I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do?

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do? Can I find the original serial number in my old Imac?

You'll have to contact Apple. See Pro Application Replacement Serial Numbers

Similar Messages

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

I am trying to setup wireless using my old dome Airport ExtremeBase station. I had previously used it about 5 years ago when I had dial up but have now switche to DSL with Windstream. I can not get connecte as ABS keeps trying to dial up(the phone number)

I am trying to setup wireless using my old dome Airport Extreme Base station. I had previously used it about 5 years ago when I had dial up but have now switched to DSL with Windstream. I can not get connected as the ABS keeps trying to dial up(the old phone number). When I tried to change my network settings an annoying popup window says "your network settings have been changed by another application'. I have no idea what the message is all about and when I close this window it immediately pops up again and prevents me -as far as I can tell -from changing my Airport settings? I need advice on how to get this wireless setup done. Maybe a reset? or something else? I have the DSL phone line plugged into WIndsteam Seimens Speedstream 4200 modem and then the ethernet (yellow) wire from the WIndsteam Seimens Speedstream 4200 modem to the port on the dome that is a circle of dots.

1)Can you explain how using the AEBS as a bridge will work with the Seimens Speedstream4200?
As a bridge, the AEBS will basically become a wireless access point. This will allow the AEBS to provide a wireless network, but still allow the Speedstream to provide NAT & DHCP services for the wireless clients connected to the AEBS. If the AEBS was left as a router, you would have a double-NAT condition which isn't necessary bad in itself, but would create a second subnet. That would make it more difficult for clients connected to the AEBS to access clients connected to the Speedstream.
2) Is there a link that will guide me through the steps to set the AEBS as a bridge?
You can easily reconfigure the AEBS as a bridge using the AirPort Utility.
ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode)
3)Can I just connect the DSL phone line to the AEBS and eliminate the Speedstream4200?
Unfortunately no. The AEBS does not have a built-in DSL modem. You will still need the Speedstream to provide this function.

HT4889 Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

Hi. I`ve just started transferring from my old Imac to a new Macbook, using the WIFI. But I realize it will take days to get it done. Can I cancel the process, and start over again using the thunderbolt port? Without causing any trouble?

See Pondini's Setup New Mac guide for possible answers.

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase and start over?

I was transferring data from my old iMac to my new iMac via Time Machine. After about 4 hours, the electrical power fluctuated and turned off my wi-fi. Now most of my necessary programs are useless. How do I erase that mess and start over?

Hello there, LynnS.
The following Knowledge Base article and it's referenced link should get you started with the Erase and Install of Mavericks:
OS X Mavericks: Erase and reinstall OS X
http://support.apple.com/kb/PH14243
Once you've gone through those 2 articles, this article should help you with restoring from your Time Machine Backup:
OS X Mavericks: Recover your entire system
http://support.apple.com/kb/PH14185
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

What is the best way to transfer my date from my old iMac to my new iMac?

what is the best way to transfer my date from my old iMac to my new iMac? I don't have a time capsule, so I cannot use time machine.
thanks

Your best bet by far is to use Setup Assistant when the new Mac first starts up to transfer directly from the old one.
It's similar to Migration Assistant, but doing it that way will avoid having an extra user account.
Either way, you can connect them via FireWire, Thunderbolt, or your network, but avoid wireless if at all possible. You can connect both to your netwrork via Ethernet, or put a single cable between the two.
See Using Setup Assistant on Mountain Lion or Lion for details.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How do I transfer files from my old iMac to my new Pro laptop?

How do I transfer files from my old iMac to my new Pro laptop?

If you can get both computers on the Internet at the same time without re-cabling, you have the connection infrastructure needed to enable file sharing and share those files.
That said, many users find it easier to use FireWire Target Disk mode to treat the old computer as a big Hard drive, and just drag and drop the files, or use Migration Assistant or Setup Assistent.
There is a really good guide here:
http://pondini.org/OSX/Setup.html

I can't migrate files from my old imac to a new one.

I can't migrate files from my old imac to a new one. I'm using a firewire 800 to a thunderboldlt adapter, my new imac doesn't find the source. Would a usb 2 to usb 2 work?

Did you put your old iMac in Target Disk mode? You need to do this to use Migration Assistant to transfer your files to the new iMac.
Hold the T key while your old iMac is starting up to start up in Target Disk mode. After doing this, your new iMac will detect it as an external drive, so now you can transfer your files through Setup Assistant or Migration Assistant. See > http://support.apple.com/kb/HT5872?viewlocale=en_US

How do you migrate itunes and iphoto from an old imac to a new imac

I am trying to move my existing itunes and iphoto libraries from an old iMac to a new iMac. Migration Assistant does not seem to have any way of doing this. What would be the best way to migrate these to the new iMac? Thank you.

See Here
Transfer from Old to New
http://web.me.com/pondini/AppleTips/Setup.html

How do I transfer my i photo '08 contents from my old imac to a new imac?

I would like to know how i can move all the contents of my i photo '08 from my old imac to a new imac. I am worried about the photo's in the web gallery. I would like to keep them and carry them over to the new imac since the old mac will be used by someone else and i would probably need to vacate the pictures on file there. Same goes for the itunes.
Hope someone can help here.

kcychua
Welcome to the Apple Discussions.
Use Migration Assistant on the new Mac to move your User Account over. This will move iPhoto, Itunes libraries and your personal settings - including your .Mac/MobileMe settings.
Regards
TD

How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

Hi,
Try Target Disk Mode
OS X Yosemite: Transfer files between two computers using target disk mode
There is also Migration Assistant.
OS X Yosemite: Transfer your info from a computer or storage device

How do i transfer data from my old imac to my new imac?

I WANT TO BUY A NEW IMAC. HOW DO I TRANSFER MY DATA FROM MY OLD IMAC TO MY NEW ONE??

First please do not type in all caps, it is considered shouting and we can hear you just fine.
To migrage your data please carefully read Pondini's guide, it will supply everything you need. Just click Lion or Mountain Lion Setup Assistant tips

When transferring data from my old iMac to a newer one do the old Apple apps like iWorks override the new versions installed on the newer computer?

When transferring data from an older iMac to a newer iMac (refurbished) do the Apple applications like iWorks replace the ones on the newer computer?
I have read how to transfer data and using setup assistant but I am concerned about applications from Apple having the same names.

As you likely know legacy apps that are PPC based will not migrate over. However the data files will. I would urge you to inventory the apps you have and their data files to see how important they are and then look app by app to see what app replacements are available. If you are using Office for Mac prior to the 2008 version you will need to get a new license of the app because the 2004 version was PPC based. The files will come over and are readable by newer version of Office for Mac (I recommend the 2011 version) and also readable by the iWorks apps (Pages, Numbers, Keynote) but those are different apps than Office and work differently and do not have all of the features of the MS Office apps. This is really only a issue if you share files with MS Office users, if you use them for personal work then iWork may be just fine for your needs.

I moved from an old macbook to a new one. I copied all my files onto a hard drive. On trying to setup my mail, i went into documents, microsoft user identities, office 2011 and it shows the database but wont let me select it. Urgent help pls

I moved from an old macbook to a new one. I have installed Office for Mac 2011. I copied all my files from my old notebook onto a hard drive. On trying to setup my mail, i went into my hard drive and accessed microsoft user identities, office 2011 and it shows the database but wont let me select it. Its almost as if the file is there but not accessable. I desperately need to access my old mail. How do I do this? I am fairly confident that I copied all files off my old notebook. Is there a way for me to search for the Database file? Maybe I copied it to a different location? Urgent help please.

Hello mafrerichs and welcome to Apple Support Communities,
Simplest way is to use Target Disk mode:
How to use and troubleshoot FireWire target disk mode - Apple Support
and hook to another Mac and use CCC or SuperDuper and clone your HD to another drive.
You could also pull the drive out of your MBP and use an external USB case or SATA - USB dongle to hook it to another Mac.
"MacBook Pro (15-inch Late 2011),... have a 15" 2012 Macbook pro with 2gb of ram, i7 processor"
That's a little confusing?

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do?

Similar Messages

Maybe you are looking for