I have to select bluetooth audio with every incoming call (instead of the call automatically going to bluetooth, which i want) -- is there something I'm missing?
Just got new Bose bluetooth headphones, which work great -- can pair with iPhone 6+, mac, car -- the pairing is fine, sound is great, function is fine. The problem is exclusively INCOMING calls. Unless I see the call on the phone, I cannot hear it through the headset (therefore rendering the bluetooth for incoming calls useless).
Sequence is:
Incoming call
I have to manually select the bluetooth pair for the headset when the call is accepted
Anyone know of something I'm missing here?
It's not the headset -- it's working and pairing fine, sound is fine, AND i can make a call.
Thanks.
Thank you for using the Apple Support Communities
This sounds like a bug and I would recommend filling out a feedback form letting Apple know what your problem is. https://www.apple.com/feedback/iphone.html
Similar Messages
-
Hi i have just updated to the latest i-tunes (11) but when i connect my i-pod shuffle to it it does not show you what tunes i have on it like the lod version used to.Which is a bit of apain as i cannot remember every tune i have put on it.Is there something i am missing somewhere.Putting tunes on it is no problem but like i say is there somewhere you can see the list.
See if this helps you - https://support.mozilla.com/en-US/kb/Lost+Bookmarks
See if you can restore one of the ten bookmark backups on the old PC. -
Call Audio On and Off with every other call
My wife both have the Samsung Intensity 3. We like the phones but every since getting them the call sound only comes on every other call whether going out or receiving. Even just yesterday I was stuck in the desert with limited reception and had to call 911 and the call sound wasn't on which was awful when I would only have sporatic 30 second windows of service.
This is my second new Samsung Intensity II after they replaced it 2 weeks ago and I don't know what the problem is. As I said, my wife has the exact same issue. And it happens everywhere we go not just at home.
I don't know what to do other than get another phone model.No the sound comes back on. On the second attempt at calling the sound would be on. My previous device did not have this issue.
Since this problem was constant and we couldn’t any longer to resolve the issue we opted to get a different device. We switched to the LG Extravert and now the issue does not occur at all. The phone works exactly like it should.
So I don’t know why the Samsung Intensity III was having so many issues, especially after getting another new Intensity after the first one did the same thing. -
Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?
What I would like to do is to use Lightroom as I have been doing with LR 5.7. Tag certain images to be shared to the Creative Cloud which my editor can then see and tag as to which she would like to see final versions of. In the best case, I would then see these tags and edit the images as appropriate and save the JPEGs back to the Cloud where she can download them for final production.
Possible? -
If I have soundflower selected as audio input. My stream on twitch doesn't start.
If I have soundflower selected as audio input. My stream on twitch doesn't start, even tough it says in the logs it's streaming as usual. When I have my microphone selected, the stream starts perfectly fine.
If you need more info, please do tell me!
Kind regards and a happy christmas from a frustrated gamer.Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline -
I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
I have Itunes on my PC with close to 1000 songs. The songs were also on my Ipod. I connected my Ipad2 and blew away all of my music. Can the music be retrieved and if so how can i do it? tks
Sure it can, transfer the songs from your backup that you maintained on an external drive,DVDs,cloud storage solution.
You didn't have a backup?
If you purchased them from iTunes, plug in your iPod-once it mounts in iTunes right click on the iPod icon and select transfer purchases.
If they were not purchased from iTunes-google is your friend.
PS.
If files are important to you-always have multiple copies on separate media. -
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want. -
Why does Siri keeps talking with every action I take on the iphone?
Why does Siri keeps talking with every action I take on the iphone?
Settings > General > Accessibility > Speak Selection > switch off here
-
Automatic Passing of parameters with every RMI Call
We need the ability to automatically pass a couple of objects, both Strings in this case, with every RMI call we make from our clients (multiple clients) to the servers (multiple servers). Currently I'm using some code that Rickard �berg wrote a while ago that uses UnicastRef.marshalCustomCallData() and UnicastServerRef.unmarshalCustomCallData() so do this. I extended these 2 classes and rolled my own UnicastRemoteObject. This has worked out great but now I need to also use Custom Socket Factories, to get through the firewalls that our customer has. So I thought I could just extend UnicastRef2 and UnicastServerRef2 but when I do the servers never get
bound to the RmiRegistry.
We don't want to explicitly add these arguments to all our remote interfaces because we have a bunch of remote object classes and don't want to rely on the programmer sending the correct values or when writing new remote methods making sure that they these arguments are included.
We're using 1.4.1, but this also fails with 1.3.1.
The only thing I see in the logs is:
Oct 2, 2002 1:53:39 PM sun.rmi.server.UnicastServerRef logCall
FINER: RMI TCP Connection(1)-216.100.254.188: [216.100.254.188: sun.rmi.registry
.RegistryImpl[0:0:0, 0]: void rebind(java.lang.String, java.rmi.Remote)]
Oct 2, 2002 1:53:50 PM sun.rmi.server.UnicastServerRef logCall
FINER: RMI TCP Connection(2)-216.100.254.188: [216.100.254.188: sun.rmi.registry
.RegistryImpl[0:0:0, 0]: java.rmi.Remote lookup(java.lang.String)]
Oct 2, 2002 1:53:50 PM sun.rmi.server.UnicastServerRef logCallException
FINE: RMI TCP Connection(2)-216.100.254.188: [216.100.254.188] exception:
java.rmi.NotBoundException: FileManager
at sun.rmi.registry.RegistryImpl.lookup(RegistryImpl.java:106)
at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:342
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:207)
at sun.rmi.transport.Transport$1.run(Transport.java:148)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:144)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:4
60)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport
.java:701)
at java.lang.Thread.run(Thread.java:536)
So anyone know why this doesn't work when I supply the SocketFactories?
Is there a better way to accomplish this than extending sun.rmi.server classes (which was really easy)? I can supply the source for my classes if it helps, though my UnicastServerRef2 and UnicastRef2 classes are pretty simple.
Mark.First, did you really bind the servers?
Second, does it work with the socket factories but without your custom Ref classes? I would suspect the socket factories here. Do they have a reasonable override for the Object.equals() method?
EJP -
We have been having a problem with newsletters for a client.
The newsletter works fine except if we add a button and/or link to the top zone on that newsletter it blows up ONLY ON iPhones!
This happened last month too. It seems to be related to length of the newsletter too. It works on every device except iPhones - so weird.Hi, is anyone else experiencing i-phone only problems on email campaigns? not bashing Apple, just having issues where our newsletter are only having issues on iPhones
-
I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me
I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow. -
I share my iTunes accont with my kids. Many of the songs that they purchase, I do not want in my iphone Library, and I don't want them to play when I have my phone on shuffle. How an I remove unwanted songs from my phone library withot affecting their devices?
These are the downsides of a shared library because if you delete the song from your library it will get also automatically deleted from your kids library. If you want to proceed then please follow this guide: https://support.apple.com/kb/HT4915
-
I wiped my ipod classic and then my computer crashed, so i no longer have the songs i purchsed from itunes on my ipod or computer! I have a new computer now with itunes installed, can I get the songs purchased previously from itunes somehow?
Yes, you can!(:
STEP 1: Open iTunes
STEP 2: Navigate to the "iTunes Store". It can be found under the "STORE" tab.
STEP 3: On the right side of the store there should be a "Quick Links" Section. Click on the "Purchased" link.
STEP 4: Navigate to the "Music" tab and click on "All Songs". Then at the bottom of the screen there will be a button that says "Download All". Click the button and your songs will be begin downloading!
NOTE: This will only work with songs that you bought from the iTunes store, if you imported them from a CD, you will have to do it again.
NOTE: You can also do this with Apps, Movies, TV Shows, and Books.
NOTE: You may have to sign in with your Apple ID to verify the download.
Hope this helped! Enjoy your music!(:
Maybe you are looking for
-
Since I have downloaded the free version Maverick OS X, HD version, from the App Store, I haven`t got anymore a clear screen whenever I open a page. Scratches and stripes appear and this is especially annoying when I wanna have a look on my downloade
-
Issue with IDOC occurence and SeeBurger message mapping
Hey Guys While developing a EDI 850 to IDOC scenario i came across this issue with pre-delivered Seeburger mapping(A_850_V4010_to_I_ORDERS05). I actually need to post multiple IDOC's to SAP system in the same message so i changed the IDOC occurence t
-
Catalog manager not showing the tree view
Hey Everyone I cannot see the tree view when i login in the catalog manger in the online mode.What could be the reason? I can see only the \ folder but not the shared,system and users folders.I checked even the instance config file and made sure the
-
SAP provided web services in ECC 6.0
Hi all, I need to consume some web services provided in <a href="http://erptest.esworkplace.sap.com/sap/bc/gui/sap/its/webgui">web services from workplace</a> (workplace user id needed to get access) from my ECC 6.0. I want to install these web servi
-
Monthly payment for Adobe Forms Central
Dear all, I need Adobe Forms Central for my master thesis from now till January 2015. According to the Adobe website I have to pay for one year. Since I am a poor student, do you know how I can solve this? Thank you very much in advance.