I have to send the start impulse from labview to trigger generator?

i have to send a start impulse to the trigger generator, logging the actual time and requesting the actual time code of Digital video recorder.

Hello;
Could you give us more details of your application?
Filipe A.
Applications Engineer
National Instruments

Similar Messages

Re: Teleoperate the Starter Kit from 20 floors away

I have been trying to open the VIs attached to the blog Teleoperate the Starter Kit from 20 floors away most of which open successfully. However when trying to load 'Starter Kit Remote Reciever.vi' I get messages saying that I am missing two VIs and a FPGA bitfile. These being;
"TCP Send Recieve.vi"
"Get Sensor Motor Offset.vi"
"Starter Kit Roamin~F0_FPGA Target_Starter Kit FPGA V~B4.lvbitx"
I have located the TCP VI as per the instructions in the comments on the blog, however cannot find the other two. Where would they be located?
For reference, I am running LabVIEW 2011 (32-bit), and connecting to a Starter Kit 2.0 (DaNI).
Regards
Peter

Dear Clad,
Thank you for the reply.
It's good to know that the serial part is okay except for the missing part. I've editted the code, in which i've replaced the "byte count" with "byte to read" function.
Before this, i assumed that, putting a constant number of "byte count" would be helpful in term of specifying the number of bytes that will be read by the VISA serial. Thank you for your suggestion on this.
I've installed NI FPGA in my computer.
About this:
"Have you linked the I/O that will read out the 'sensor motor offset (rad)', 'stop motors (F)', 'left ccw velocity setpoint (rad/s)', 'right ccw velocity setpoint (rad/s)', 'sensor motor offset (rad)'?"
I'm so sorry, but could you explain more about this?
I assume, the code (Reciever1001) will work alongside these two codes (Bot Command and Control1001) .
Looking forward for your reply
Thanks
Regards,
cawan
Attachments:
BotCommands.ctl ‏5 KB
Control1001.vi ‏50 KB
Receiver1001.vi ‏47 KB

Hello, i have been sent the following email from apple: - You've taken the added security step and provided a rescue email address. Now all you need to do is verify that it belongs to you... and asks for apple login details, is this a genuine request?

Hello, i have been sent the following email from apple, see below and asks for apple login details, is this a genuine request?
Thank you.
You’ve taken the added security step and provided a rescue email address. Now all you need to do is verify that it belongs to you.
The rescue email address that you gave us is [email protected]
Just click the link below to verify, sign in using your Apple ID and password, then follow the prompts.
Verify Now >
The rescue email address is dedicated to your security and allows Apple to get in touch if any account questions come up, such as the need to reset your password or change your security questions. As promised, Apple will never send any announcements or marketing messages to this address.
When using Apple products and services, you’ll still sign in with your primary email address as your Apple ID.
It’s about protecting your identity.
Just so you know, Apple sends out an email whenever someone adds or changes a rescue email address associated with an existing Apple ID. If you received this email in error, don’t worry. It’s likely someone just mistyped their own email address when creating a new Apple ID.
If you have questions or need help, visit the Apple ID Support site.
Thanks again,
Apple Support

In that case, someone is trying to hi-jack your Apple ID.
You should change your password immediately.

Is it true that it will take an Apple Authorized reseller 7-10 days to replace my Magsafe recharger covered by applecare and cannot give me ones available in their shop because they have to send the order to Singapore? Is that not really poor service?

HI, I have a question. I bought my macbook pro along with applecare + which expires in 2013. I bought it in Melboune Australia, however I am currently on a business trip in Pakistan. My Magsafe recharger went bust (not charging at all and leaking oil). Called Apple Australia and spoke to a very helpful service rep. After verification, he told me to take the magsafe to the Apple Authorized reseller in Lahore (Raffles - gave the sellers address and numbers) and they will replace it with a new one immediatley. He also gave me a case number.
Went to the Authorized reseller with macbook and magsafe and gave them the case number along with details about the problem. He told me after an hour of "researching and asking questions" that he will have to send the replacement request to Singapore and it will take atleast 7-10 business days for me to get back a new charger. I asked him why he could not give me the charger which he had on display and in stock at the shop. He said that mine will only be sent by Singapore and it will take that long (was quite rude and uncoperativel!!!!). Are'nt apple authorized resellers here in Lahore Pakistan bound by the same service standards as those in Australia. Maybe apple should really look into who they select as their authorized resellers and the kind of service they are providing to customers! Very Very Dissapointed with the service.
Now I have a major work presentation, and I wanted to find out if this 7-10 business days timeframe is correct as apple servic rep told me it would happen straight away as he had already lodged a case whereas this Apple Authorized reseller is saying 7-10 working days, even when he has the product in stock at the shop!???
Any help/knowledge about someone else who has faced this issue would be appreciated.

AAR's are independent distributors, very rarely have a inventory and have to order everything from Apple on a per need basis.
You would likely get faster response waiting on hold with Apple for three hours and having the new magsafe overnight shipped, or going to a Apple Store and exchanging the Magsafe/buy a new one while waiting for the old one to be replaced.
It's the sad fate of things unfortunately, but likely this has to do with AAR's only making a tiny profit on new hardware sales, them giving you a new Magsafe doesn't make any profit for them, likely Apple doesn't have a reinbursment or takes forever to determine your Magsafe is defective and authorize a replacement cost reinbursement to the AAR.
Think about it, if you were a AAR would you exchange a Magsafe knowing Apple could later determine the defective Magsafe was caused by customer misuse (thus voiding the warrantly/AppleCare) not send you a dime?
<Edited by Host>

My ipod touch is being replaced by a warranty. How do I back up the data? I have to send the old one in first, before receiving the new one.

My ipod touch is being replaced by a warranty. How do I back up the data? I am on a PC. I have to send the old one in before receiving the new one.

See:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

TS4268 Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working

Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working

Hi,
Strikes -
Go into compositionReady and have 3 variables you will be able to set them like this
strike1 = 0;
strike2 = 0;
strike3 = 0;
So on the wrong item click have
if(strike1 == 0) {
PLAY STRIKE1 ANIMATION
strike1 = 1;
else if(strike2 == 0) {
PLAY STRIKE2 ANIMATION
strike2 = 1;
else if(strike3 == 0) {
PLAY STRIKE2 ANIMATION
strike3 = 1;
So this will make it so when the wrong item is clicked each strike will be played in order.
Random Scrolling -
You should look into the Math.Random function to make things random in edge.
This is an example of the Random function. It will generate a random number up to 100.
var random = Math.floor (Math.random () * 100);
Lose Screen Score -
So we can create another variable in compositionReady for the lose score.
score = 0;
Now when the user gains a point to add to the score you could do this code on the click
score++;
which would add 1 to the score, However you can add however much you like to the score doing "score + 2" and so on.
To edit a text with the score at the end which I'm assuming you will want to do you will use .html
so $("Text").html("You score is " + score);
I hope this helps!

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

Can anyone help me verify my account, i have tried sending the e-mail but i am not getting it in my inbox, i have tried a few times.

Can anyone help me to verify my account, i have tried sending the e-mail a few times but it wont send.?

Did you also enter your username/email address and password for the SMTP server? most SMTP servers (used for sending mails) want you to log in or else won't send.
For testing purposes, you can send a message to yourself; as receiving messages is not a problem...

I have to send the sales order output via mail to a customer

have to send the sales order output via mail to a customer, what steps i have to follow
kindly guide me.
regards
satya

Hello,
You need to carru out your output configuration for this.
Use tcode, NACE where you can do this centrally.
Select V1 & click on output types above
Select output type MAIL for your requirement & use tranmission medium as simple mail.
After configuring your MP mail partner functions & use of proper output program you will be able to send mail to your party.
Hope this is helpful to you.
Regards,
Dhananjay

I recently installed a trail version of a software and now to install the full version i have to delete the trail completely from my mac. How do I do that?

I recently installed a trail version of a software and now to install the full version i have to delete the trail completely from my mac. How do I do that?

Welcome to Apple Discussions.
If the new version has an uninstaller run it first. Othewise with Mac OS drag the app to the trash and empty the trash. Do an install if a dialog box asks if you want to replace or keep files with similar names choose replace.

I had my Ipod nano 7Gen factory restored. Nano touch is working smooth without any song init but after i have any of the songs shifted from itune touch buttons get messed up. They don't work. Help me in over coming this issue

I had my Ipod nano 7th Gen factory restored. Nano touch works smooth without any song in-it but after i have any of the songs shifted from itunes, touch buttons get messed up. They don't work. Help me in over coming this issue.

Hello Rohantm,
Thank you for the details of the issue you are experiencing with your iPod nano (7th generation) touch screen. I recommend the following steps for the issue you described (you can skip the steps you have already tried):
Touch screen does not accept input
Clean the screen with a microfiber polishing cloth.
Do not wear gloves while using the touchscreen. Do not use the touchscreen with wet hands or immediately after applying hand lotion. Moisture affects touchscreen behavior in the same manner as it affects a trackpad.
If you have a protective plastic sheet or film on the touchscreen, try removing it, because it may be preventing the touchscreen from working properly.
The current application may be unresponsive; try resetting iPod by pressing and holding the Sleep/Wake button and the Home buttons simultaneously for a least six seconds, until the Apple logo appears.
Sync with iTunes and restore the iPod.
Issue not resolved
If the issue is still not resolved, please read this information on servicing your iPod.
Find the full article here:
iPod nano (7th generation): Hardware troubleshooting
http://support.apple.com/kb/TS4433
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have to customized the number range from 0000000A0000 to 9999999Z9999

Dear all
I have to customized the number range from 0000000A0000 to 9999999Z9999 internally but in tran. MMNR system throws error enter numerical value only.is it not possible to enter alfa numerical number range.Pl. help me.
Reg-AJIT

hi,
Internal No. range can be only numeric and external no. range can be numeric, alphanumeric or alphabetic.
Regards
Priyanka.P

Hi there, I have lost imovie on my iMac after taking it to the shop to get the hard drive replaced. Unfortunately I do not have any of the start up discs. How do I get imovie back on my computer?

Hi there, I have lost imovie on my iMac after taking it to the shop to get the hard drive replaced. Unfortunately I do not have any of the start up discs. How do I get imovie back on my computer?

See this thread:
https://discussions.apple.com/message/20635110#20635110

HT1414 I am going through the process of unlocking my iphone 4 and have had all the go aheads from my service provider but i am still having problems when i plug the phone into itunes. Has anyone else had this program

I am going through the process of unlocking my iphone 4 and have had all the go aheads from my service provider but i am still having problems when i plug the phone into itunes. Has anyone else had this problem??

Umm, what problem? What actually happens when you try to restore it in iTunes?

If I have iWork 09, will I have to buy the new app from the mac store?

I already have iWork 09 on my computers. Will I have to buy the new app from the App Store?

Larry,
After you install Mavericks, run Software Update. You should be offered the updates in the normal update mode. No charge.
Jerry

I have to send the start impulse from labview to trigger generator?

Similar Messages

Maybe you are looking for