I have to switch bluetooth on and off to use bluetooth keyboard??
I'm using an iPad 3G 64GB with my Apple bluetooth keyboard. Everything works great, but one thing annoys me. If I'm using the bluetooth keyboard and then walk away from my desk and lay in bed with my ipad, I cant bring up the software keyboard without turning bluetooth "off." But, if I take my ipad to work (without my keyboard), then bluetooth can be "on," and the software keyboard works fine (because I'm out of range of the Apple keyboard).
I want to be able to leave bluetooth "on" all the time.
Is there any way to force up the software keyboard without switching bluetooth "off" or physically bringing it up using the bluetooth keyboard?
I have the same issue. I know you can turn bluetooth off in "settings" or turn off the apple wireless keyboard when it's near the iPad and it will disconnect.
However, I'm using this for business and I have the autolock turned on. If I'm using the iPad with the wireless keyboard, and I pack up for the day to go, without turning the settings off or the wireless keyboard off, the next time I pull up the iPad, the autolock screen comes up with no place to type (software keyboard). If I don't have the wireless keyboard handy, there is no other way to turn off the bluetooth, or bring up the software keyboard.
There really should be someway to address this. Perhaps when the autolock shows up expecting the wireless keyboard, you could double tap the screen and the software keyboard would appear and/or ask you if you want to turn off the bluetooth connection for the keyboard.
Similar Messages
-
How can I get started please. I have plugged my usb cable into computer. I have the latests verision of Itunes but I cant even set up the ipad because itunes cant see the device
Do you have the most current version of iTunes?
-
Hey guys i have the newest macbook air and i recently bought a magic mouse and my macbook doesn't detect it i already tried switching it on and off and all that other stuff. Any help??
when you have the same issue after the SMC reset:
put new batteries in the MM (even if the others are not empty), turn Bluetooth off then on again on the MBA, take all USB connections out (if any), delete the pairing of the MM and re pair the MM. -
i have just switched to samsung and i have removed the sim from the iphone however i am still receiving texts rather 'imessage' on the old iphone. how do i make sure all messages only come to my new phone??
You can turn iMessage off on your iPhone. That's relatively easy. Since iMessage is an Apple product/service, I have no idea how a Samsung phone will deal with an incoming one. For that answer you should probably contact Samsung support.
-
ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all) -
I am not able to download my files from iCloud to my iPad using iTunes Match, my internet connection is alive as I tested with Safari, I have enabled iTunes Match on and off to be usre is active..but still cannot download....my music
I have the same problem on my Windows 7 computer. In the right-click menu for a song one option is DELETE. However when I click that option the next window is to HIDE instead of DELETE. Apple, please help us with this.
-
How to switch trends on and off in a graph
Hi,
Quite new to this so bear with me. I've numerous temperature sensors I'd like to be able to display on a graphical display. To display all of them on one graph would be a bit of a headache for the user and I don't want numerous graphical displays. I'm after the best way to code this up so I can select the required channels by using individual boolean switches for each channel.
I'm thinking that a switch next to each channel name would be a neat solution to switch channels on and off on the graph.
Thank you
Carl
Solved!
Go to Solution.LabVIEW 2013 has inbuilt Plot Visible selection in Plot Legand in Waveform Graph
-
I have only recently got my iphone, and the screen won't rotate in Safari, the ipod, photos or messaging. It works fine in games (eg Doodle Jump). The screen portrait lock is off, and i have tried turning it on and off and updating it. Why wont it rotate?
Next step is to Restore it in iTunes from your backup. If that does not work they try Restoring it as a new phone. If still no go it is a hardware failure and you will need to get it serviced.
And you are not showing the hardware lock icon on the top right of the home screen? -
My ipad2 has suddenly decided not to connect to the internet either through Safari or email. My WiFi signal is strong and all other devices in my house are connecting ok. I have tried pressing the home and off buttons together to get the Apple Logo but this has not changed anything, still cannot connect. "Safari cannot open the page because your ipad is not connected to the internet"
I have done this and no difference
I have just realised what has caused the problem.
Yesterday I fitted an additional Homeplug with built in wireless N adapter ( I alreday have another type fitted from my main router position) The wireless system to my ipad is obviously "confused" . Having now removed the second homeplug and reset my ipad all is now ok -
My i pod appears to be in a loop it just switches itself on and off
my i pod appears to be in a loop it just switches itself on and off anyone else had this problem if so whats the fix??
RayHave you tried following the steps in these articles:
http://docs.info.apple.com/article.html?artnum=61584
http://docs.info.apple.com/article.html?artnum=304997 -
I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already
It sounds unlikely of course. But from your question it's hard to tell what might have filled your HDD. Are you constantly on file sharing or has filled the drive with movies?
Best way to tell is to start checking what folders occupy space. "Get Info" for the HDD and its subfolders is a way to start checking where the data in question resides.
And as BGreg say, call Apple support is also a good way to begin with. -
My iphone 5 keeps switching itself on and off and screen different colours?
My iphone 5 keeps switching itself on and off randomly, the screen has also gone a green and red colour prior to it turning itself off and sometimes will not come back on unless re-set? help?!
If you already tried a restore to factory settings, it looks like a hardware issue to me.
I would take it to an Apple Store for replacement. -
I got Iphone 3 gs and updated ios 5.01 when charging my phone it keeps switching itself on and off.
Same problem. Phone was unusable. I managed to turn airplane mode on during one of the phone's "on" moments. It went off once more but then came back on and stayed on long enough to back up and restore via iTunes. As I don't rely on the phone to retain photos, contacts or mail etc I chose to do a complete restore and treat it as a new phone. I did this just to make it as clean a restore as possible but you may be able to restore from your backup and get the same fix? All is good still some 24 hours later. Hope this helps.
-
My iphone 4 camera shutter won't open. I have already done a restore and I am using the latest iOS. The front facing camera works during FaceTime but crashes when I switch to rear camera. in Camera mode I can't switch to front camera. I plan on replacing this phone with an iphone 5s when it comes out but I need this phone to work until then.
When you did the restore, did you restore from a backup or restore as new? The final step of user troubleshooting is to restore as a new device, not from a backup. If you restore as a new device and the camera still does not function, it is probably a hardware issue. Make an appointment at the Apple Store Genius Bar and have the device checked by a Genius.
-
I have downloaded MAMP for Mac and want to use it for working with Wordpress. I'm on an Imac with Maverick OS 10.9. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!
It depends on how you installed it. You have to shutdown the MySQL service first. If you used the standard, but obsolete Startup Item, you can do that with the Startup Item. If you created a launchd script, you can do it with launchctl. Once MySQL is no longer running, you can delete the Startup Item or launchd script and the rest of MySQL.
-
I have downloaded iTunes Match to my mac. However when I try to access on my iPad and iphone, it says that I have not subscribed. I have the cloud on my mac showing all the songs there. I have tried turning everything on and off and also backed up again. Any suggestions please?
Home sharing is separate from iTunes Match. Sounds like you were playing music using home sharing, which turned off when you turned off your computer.
Open iTunes on your computer and go to the Store menu. Confirm that there is a setting called Turn Off iTunes Match. That will confirm that iTunes Match is enabled on your computer. Then check to see what Apple ID you subscribed to iTunes Match with. It will be the ID in Store>View Account (in parentheses).
On your iPad, confirm that you are signed in with this same ID in Settings>iTunes & App Store (at the top). If so, you should see an iTunes Match setting listed with an on/off slider. Slide it on to enable iTunes Match on your iPad.
Maybe you are looking for
-
How do I get print to PDF to install using Adobe Acrobat 7 on a 64 bit computer
I just got a new computer at work and installed CS2 with Adobe Acrobat 7. An error popped up during installation saying that the Print to PDF function does not work. Is there a way to fix this? I looked through the discussions and there was not a
-
I have created a simple RPD With 5 tables and joined as below(Snow Flake) T1--> T2-->T3-->T4. when i create a report out of tables t3 and t4, OBIEE is adding the join T2 and T3 even though i dont want it. Any help will be appreciated here... Thanks a
-
Proactive monitoring of failed processes
Hi there, We have a requirement to generate an alert in an external system when a process fails. I understand how to work with failures at an activity level using result handlers and I can execute a custom failure alert process in each activity, howe
-
Have installed and reinstalled flash player, but videos still ask for the latest which I did
I have installed, removed, reinstalled the latest flash player, but the videos still ask me to download the latest Trying to view adobe games STAGEJUK3D it tells me you need the latest Adobe Flash plugin to enjoy this INSTALL FLASH PLAYER 11
-
Data base panel not displaying recordset info
I am using dreamweaver cs4 running on i mac Problem the descriptions in my database panel are not displaying on the bindings tab the recordsets just abreviate to "reco" and when I expand a record set all I see is the llighting bolt I want to be able