I have to read user agreement everytime I open iTunes and my settings reset

When I open iTunes, the user agreement from pops up so i agree and skip the walk through. When it opens, all my settings are reset to the default. My library name changes and my settings change. What can I do to prevent this from happening everytime I open the program.

yes. Settings, general, passcode lock. enter your passcode then turn it off

Similar Messages

  • Why do I have to enter my password everytime I open iTunes?

    Why do I have to enter my password everytime I open iTunes?
    The only time I don't have this issue is if I open up iTunes within a few hours of signing in. If more than 10+ hours, I have to sign in with my password.
    I can't see an area in the preference panel where I can bypass this step.
    It makes sense if I'm in the iTunes store and purchasing a song, but not if I simply want to listen to an existing playlist.
    Any help would be appreciated

    Actually, the only thng that will do is set the frequency of requiring the password once it has been entered the first time. The default (I think) if restrictions are NOT turned on is fifteen minutes. Regardless of this settings, the AppleID password will need to be entered at least once (more if there is a substantial amount of time between purchases.

  • I have to restart my computer everytime I open itunes!!

    My itunes worked fine till I downloaded the newest version/update- now when I turn on my computer (Windows7) I can open itunes and everything works fine. But when I close it out I can't get it to open again untill I restart my computer..... I've unistalled and installed itunes many times but it does the same thing. Anyone else have similar problems or knows the fix to this???

    Try reinstalling your iTunes as per these directions:
    support.apple.com/kb/HT1923
    Don't worry, your iTunes library will be preserved even if you reinstall.

  • Everytime I open iTunes and press scan media, then iTunes just hang up

    I've found when I setup my iTunes on my Win8, once I open it and click scan button (or search. I'm not sure because of I using Chinese version. It's just the button next to the "go to itunes store" button.) in the initial page, then the whole program will hang up, until you terminated it manually. I've re-setup again and again, but it's usless. Could someone tell me why? I ususally use iTunes on Win7 and get no problem on it, till I upgrade to win8....

    Hey Felix TW!
    Here is an article that will help you troubleshoot this issue with iTunes:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • I have the wordfeud app but everytime I open it it's jumping straight to the App Store why is this happening?

    I have the wordfeud app but everytime I open it it justs diverts to App Store so annoying can you help thanks

    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Hello, I use windows xp, everytime I open itunes, it keeps telling me to help protect your computer, windows have closed this programme, any idea?e

    hello, I use windows xp, everytime I open itunes, it keeps telling me << to help protect your computer, windows have closed this programme, any idea?

    try to select the computer cd/dvd autorun off.
    I had the same problem, then Kaspersky software found a conflict suggesting me this solution.
    Itunes now works...even if it always asks to set the cd/dvd autorun on when lunched.

  • Why is it everytime i open itunes i have to log in

    everytime i open itunes it has reset and i have to log in again and then change the view. i.e. show sidebar?

    Also, I assume it's the username and password for your home page, which could be Gmail, Yahoo mail, or another secure site you want to visit that requires a login. Is that right, or is this request coming out of left field?

  • Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs.

    Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs. What is going on and what can I do to fix this?

    Unfortunately no, It says "Adobe not responding" as well when I try to open a pdf. It has done this a few times where I had to uninstall and reinstall. Also, Illustrator tells me to uninstall/reinstall as well.

  • I have an active subscription but everytime I open the program it says trial expired.  I have installed, reinstalled, and installed again.  I have also installed the windows registry patch.

    I have an active subscription but everytime I open the program it says trial expired.  I have installed, reinstalled, and installed again.  I have also installed the windows registry patch.
    It wouldn't install for nearly 5 times I tried to do this.  Now it's finally installed again but it won't budge past the trial version.  I click BUY NOW but then it says "error you already have a subscription" then it times out and just stays on the Trial Expired page.

    Hey kushlar,
    Please log out from your Adobe application and login again.
    Once you launch Acrobat and get error saying trial expired, you will find an option saying 'license this software'.
    Select this option and enter your credentials.
    Now check and let me know.
    Regards,
    Anubha

  • After upgrading my I-Pad I now have to use a password everytime I open it.  How do I delete using the password to get into my i-pad?

    After upgrading my I-Pad I now have to use a password everytime I open it.  How do I delete using the password to get into my i-pad?

    Thank you,
    out of the five helps -
    your's was the most explicite
    and it worked.
    Thank you so much,
    Susan

  • Is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?

    is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?

    Ziatron wrote:
    With Snow Leopard if you delete a file (put it the trash) and then do a secure delete it's gone.
    The OP is adressing SSD's in particular. Neither Snow Leopard nor Lion have the ability to secure erase an SSD of a single file by user action. This because SSD's write data in pages, but can only delete in blocks. Secure emptying of the trash on an SSD is no different than a non-secure erase, as the controller will not permit erasure of blocks until the entire block is freed, which is almost never the case with even group file deletion. Erasure is simply the re-writing of the "allocation table" that the pages are no longer in use.
    SSD's are only rendered "erased" of previous data after an indeterminate period of use, and re-use that would eventually free blocks for re-write, and then actually over-written.
    TRIM helps speed this process, but does not alleviate the block versus page issue.
    Some additional info.

  • Microsoft Office 2004 (Word) unable to save files  I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

    Microsoft Office 2004 (Word) unable to save files
    I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
    So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
    How can I get rid of this error message?

    Look, I realize you might have to get your machine working, so this is how you revert back.
    Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
    #1 Backup your personal data off the machine.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Reinstall OS X 10.6 from disk
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk  of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    #3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #4 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    That's it really.

  • Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??

    Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
    Thank you. Nick

    Okay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
    Re: How do I turn off the compatibility mode for ITunes.
    Does that clear up the compatibility message?

  • Everytime I open itunes I get a message saying itunes has stopped working and windows is looking for a solution

    Everytime I open itunes I get a message saying itunes has stopped working and windows is looking for a solution

    I have the same issue. An iTunes help page (iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support) suggested I hold down shift and control when clicking to open iTunes, which opens iTunes fine for me. That would mean the problem is in the third party plug-ins that work with iTunes. However, the help pages did not say what to do with the plug-ins once I knew that was the issue. The pages said to find the plug-ins and move them to the Desktop, which I did. That's where the help pages stopped, which is ridiculous. Does anyone know what to do from there?

  • TS2380 It's says I have error code (13014) but I cant open iTunes or get on the internet

    It's says I have error code (13014) but I cant open iTunes or get on the internet

    "Extended" network means your phone is picking up towers from another carrier that Sprint has an agreement with. Long story short, Sprint does not have adquate coverage in the area where you are located when you see "extended".

Maybe you are looking for

  • Logo disapearing after printing in alv report

    Hi Techis I uploaded a logo in alv grid display and its showing fine but when i print the report it is disapearing from Printed document. pls help it out. Regards Santosh L.

  • Can I run two PIDs from the same vi?

    Hi I want to control speed of the rotating shaft and force applied by the pneumatic cylinder using two different PIDs from the same program. I managed to get two PIDs to work separatly using PID control loop VI`s supplied with labview 6.1 (I got Kc,

  • Lost icons on the left

    I have just set up mail for the other half on her iBook but it does not seem to be the same as my mini on the left she only has icons for "Inbox Sent Trash" I have checked the setting so that they are similar to my mini in Preferences but I have more

  • Connection error when deploying Web Services example

    C:\java\sample\how-to-web-services\ejb>ant deploy-usingadmin.jar Buildfile: build.xml common: [echo] BuildName: EJB Stateless Web Service [echo] BuildHome: C:\java\sample\how-to-web-services\ejb [echo] BuildFile: C:\java\sample\how-to-web-services\ej

  • Dynamically update a ResourceBundle ?

    Hi, I need to update a ResourceBundle dynamically. The following code doesn't work properly. Only when I restart the program is the key visible to it. package bidon; import java.io.*; import java.util.*; public class Bidon{     ResourceBundle bundle;