I have to log in everytime with my user name and password even though "Keep me logged in ...." is checked, this just started

I don't know what else to say about this but I guess I have to enter something in this box.

gemma252 wrote:
I have just installed snow leopard and reset my admin name and password.
Likely because both occurred at the same time and/or you created another Admin user/ didn't allow the new Admin to admin the machine?
Hold c and boot off your Snow Leopard install disk and second screen in under the Utilities menu is Reset Password.
There is also a Single User mode (caution root user!) way to reset passwords on each account.
http://osxdaily.com/2011/04/25/change-admin-password-mac/
Before you do that, make sure at any opportunity to backup your files manually to a external drive and disconnect.

Similar Messages

HT204053 I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on

I did not know my kids had set up an Itunes account for me with one user name and password. then i got an i phone and set it up with a different email address and new password. how can i get my accounts to merge so i can have all of my music on my iphone

Quote: "You cannot merge two or more Apple IDs into a single one. You can, however, use one Apple ID for iCloud services and another Apple ID for store purchases (including iTunes in the Cloud and iTunes Match). See “Using one Apple ID for iCloud and a different Apple ID for Store Purchases” above for details." See also Apple ID & iCloud FAQ: http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US
You can set up your iCloud account on your iOS device under: "Settings > iCloud" and a other account for store purchases under "Settings > iTunes & App Stores". Unfortunately merging accounts is not possible but you could transfer all of your music manually via iTunes from your Mac or PC.

Problems with invalid user name and password

We have a one week old MacBook 2.2GHz basic white model that is generally working well.
However a problem has now arisen whereby on any attempt to shutdown or restart it won't accept the administrator user name and password, returning an 'invalid' warning. The issue seems to be the user name as the administrator password has worked OK in other situations. Naturally I have checked and re-checked the user name (which was in the form (first name followed by surname in upper and lower case) and it was OK (in any case it was being prompted automatically by the system.)
I have subsequently changed the administrator name (to the form first name only in upper and lower) and the password as suggested by the following article:
http://docs.info.apple.com/article.html?artnum=306876
Nothing has changed. Can anyone help?

HI Martin, a late post to confirm the solution from the last post by using the "RETURN" key works..
(mouse click worked ok in Tiger 10.4.x I thought).
Tis was a delight and so obvious after seeing these symptoms.
I have posted this entry in case anyone else get's into this situation since OSX LEopard 10.5. Several people have encountered this issue where they may have:
• LEopard 10.5.x installed
• have 2 or more active users LOGGED into the OSX system via fast user / fastuser switching
• request a SHUTDOWN or RESTART from an user
• get a OSX request to supply administrator attributed user and it's associated password to validate SHUTDOWN | RESTART request,
• have admin | root account verification failure of password after 'clicking'.
After some months of frustration, it seems a simple PRESS of the "RETURN key" works!
Simply, DON'T mouse click after entering admin user/password.... instead press "RETURN" key.
fwiw.
w

Invoke-sqlcmd with domain user name and password

I am trying to execute below small SQL script from powershell by passing my domain user name and password..but it is throwing an error login failed for the user.
Howerver I am able to execute the same query by passing normal user 'non domain' and password. The issue is only when i am trying to connect with domain username.
Can you please suggest if there is any way to execute below query with domain user..
Invoke-Sqlcmd
-query "select name from master.sys.databases"
-ServerInstance "CM-NCKM-DBTST04\SQL2012" -username "sos\9venk" -password "xxxx"
Thanks
Venkat
venkat

Hi Venkat,
Agree with Mike, to connect sql via powershell, you can refer to this article about authentications:
Connecting to SQL Server through Powershell
Please try to gather credentials using Get-Credential, and then use New-PSSession -Authentication CredSSP to open the pssession.
A similar discussion about this issue is for your reference:
Invoke-SQLCmd with Different Credential
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Web Services with Authentication - User Name and Password.

How to create a web service and web service client where the need is to authenticate using SOAP Header based authentiacation. The authentication is to be based on UserName and Password in the SOAP Header.
Regards
Pramod.

Dear Pierluigi Vernetto
What is meant when they say to include SOAPHeader with the parameters UserName, Password for Authentication. How this type of authentication is done.Can you please provide some code snipped to facilitate. I am new to the web services and did successfully a web service generation and client generation using WSDL.
WSDL Snippet :
- <wsdl:operation name="RegisterService">
<soap12:operation soapAction="http://www.abc.com/webservices/RegisterService" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
<soap12:header message="tns:RegisterServiceAuthenticate_Info" part="Authenticate_Info" use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://www.abc.com/webservices/">
- <s:element name="RegisterService">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="InputText">
- <s:complexType>
- <s:sequence>
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="RegisterServiceResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="RegisterServiceResult">
- <s:complexType>
- <s:sequence>
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="Authenticate_Info" type="tns:Authenticate_Info" />
- <s:complexType name="Authenticate_Info">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="UserName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Password" type="s:string" />
</s:sequence>
<s:anyAttribute />
</s:complexType>
If i simply create the web service using the WSDL , will the Authenticate_Info will be taken care of.
What needs to be done for the Client side .jsp code and how this information of UserName and Password will be passed while making the call to the web service.
regards
Pramod.

Although I can receive mail on my btinternet address I cannot reply or send. My settings , apart from user name are extactly the same as my wife's who has no problem. We are the same account but with different user names and passwords.

Settings use mail.btinternet.com as smtp, SsL is on, port 995

Hello Bigstorr,
It sounds like you are not able to send emails from your iPad. I found a couple of resources that address issues with email on the iPad:
Setting up and troubleshooting Mail
https://www.apple.com/support/ipad/assistant/mail/
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

Hi, Trying to log in with my user id and password at iocbc but was not able to access. Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting Anyone can advise? or i need to download?

Hi,
i have the same problem?
Trying to log in with my user id and password at iocbc but was not able to access.
Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting
Anyone can advise?

You need to install Java for your Mac OS version, and/or make sure it's enabled in the Java Preferences application and your browser's preferences.

Log on the other computer with user name and password

How to use labview to write a software to log on the other computer with user name and password?

Jimmyzeng wrote:
Nobody can help on this?
Besides repeatedly asking the same question in thread after thread, you are not providing enough information to answer the question. You have been given answers already stating that operating systems do not make this very easy to do using programs for security concerns. In addition, the authentication process varies depending on what service you are communicating with. You really need to provide more information if you want to get meaningful answers to your questions.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have the same problem.. EXACTLY. . When phoning Apple Support they had trouble understanding my problem and couldnt find any type of solution. No one seems to take responsibility for GameCenter issues. The assistant escalated the problem but no one could find an answer. .
The only idea was to set up a new apple id, hence a new GameCenter account. . But that would loose all the itunes data. Anyone got ideas ?

TS3276 I receive a pop up from ICal saying the server does not recognize me user name and password. This started yesterday. I have no problems with receiving or sending emails through Mail

I receive a pop-up from ICal saying the server does not recognize my user name and password for my me.com email address. This started yesterday and occurs about every 5 minutes or so. There are no problems with receiving or sending email through Mail. I did change me email password several days ago but have no problems sending/receiving since then.

I fixed the problem. I opened Preferences in ICal and entered my new password. No more pop-ups

Hello. i have a 2011 iMac G4 with OSX10.9.2 and I can't find AirPlay . is it on this version of iMac? i just got a new soundsystem expecting to connect via AirPlay

hello. i have a 2011 iMac G4 with OSX10.9.2 and I can't find AirPlay . is it on this version of iMac? i just got a new soundsystem expecting to connect via AirPlay but don't know where to find it....?

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
iTunes- Troubleshooting AirPlay and AirPlay Mirroring
iTunes- Using AirPlay
Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Other solutions are the Air Parrot, StreamToMe, and AirServer.

HT204053 I have an Apple ID and use I Cloud with my Ipad and Iphone. I am trying to publish a website from my macbook but my user name and password is not recognised when I try?

I have an Apple ID and use I Cloud with my Ipad and Iphone. I am trying to publish a website from my macbook but my user name and password is not recognised when I try?

Ken.Lloyd wrote:
Sorry for the delay. System preferences icloud is not an option for me. Syst preferences mobileme is
The minimum requirement for iCloud is Lion 10.7.2 - earlier systems don't show the iCloud preference pane. If you want to use iCloud you will have to upgrade to Lion or Mountain Lion (assuming your computer meets their requirements) but even so you won't be able to publish web pages to iCloud because it does not provide web hosting. This page examines that situation in more detail:
http://rfwilmut.net/missing2

After Upgrade Cloud Control from 12.1.0.3 to 12.1.0.4 the user name and password have to be entered more than once

Hi everybody,
we recently upgraded our Cloud Control from 12.1.0.3 to 12.1.0.4.
Now we have the following, a little bit strange behaviour.
Everytime we want to log into Cloud Control we have to enter our password more than once.
Sometimes even more than twice.
It alawys says user name and password are required
Does anybody has the same problem?
I didn't found anything on MOS. So any advice or answer is appreciated.
Greetings,
Daniel

Hi Daniel,
We have seen similar issue when we use non-certified browsers for accessing 12c console
Use certified versions of IE with EM 12.1.0.4 Cloud Control. for instance, Microsoft Internet Explorer 10.*, 9.*, 9 and 8 versions only.
This document can help you to understand the Certified Browsers:
<<Doc ID 1912367.1>> EM12c : Supported Browsers and Adobe Flash Players list
Regards,
Rahul

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
Have you tried deletting the plists for MAS?
This page might help you out...
http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
Let me know how you get on?
Thanks.

I have to log in everytime with my user name and password even though "Keep me logged in ...." is checked, this just started

Similar Messages

Maybe you are looking for