I have to trigger BUS2012 RELEASESTEPCREATED, when a change in PO happens.

Hi,
When CHANGED event for BUS2012 happens. I need the release code to also get passed as an event parameter. Let me know, how this can be achieved.
Thanks,
Sukumar.

Hi,
once changed event gets triggerd , write a background method which fetches release code
pass po no to Ekko u will get FRGGR-release group
                                                 FRGSX-Release Strategy
                                                FRGKE-Release Indicator: Purchasing Document (Blocked Or released)
                                                FRGZU-Release status If 1st level is released this value will be x
                                                                                2nd level is released this value is xx, 3rd xxx
      by using frgzu   u can identify which level needs to be released
Pass FRGGR-release group
         FRGSX-Release Strategy(we got From EKKO) to   T16FS TAble u will get all the release codes for that PO
by Using FRGZU value   u can identify which level needs to be released and get that release code   and pass it.
Please revert back incase of any queries

Similar Messages

Hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be which is it had a green colour on it's side.what can i do to fix it and what is the reason for it?

hi i have a macbook pro and when i changed the hard drive the screen wasn't as it was supposed to be it was green on it's side and blurred.what can i do to fix it and what is the reason?

either something got damaged when you installed the hard drive or you need to perform a pram reset (other possibilites could have occured, these are the ones I think)
PRAM http://support.apple.com/kb/ht1379

I cant change the old icloud mail to a new one because i have lost my password , and when i changed it in ap-id page it still remains the same, nothing changes .

cant change the old icloud mail to a new one because i have lost my password , and when i changed it in ap-id page it still remains the same, nothing changes .
What do do ????

You do not have to call US, but you need to call. Or else.
Contact Apple for support and service - Apple Support

How to trigger outbound IDOC when data changed in BP through Inbound IDOC.

Hi,
    In our system whenever we create a new Business Partner, these data is send across to SAP R/3 (as BDOC) and to Mainframe system (as outbound IDOC). Whenever we change any Business Partner record the data is send across to SAP R/3 (BDOC) and to Mainframe system (as outbound IDOC).
    This functionality is working fine.
    Currently we are getting a value for one standard field (Customer_Group3) of Business Partner as an inbound IDOC. The value of the inbound IDOC is reflecting in the field (Customer_Group3) in Business Partner Transaction. Once the inbound IDOC is received, the modified value is send across to SAP R/3 as BDOC. But the modified value is not send across to Mainframe system (outbound IDOC). The outbound IDOC is not getting triggered.
Kindly help

Is your mainframe system configured as Site in SMOEAC. If so are you using XIF Adapter.

Google Calendar keeps loading when making changes - doesn't happen with Chrome.

When I fill in information on Google Calendar edit page (and add or try to change, save or delete an entry, it, it says loading but nothing is happening. If I use Chrome, not Firefox, I have no problem. this is a relatively new occurane as it didn't happen a while ago as Ive been using Firefox since its inception.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

I have a hp laserjet 600 m602 that will print 8 1/2 by 11 prints at 50 ppm when I change to custom

I have a laserjet 600 m602 when I change it to custom it prints so slow its going backwards is there any way around this
the paper is 8 1/2 by 10 1/2 actually shorter why does it take longer

HI JOHNS55,
I hope you are doing well and welcome to the HP forums;
Quick suggestion if you are refering to the HP LaserJet Enterprise 600 Printer M602, This is a commercial product. I suggest searching and even posting in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Hope you find the help you need,
RobertoR
Remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Why do I have to contact support every time I change payment method

i have ate to contact support when I change payment method why

We are fellow users, we won't know why. If you are frequently changing your payment method then that might be why - if you've got the message to contact them again then you could see if they can see why it's happening and if they or you can do anything to stop it happening.

Trigger a Workflow when a date is reached in SharePoint Online

I have created a simple list workflow (SharePoint Online) which emails a user, informing them a Document's
Target Closure Date has been reached. The workflow works fine when started manually.
I want to trigger the workflow only when Target Closure Date matches today's date.
The best solution seemed to be to use a Retention Policy. So I went to:
> Library Settings
> Information Management Policy settings
> Document content type
> ticked 'Enable Retention'
> Time Period: Target Closure Date + 0 days
> Action: Start the relevant workflow.
This worked only on two occasions - both were Saturday mornings, at 3.30am and 4.30am. I can see
in this MS article the Expiration Policy timer job only runs weekly on SharePoint 2013, so can anyone confirm that the schedule is the same in SharePoint Online?
If so, is there any way in SharePoint Online I can trigger a workflow when a date is reached?
Thanks for your help,
Alyosha

Hi Alyosha,
According to your description, my understanding is that you want to send an email to a user when the Target Closure Date was reached in SharePoint Online.
The timer job of Retention Policy runs weekly in SharePoint Online, so we cannot use the Retention Policy to trigger the workflow.
As a workaround, I recommend to create a workflow associated with the library to send the email when the Target Closure Date was reached.
Here are the detailed steps:
Create a workflow associated with the library and set the workflow to start when an item is created.
Select Pause until Date to set the workflow to pause until the Target Closure Date.
Select Send an Email.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Trigger Appraisal WF when ever Appraisal document created in APPCREATE

Hi Experts,
I am working on Appraisal workflow. When ever Appraisal document is created through APPCREATE I have to trigger wf and work item should be send to Reporting manager for starting the workflow. My problem is WF is not getting triggered when Appraisal document is created. In BO APPR_DOC there is no event for Appraisal document create. Here in this workflow appraisee will not initiate the process and appraisal will be completed by Reporting manager, Parat appraisal and Reviewer.
Can anybody please suggest me how to proceed now.
Regards.
Ranganadh.

Hi Vikram,
Thank you for the reply. Now I can able to trigger the wf when appraisal doc creted through phap_create. In my requirement appraisee is not required in the process. when I click on other appraisers I am getting the appraisee name by itself from the employee field. and when ever I click reporting officer I should get the Reporting officer name by default.
Can you please suggest how can I default the Reporting officer in the Reporting Officer field of appcreate's first screen and to delete the appraisee name when I click on other appraisers.
I am getting the reporting officer name in "Other Appraisers" by selecting the reporting officer inthe listbox. but not the initial screen of appcreate. Can you please specify any BAd's for this.
Thank you.
Regards.
Ranganadh.

How to trigger so action when ServerletOuput stream writes all data as byte

Hi ,
I have a servlet which accepts the index , size of a .3gp file in bytes as input parameters.
If index=0 ...i am reading whole file into buffered input streame and writing to client as Servlet output steam as bytes.
If index !=0 , or index=100 ...say suppose
im ommiting first 100 bytes and rading101 byte to till the end of file in to buffered input streame and writing to client as Servlet output steam as bytes.
Here i would like to trigger some action when the servlet writes entire bytes to the client .
But im not able to notify exactly when the connection can close between client and server.
Can any one help me to overcome this.
Thanks in advance.

Hi ,
Thanks for reply..
But reallu i couldnt get you.
please go though the code snippet i have...and suggest me.
try{
File fFile = new File (fileName);
BufferedInputStream bif = new BufferedInputStream(new FileInputStream(fFile));
bif.skip(Integer.parseInt(((DownloadFileForm)o).getIndex()));
int byteSize = (bif.available() < Integer.parseInt(((DownloadFileForm)o).getSize())) ? bif.available() : Integer.parseInt(((DownloadFileForm)o).getSize());
byte[] b = new byte[byteSize];
bif.read(b, 0, byteSize);
sosStream = response.getOutputStream();
sosStream.write(b);
// here i have to do something
sosStream.close();
logger.info("file has been downloaded from Server is sending out to client");
}catch(Exception e)
// e.printStackTrace();
logger.info("Exception :"+e.toString());
regards,

Cannot have execute_query in post-change but can have it when-radio-changed

why is it possible to put execute_query in a when-radio-changed trigger but one cannot put it in
a post-change or post-text-item trigger? (11.1.1.4)
For example I want to ask for a year, and a month. I don't much feel like creating radio items for all those years. Whenever a year
or a month is changed I want it to reconstruct the where clause and execute the query. But the year not being a radio group
is more problematic about how to get execute_query to run. What is thinking here? I think that a text item post-change deserves as much power as a radio_group change! It's unfair.

Over the years, I have found that the people that complain about Oracle Forms the most are the people that refuse to learn how Oracle Forms works. You can't expect to develop in a any framework unless you learn the rules of the framework. I've seen numerous complaints about the lack of documentation on Forms and yet the single most important form of documentation is the Oracle Forms Help system. The answer to virtually every question you might have can be found in the Forms help system, but it helps to understand a little about how Forms functions so you can ask the right questions in the help system.
I also find it hard to understand how an employer will throw someone, with little or no exposure to Oracle Forms, into a Forms project and expect them to "Pick it up" along the way rather than take the time and expense to send them to an Oracle Forms class. How can the employer expect the employee to be successful if they are unwilling to give them the resources they need to be successful. If you are one of the unfortunates that are in this situation, then you could at least perform a simple Google search on "Forms Tutorials" and you will find numerous on-line "Free" tutorials. Don't worry about the Forms version used by these tutorials as you are only going through the tutorial to learn how to create a Form and how the Forms tool interacts with the database; which is doesn't matter which Forms version you are using because this part hasn't changed all that much between the Forms versions.
There are even some really good books (however, quite old) that you can purchase that teach you all the basics of Oracle Forms. Here are just a few:
Developing Oracle Forms Applications by Albert Lulushi
Oracle Forms Developer's Handbook by Albert Lulushi
Oracle Developer: Advanced Forms and Reports by Peter Koletske
Programming with Oracle Developer by Matthew BennettThese are just a few books and yes they are all for older versions of Oracle Forms. But the concepts you will learn apply to any Forms version.
While I admit that it is inconvenient that I can't call a Restricted built-in from certain triggers once you understand the reasons why you can't call Restricted built-ins it make sense why Oracle built their event model the way they did. By calling certain restricted built-ins in a trigger, such as the When-Validate-Item trigger, you could very easily cause an an endless loop to occur in your application. For example, if you were allowed to call the GO_BLOCK or GO_ITEM built-ins from a When-Validate-Item trigger you could cause cascading validation events to occur. While this is not a bad thing in and of itself, but what would happen if I sent the Forms Navigation cursor to go to an item before I had completed my validation logic. The item I sent the cursor too also happens to have validation logic assigned to it that just so happens to send the navigation cursor to the item I just left. Understand, the first item has not yet completed it's validation process and the second item sends the cursor right back the first item - which triggers a new validation event on the first item. Now I've got compounding events in the execution stack and I've put my application into a loop that I will never get out of because I've got validation logic that never completes successfully so the validation event never exits - it just keeps running and running.
At first, you might say that it is the developers responsibility to ensure this does not happen and the developer should be more careful with their code to prevent this from happening and you would be right. We (developers) are responsible for writing safe code. However, after a while, software manufacturers eventually put restrictions in place because there are enough irresponsible developers out there causing problems and the only way to fix the issue is through the use of framework restrictions.
Having said that, Oracle Forms has certain restrictions for good reasons. Because you don't understand what those reasons are is not a good reason to complain about the restrictions. Rather, I would hope, that your lack of understanding of a particular framework/methodology would encourage you discover the "Why's" and "How come's" of the framework.
The simple fact of the matter is you cannot be successful with Oracle Forms unless you learn how to program within the Forms Framework. You can't take C++, Java or any other programming language and apply the rules of programming these languages to Forms. You absolutely must learn how Oracle Forms operates and what the rules are for developing successful Forms applications.
That's my two cents on the topic. I'm trying to start a flame war; I'm just tired of hearing people complain about Forms just because they don't understand or haven't taken the time to understand how Forms operations and what the rules are for developing within Oracle Forms.
Sincerely,
Craig...
Edited by: CraigB on Aug 2, 2011 12:38 PM

How to trigger a workflow when a info record is changed?

Hello All,
I would like to trigger a workflow when the conditions from a info record are changed?
What business object should be used?
Thanks in Advance
Rui

Hi,
for these kinds of issues,
foirst check if a uefull event already exists in the system
for this you first actiave the event trace: SWELS.
Then you change the info record.
And then you read the event log with SWEL.
If there's no event, you may eventually have to create it in an exit with SAP_WAPI_CREATE_EVENT fm
Kind regards, Rob Dielemans

How to trigger a workflow when data inside a table changes

Hi
How to trigger a workflow when data inside a table changes ??
We need to trigger a workflow when STAT2 field value in PA0000 table changes.
rgds
Chemmanz

Make use of Business Object BUS1065. In this business Object you have an attribute Status which you can use. There are a number of events that will get triggered when the status is changed.
Thanks
Arghadip

Trigger an Idoc when a sale order is been opened in VA02 & saved

Hi Experts
     I have a requirement to trigger an Idoc when a sale order is been opened in VA02 transaction and saved.
Now that I have attained the same through Message Control Settings and Nace out put type settings with Multiple Issuing.
Here in the Idoc will be triggered when the user makes any changes in the order based on the NAST table entry.
Now my requirement is that the Idoc has to be processed even if there is no changes made to the document when the user opens the sale order and clicks save.
This is the process been carried out to re-process the Idoc.
Now that the Idoc is triggered using the path ---> menu - extras -output - header- edit & save.
Now that the user need to process the Idoc by just opening the order in VA02 and click save.
How can this be attained ? is there any configuration for it ?
Or is it possible to handle the same in any of the user exit ?
the problem is the user exit save gets triggered only when there is any change in the document else it throws a msg " No changes made"

Hi Niraj
   Thanks for your Response.
Now that the output control works fine when there is any change made to the document.
Now that i need to configure such a way that the output control triggers even if there is no change to the document and save   button is clicked.
Can U please elaborate how do i make settings in VOFM-> Output Control ?
Thanks
Sathish

Trigger Adjustment postings when Expense type is changed.

All,
I have a situation where I would like to trigger and adjustment when the expense type is changed. The issue is that the GL account for the two expense types are the same and no adjustment is triggered. while the Expense type, wage type, and descriptions are different. all of this is by design.
As the GL interface is not triggered the table PTRV_ROT_AWKEY- Assignment of Trip Results to Posting Doc. Number and Line- is not updated with the modified details.
How can we trigger adjustment postings when the expense type is changed?
Best Regards,
Martin

I am closing this question.
- I have referred this to SAP OSS for review.

I have to trigger BUS2012 RELEASESTEPCREATED, when a change in PO happens.

Similar Messages

Maybe you are looking for