10.2 on solaris 10

    Hi,
    I installed oracle 10.2 on solaris.
    after installation is completed i started dbca to create a database.
    i mentioned all the details, after i click finish button, one window will open , in that all database details will be mentioned, when i click on that window, it will become invisible and that same dbca will remain same, actually after clicking ok it has to start creating database.
    but here it is going back to that dbca windows and in that back,cancel,finish button is there.
    why this problem is coming
    why it is not creating database after i clicked on finish botton,
    please help me, it is very critical, i want to create database and i want to submit to the client project.
    Regards,
    Veeresh S

    ya, i clicked in finish and one html window opened, in that also i clicked ok, after nothing will work, no messages,no errors,no logs created.
    i want to submit this to 1 project, but i am stucked here,
    and solaris server is 64 sparc
    and i installed oracle 10.2.0.1 64 bit for sparc 64
    now this is not working.
    can i install oracle 10.2.0.2 x86 in this sparc 64 bit server

  • How to install oracle 8i on sun solaris OS.

    Dear all,
    how to install oracle 8i on sun solaris OS.
    please guide in detail.
    Thanks
    Muhammad Nadeem

    OTN has much to offer including installation guides:
    http://www.oracle.com/technology/documentation/oracle8i.html
    Werner

  • Installing Oracle 10g RS2 in Solaris 10

    Hello Guys .. I need a tutorial on "How to Install Oracle 10g RS2" on Solaris 10 .. Please help me ...

    hi
    what do u mean by Oracle 10g RS2 what RS2 stands for
    well
    Oracle installation of 10G Release 2 on solaris
    if its x86 then see this
    http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15696/toc.htm
    if its sparc64 then see this
    http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15689/toc.htm
    if this x86-64 then this
    http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15703/toc.htm
    hope this helps
    CHeers

Maybe you are looking for

  • Closing front panel of subvi

    I have a main vi that opens many subvi with their front panel (they pop up as a normal windows not like modal). I need to close a subvi by pressing a button on it but I can't find any way. Thank you everyone, Massimo Ponte.

  • Need help - I2C write/read with TAOS TCS3414 light sensor using USB-8451

    Hello, I'm new to labview and need help setting up a vi that will allow me to communicate with a digital light sensor (TAOS TCS3414) using a USB-8451. I need to use the sensor to measure light from a light source that I designed and built as part of

  • Port Number in configuration sap enterprise potal in NWDS

    Does any body knows, What is the port number that i need to use in the configuration SAP Enterprise Portal in Netweaver developer studio?

  • Reconcilation of material in sap

    what is the t code use for reconcilation of material

  • Oracle 8i/developer 6

    I have installed the personal oracle 8i on my pc, however i am finding it difficult to install developer 6 on the personal 8i and also get it working. Couyld somebody please help me out.