I have to keep adjusting the brightness
I have a mid 2010 Macbook Pro 13". For the past several days whenever it has gone to sleep or when it has been turned off and restarted I have had to go in and adjust the brightness. When it comes back on the brightness is nearly all the way down. It has never done this before and I don't know why it has started now. No new programs have been installed to make it do this.
I tired that. I even unchecked it and then rechecked it. The box is checked when I open the display preferences to turn up the brightness after it has dimmed. The only thing different is that the slider is all the way to the left which is the dim position. So I slide it back to where I like it but like I said it goes back to dim anytime it has been off for a while. Thanks.
Similar Messages
-
Problem in adjusting the brightness manually
Hi,
I have purchased HP Pavilion 15-n205TX with win 8.1 recently.
I have problem in adjusting the brightness of my screen. When i do it manually by pressing the keys f2 and f3, there is no change in the brightness of the sreen.
Even when i try to change it from Settings-Brightness, there is no change in the brightness
This question was solved.
View Solution.Hi AG_8055,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion 15-n205tx Notebook and brightness not working correctly. You could try a refresh on Windows 8 stops anything that has not closed correctly. You could try a BIOS update. The HP Support Assistant will help you install the drivers and software for your machine. It will locate the correct driver update for the brightness. Here is a link download the HP Support Assistant if you need it.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
When I went to adjust the brightness on my iphone, the screen went black. I have tried everything I can think of and have read online to try....resetting the phone, turning it off/on, charging the phone, and restoring the phone. I can see the "slide to unlock" page and the "enter passcode" page. When I enter the passcode, the screen goes dark again. I can't even answer calls. What should I do now?
If no change after restoring the iPhone as a new iPhone or not from the backup, the iPhone has a hardware problem.
-
I have an Apple monitor model A1316 is using for Windows computer, but I could not adjust the brightness. The monitor is not bright enough when I turned off the lights in my room.
Have you plugged the USB cable into the computer also as the brightness is controlled over USB. If this does not work, you would need the Apple Display Driver for the version of Windows that you are using. The display driver is part of BootCamp software that you may be able to find online
-
I don't have any sound and can't adjust the brightness Macbook Pro Mid 2009 with Windows 7 64bit
I installed Windows 7 Professional 64 bit in my Macbook Pro Mid 2009 using Bootcamp 5.1.2 and from the beginning the sound is not working and cant adjust the brightness either. Tried installing all the drivers that people recommended from Realtek, nVidia and nothing has help me fixed the problem. is there a way that i could fix those problems?
Look in the Boot Camp system requirements located here: http://support.apple.com/kb/HT5634
Find your computer model and year. I think you will find that you should be using version 4 of the Windows support software.
MacBook Pro
(13-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, 2.53 GHz, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2009)
4
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2009)
4
4
DVD
DVD
DVD -
How to adjust the brightness of a second display (Dell 3007WFPHC 2560x1600 dpi) connected to 27 inch iMAC 2012 through thunderbolt port by an Apple Mini Display Port to Dual-Link DVI Adapter?
Macs control computer by USB. With a non-Apple display, you will have to use the brightness control on the display.
-
Lenovo G50-30 Can't adjust the brightness
HI
recently i bought a lenovo G50-30 laptop with windows 8.1(64-bit)
the performance was low and i downgraded it to windows 7 professional (32-bit) which improved the performance drastically,
Now when ever i try to install the vga driver i get this message saying "this computer does not have the minimum requirements for installing
this software",and also i cant adjust the brightness
Did i do anything wrong,does anyone know what to do
please
Thankssorry for the late reply, here's the things you can try , try rolling back the driver or you can access the registry to adjust some values here's the step:
1- install latest driver of your graphic card
2- This step will fix the problem:
3 go to registery by regedit and change the value to 0xf048
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]
"FeatureTestControl"=dword:0000f048
OR
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0001]
"FeatureTestControl"=dword:0000f048
Dont fake the funk............ -
How do you adjust the brightness on a Thunderbolt Display
How do you adjust the brightness of a Thunderbolt Display attached to an iMac ?
I had this peculiar ‘issue’ hooking up to my MacBook Retina when my Thunderbolt Display was delivered but Applecare - thanks Andrew - got me there. It seems daft!
The Thunderbolt Display Brightness slider IS there – you just have to know how to make it show up.
At initial set-up of the Thunderbolt Display [or if the Brightness slider is ever not visible in the System Preferences> Thunderbolt Display window], so long as the Thunderbolt [external] Display and the Macbook Display are ‘mirrored’ I can control the Thunderbolt [external] Display via my MacBook Retina Brightness keys [F1 & F2] – or by the Brightness slider that THEN appears in my System Preferences>Thunderbolt Display window. Once set up the Thunderbolt Display System Preferences Window continues to show the Brightness slider but I occasionally lose it if my MacBook has been disconnected from the Thunderbolt Display for some time – and I then have to start over.
So:-
Apple menu >
System Preferences>
Displays>
Click Arrangement [at the top]
Click Mirror Displays [at the lower left]
That then gives me-at-least a Brightness slider on the System Preferences> Thunderbolt Display window [as well as on the Built In Retina Display window] and I can then adjust them independently.
Oddly, having set this up just once the Brightness slider then remains on my Thurnderbolt Display and I can control it [and my MacBook Retina Display independently]. Occasionally I lose it again and have to start over.
Hope this works for others. -
I have windows 7 and Acrobat X Pro.
When I use the snapshot tool I cannot figure out how to adjust the brightness on that image? On my old computer a picture tollbar would pop up. A lot of images are very light and I need to darken them.My not be much you can do. However, I would just clip them into my favorite image tool (in my case IrfanView) and adjust there.
-
Windows can not adjust the brightness on this display
I have a Toshiba Satellite LX835-D3300 ( Serial #ZC119804Q )
I want to brighten my display, but it tells me..... Windows can not adjust the brightness on this display.
In my HELP section on my computer it tells me to...
Tap or click PC and devices, then tap or click Display
Make sure the Adjust my screen brightness automatically slider is turned on
Get the best display on your monitor - Microsoft Windows Help
(If you don't want the screen brightness to change automatically, tap or click the Adjust my screen brightness automatically slider to turn it off.)
Tap or click Apply.
I do not have that.
I notice that if I go to the side of my screen and then click on Devices, click on projects... "Second Screen" is showning
I clicked on it and then I went and clicked on PC screen only and it is highlighted, but when I go back to it, it stills shows "Second Sreen"
Please help me. What am I doing wrongAll-in-One LX835-D3300
Downloads here.
Have you upgraded to Windows 8.1? If so, did you follow these instructions?
How to Update from Windows 8 to Windows 8.1
-Jerry -
How can I adjust the brightness of my old Apple 24" LED Display?
How can I adjust the brightness of my old Apple 24" LED Display?
Jacob,
Thank you for the quick response. I opened both the TIFF and the EPS in Illustrator. I used the Eyedropper tool to get the CMYK values of the color of the text part in the TIFF, then I went back to the EPS and selected the text and input the CMYK values in the color tab. I know it's not precise, but it's close enough. Could I have done this better?
Yes, I have access to Photoshop but I haven't tried using it with vector files. I am really new to graphic design and I need all the help I can get. Thank you! -
How to adjust the brightness on Tecra 8100?
hello there i'm using a tecra 8100 and I just cant find where to adjust the brightness which is really giving me problem. Please anyone help.
> Since I install my Windows XP, I can't use my Fn button.
@pardhi
You have installed the OS manually and you didnt use the Toshiba recovery CD. Am I right??
The fresh Microsoft OS does not contain the Toshiba drivers and therefore the drivers for the FN functions must be installed additionally.
The problem is that you will not find any drivers for the Windows XP for the Tecra 8100.
The WinXP drivers are not available and therefore you cannot use the FN keys -
My display is dull, how do I adjust the brightness?
I have an iMac, the screen has gone quite dark (as if in sleep mode) I have to sit in a darkened room to see it properly. Have I hit the wrong key or key combination of keys? How do I adjust the brightness? Help
If you are still on 10.4.11 (stongly doubt it) you probably have wired keyboard, the F3 key is for brightness. Also check System Preferences - Universal Access - Seeing and check there too.
-
Can't adjust the brightness of my hp probook 450 G0 with FN+ f9 and f8
i have hp probook 450 G0 and i am finding the solution to adjust the brightness of my laptop by using F keys...i have installed all the drivers of my latop and i am using win 8.1 32-bit ..plz help..urgennt solution...before this i was using win 8.1 64 bit but this option worked...so plz help
Hi:
Make sure under the display adapters category that you see the name(s) and model number(s) of the graphics adapters listed there.
If you see a graphics device labeled Microsoft Basic Display Adapter, the applicable graphics driver was not installed.
You also need to install the Intel chipset installation utility and reboot before installing the graphics driver.
Not having the chipset and graphics drivers installed are the most likely reasons you cannot adjust the screen brighness (it is stuck on maximum). -
Hi. I'm having quite an issue here. My macbook screen is only lid when i boot and when i adjust the brightness of the screen (going all the way down and up from there). either way it goes black again after a few seconds. External monitor works though.
Any ideas on how to solve this?
LasseI buy the dirty theory as well. plug and unplug a whole bunch of times - you may be able to dislodge whatever is causing the issue. Also - make sure the plug is fully seated - (some of the pad jacks are vert tight, and you really have to work them in). I gather you are out of warrenty? Blow in the hole.
last resotr - take a toothpick, dip the end in fingernail polish, get rid of the xs, then very very gently, insert the pick and try to rub the contacts. very gently as you do not want to bend them.
Maybe you are looking for
-
I tried to set homepage - Tools/Options/General then added the URL of my homepage. Clicked OK.<br /> I then set my Desktop as the Destination for Downloads. Clicked OK.<br /> After opening Firefox next time, up comes the unwanted "Welcome" page - whi
-
Ipad 3 Fresh out of the box today, simply does not charge. Thoughts? (other than take it back to apple)
-
"Always on Top" of jdk 1.5 is not working when...
I created a sample application that has Frame/Window and displays some text. Then i needed to make the window always visible on top of any other application or windows. But then when i opened applications like Battle Realms, Counter Strike, or any ot
-
Moving iWeb data from one computer to another
I have an iWeb site on my old mac lap top. I can not get the data to transfer to the new laptop. How do I move all iweb entries from one computer to another?
-
Help! my brand new curve wont reboot!
I tool the battery out for a boost for the first time and it won't complete uploading. It shows the status bar for a while, screen goes black, red led and keys light up....then it starts all over. I have used a new battery and have been trying for ho