I have transport Infoset and Query from DEV to QAS

Dear Expert,
I have created an Infoset and Query. My Infoset and My Query have been copied to Query Global Areas and have been transport to QAS server. (I have created Request Transport, the number request is generated by system in DEV)
But when I look with tcode SQ01 and SQ02 in QAS, there are none of my infoset or query appeared.
Please, what should I do?
Best regards,
Dedy.W

Check wether yr request transported correctly since these type of requests generally locked..
After removing lock only we can transport these..
Check in quality..
Tcode.. STMS
Check here for yr request wether transported or not..

Similar Messages

  • Transport Questions and Questionnaires from Dev to QAS or to PRD

    Question
    How do we transport questions and questionnaires from dev to QAS or to PRD. Do you type all them again or there is process no. What is best process others do
    Answer
    As you must be aware, Questionnaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
    At least Iu2019m not aware of any other way to move the Questionnaire details across clients.
    I know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment
    Any body has soloution ?
    Thanks.
    Saquib
    http://aspirehr.com/HCM_solutions/hcm_solutions.asp

    Hi Vishal,
    As you must be aware, Questionaires are updated from a Recruiter start page in the front end which cannot be saved in a change request.
    Atleast i'm not aware of any other way to move the Questionnnaire details across clients.
    i know that it is quite a bit of a task to repeat the activity of maintaining questions and response in questionnaire/s across clients, particularly When you have to maintain big questionnaires (with lots of questions & multiple responses).But As it is , Process templates, Questionnnaires have been considered as a recruiters day-to-day administration task in SAP which has to be done from the front end even in live environment.
    So if you are a part of the Implementation Consulting team, it is your responsibility to train the core team in doing the activity in live environment. Hope this information helps.
    Best regards
    G Raj

  • Transporting an ABAP query from DEV to QAS/PRD

    Hi all,
    I am trying to modify an existing query in DEV and move it to QAS and then to PRD. After making the changes in DEV, there was new transport request created, in which I had the changes for the query and in se93, i changed the name of the prog to the newly generated prog. after moving the transport to QAS, it is giving me a dump saying that the new prog generated in dev does not exist in QAS and hence the tcode does not work.
    after that i tried with the standard SAP report "rsaqr3tr" and tried to make another transport assuming that the program would be together with the transaction and will be transported together. But this does not work.
    I need help regarding this please - since it is an urgent rek - how do i transport the query after making changes to the already existing one - from DEV to QAS or PRD?
    Please explain in detail where and what I am missing.
    Thanks!
    Related answers are appreciated and rewarded.

    Hi Shyam.
    I would like to suggest a few references,
    [SDN - References for Query related to transport request|Query Related to Transport Request;
    [SDN - Reference for Transport Management System (TMS)|Transport Management System (TMS) of R/3;
    [SDN - Reference for Transport Request Problem|Transport reruest problem............;
    [SDN - Reference for Transport request Query|Query Transport;
    Hope that's usefull.
    Good Luck & Regards.
    Harsh Dave

  • Problem while transporting Screen exit object from DEV to QAS client

    Hello All,
    I have developed screen exit for tcode 'ME51N' to add customer field in newly added TAB. To grayout that field in display mode, I have added code on the PBO event of that screen. Code for PBO even has been written inside the include. Exit is working fine on development client.
    After transporting the exit on QAS client the field graying out functionality in diplay mode is not working eventhough the include which contains the code for PBO even is exist on QAS. Also in flow logic if i double clock on the PBO module event, it says object does not exist, eventhough the include which contains the PBO event code exist in QAS.
    Please, help me to understand why the linkage between flow logic PBO event and the include where the PBO code has been written is not getting transported from DEV to QAS.

    Hi,
    First check the TR log if there is any errors. If no errors, then check if all the objects were properly transported or not.
    You might have missed out in transporting the enhancement activation(CMOD).
    Try to Rebuild the object list for updating the navigation index. You can do this from SE80=>Rightclick on function group=>More functions=>Rebuild object list.
    Thanks,
    Vinod.

  • How to move PI objects in IR and ID from DEV to QAS

    Hi experts,
             I am new to PI and with lot of research and help from you all experts I could successfully create a scenario from XML to CSV conversion. I created message interface, interface mapping objects etc.. in "Integration Repository" and conficguration scenario, sender and receiver communication channels etc. in "Integration directory". Everything is working fine in DEV and now I want to move all these to QAS. I went through some documents on SDN and it was talking about XI track and CTS and I am so new to all these, I am not sure how to get started. Could someone please let me know the procedure of moving PI objects from DEV to QAS?
    Thanks.
    --Mithun

    Not to Worry Mithun Da!
    There are two ways to transport  ID and IR Object to transport .
    1. CTS + : Totally automated Way .,
    2. .tpz  : Manual  Lagacy Import / Import way .
    Now . Steps .are :
    There are two types of transport mechanisms in XI/PI.
    1.      File Transport System.
    Files are imported and exported into SAP XI OS Level for Development and Quality Server,
    This Process is risky as there is no automated system and there is no track record of imported or Exported Files,
    as in this syetem exported files are transported to QA System from DEV System.
    file Extension in file transport System : - .tpz
    2.     Through CTMS(Change Transport Managment System).
    GUI Based tool, Installed on SAP XI BOX, This system provides the automated transport system , which keep tracks of transported Objects and Failed objects.
    There are initial level efforts to set up transport system.
    Transport Procedure for Various System :-
    DESIGN OBJECTS ---> (ENTERPRISE SERVICE REPSITORY OBJECTS) -
    > INTEGRATION BUILDER.
    Step -I
    1. Select NameSpace to trasport.
    2. Right Click on NameSpace to Transport.
    3. Select Export Option.
    4. Check or Select the Software Component Version.
    5. Check the Mode of transport.
    CTS MOde:-
    5.1     Select a required type of Object Set:
         IN OUR CASE: ALL OBJECT OF INDIVIDUAL NAMESPACE.
    5.2        Select Transort request.
    5.3      Finish the Process.
    TRANSPORT USING FILE SYSTEM:-
    5.1     Select a required type of Object Set:
         IN OUR CASE: ALL OBJECT OF INDIVIDUAL NAMESPACE.
    5.2      Finish the Process.
    Step II
    1. GO TO TOOLS OPTION IN MENU BAR
    2. OPEN CTS TRANSPORT ORGANIZER
    3. Select the request to Release.
    4. Press Button Release.
    Step III( Steps to be Perform at Target System).
    1. Execute Transection Code STMS.
    2. Check your Transport Request Number.
    3. Focus on that Trasport Request Number Through Mouse.
    4. Now Import The Transport Request on Specific client of Target System.
    5.Click Ok.
    FINAL :-  NOw on Quality Server all Transported Objects Need to be activated.
    CONFIGURATION OBJECTS ---> (INTEGRATION DIRECTORY) -
    > INTEGRATION BUILDER.
    Step -I
    1. Select Configuration Scenario to trasport.
    2. Right Click on Configuration Scenario to Transport.
    3. Select Export Option.
    4. Check or Select the Configuration Scenario.
    5. Check the Mode of transport.
    CTS MOde:-
    5.1     Select a required type of Object Set:
         IN OUR CASE: ALL OBJECT OF Selected Scenario.
    5.2        Select Transort request.
    5.3      Finish the Process.
    TRANSPORT USING FILE SYSTEM:-
    5.1     Select a required type of Object Set:
         IN OUR CASE: ALL OBJECT OF Selected Scenario.
    5.2      Finish the Process.
    Step II
    1. GO TO TOOLS OPTION IN MENU BAR
    2. OPEN CTS TRANSPORT ORGANIZER
    3. Select the request to Release.
    4. Press Button Release.
    Step III( Steps to be Perform at Target System).
    1. Execute Transection Code STMS.
    2. Check your Transport Request Number.
    3. Focus on that Trasport Request Number Through Mouse.
    4. Now Import The Transport Request on Specific client of Target System.
    5.Click Ok.
    FINAL :-  NOw on Quality Server all Transported Objects Need to be activated( CHANGE OBJECTS).

  • Transporting a SAP Query from DEV to PRD

    Hi,
    We created a Query Report using SQ03, SQ02 and SQ01 for Travel Report in DEV and is working fine. Now, we want to move this query to PRD. For this, we tried create a Transport using SQ02>Environment>Transports and finally a transport request was generated and moved to PRD.
    But the requisite Query, Infosets and User Groups are not there in PRD. Are we using the correct approach to Transport a Query to PRD?
    Please help.
    Regards,
    CMC Team

    1. While saving User Group in SQ03, save it in correct Package (not as Local Object) and a Transport Request will be created.
    2. Create Infoset in SQ02 and save it in same Transport which was created in Step 1 above.
    3. Create Query in SQ01 and again it in same Transport which was created in Step 1 above.
    Release this Transport Request and move to PRD.
    Hope it will help you.

  • Transporting SQ01 Customer Query from DEV to PRD

    Hi All,
    I am not sure whether I am in the right forum, but maybe you still can help me.
    I created SQ01 for Customer Master query in our DEV environment, and i assigned t-code for the query.
    Can i transport it in our PRD? Or it is more advisable to create the t-code in PRD directly?
    Please note that the query is both existing in DEV and PRD.
    Hoping for your positive feedback.
    Thank you.

    Hai TINA,
    Hope you would have created T code using SE93 for your query program.
    and your SQ01 program may be like this, and in the program the bold letter differs from client to client.
    AQ    FU  SYSTQV000003XXXXXXX===
    AQ    IC   SYSTQV000003XXXXXXX===
    So while transporting it may give error that the program is not in the client, or while executing the T CODE it may give dump.
    Hence create the query in production client and create the T code for the program and assign to the users.
    Some tips may be helpful:
    1. Always Use T code : SQVI to create the ALV report, user friendly that SQ01.
    2. In case if you are making Customer master details report, if you are include all customer master tables, in case for some customer if some details were not maintained then the details will not displayed.
    In that case, in the joint between two respective tables, right click and change it to Left Outer join.
    3. If some data is replicated, then need to change the table path, like in case of billing always start from Biling item then to Billing header.
    Regards,
    Mani

  • How to transport the modified Query from DEV to QA

    Hi BW users,
    I have made few changes for existing query and transported to QA and the changes are reflecting in QA .But did n't transported to Production .and Now I have to added one more InfoObject.
    Now Can I add that Info Object in QA  it self or Do I need to add the New Info Object in DEV and Transport it to QA again.
    Please let me know as it is very urgent to me.
    Thanks in Advance
    Sanjay M

    Hi Sanjay,
        Any changes you should to in DEV only. Do changes in DEV and move transport to Quality and subsequently to Production.

  • Transported query from DEV to QAS no applicable data

    Hi all, any idea why queries transported from a DEV system to a QAS system will not execute?  I am getting no applicable data even though the data is in the cube. I am not having much luck with new queries either.  Please advise.  Anna Marie

    Hi Anna,
    Looks really strange...
    Are you sure data is reportable on your InfoCubes on QAS? (do you see the table icon on the right of all request ids?).
    Are you sure query is not filtering too much data? Please, check this by displaying filtered values with 'Display text elements -> All' on BEx Toolbar.
    Regards,
    David.

  • Error when transporting datasource and transformation from DEV to QA

    I'm attempting to transport a DataSource that was converted to 7.0 from 3.x along with its transformation to QA I receive the following log error. I've most post in regards to very similar errors but nothing showing 'Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L' what is this?
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
    Activation of Objects with Type Transformation
    Checking Objects with Type Transformation
    Checking Transformation 0R526789C2X70Q5XBGCAQ0G3Y4Q7LV9A
    No rule exists
    Saving Objects with Type Transformation
    Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Delete Mode)
    Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L
    RS_AFTER_IMPORT belongs to package RS
    The errors affect the following components:
       BW-WHM (Warehouse Management)
    Post-import method RS_AFTER_IMPORT completed for RSDS L, date and time: 20071018113149
    Post-import methods of change/transport request D30K913684 completed
         Start of subsequent processing ... 20071018113116
         End of subsequent processing... 20071018113149
    Execute reports for change/transport request: D30K913684
    Reports for change/transport request D30K913684 have been executed
         Start of................ 20071018113149
         End of.................. 20071018113149
    Execution of programs after import (XPRA)
    End date and time : 20071018113149
    Ended with return code:  ===> 8 <===

    Hi Davis,
    Before transporting transformation make sure either of source or target should availble in target system.
    suppose you have a transformation between Data source and Data Target, first transport Data source, then transport Transformation along with data target.
    Before tansporting Transformation either source or target should be avaialble in QA system..then only transportation will happen smoothly..
    Hope this helps.
    regards
    SK

  • How to transport BO report from Dev to Qas

    Dear all,
    We have three clients for BO, Dev,Qas and Prd. When we transport the BO reports from Dev to Qas, the  parameters in Universe and QAAWS won't be changed automatically,just keep the setting in Dev.
    what can I do to change the setting automatically?
    Best regards
    Tianli

    Hi,
    you can ask basis to maintain logical system conversion settings .
    However  if you post the Query in BO forums you would get better response.
    Regards,
    Satya

  • Unable to transport Integratin Builder objects from Dev to QA correctly

    Hi,
    System : Pi 711 SPS03
    SLD 7.1 with  latest model and content
    We are trying to transport Integration Builder Objects from Dev to QAS, but the SID translation from DEV to QAS is not working.
    The interface is being imported as the source SID.
    We checked the SLD configuration for Transport targets, that is when we realised the below issue.
    Unable to Assign Business Systems in respective Business System Groups
    The expected configuration of the SLD is as below:
    UKD_400  - Integration Server for Dev PI 711 server
    INTEGRATION_SERVER_UKQ - Integration Server for QAS PI 711 server
    XI_QA - Business System Group for all Quality Systems in the landscape
              1) UKD_400
              2) UC1_ECC_60
              3) UED_400
    XI_DEV - Business System Group for all Developement Systems in the landscape
              1) INTEGRATION_SERVER_UKQ
              2) UC2_400
              3) UEQ_400
    We are unable to put the business systems in their respective groups
    All the Business systems are either being assigned in XI_QA or XI_DEV
    Please let us know if this is a product error in SLD 7.1, could not find any relevant notes
    Thanks,
    Govind
    Edited by: Govind Prathi on Feb 12, 2010 10:25 PM
    Edited by: Govind Prathi on Feb 12, 2010 10:27 PM

    We  have already  assinged the Integration server to their respective business system groups while creating the Business system groups.
       BSG: XI_DEV --> UKD_400( Integration Server DEV )
      BSG : XI_QA  ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
    As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
    But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
    Please help me understand if i am something in the configurations.
    Thanks
    Govind

  • RC 8 error while transporting the query from Dev to Qa - Element missing

    Hi All,
    I have made a multiprovider by copying one existing one.
    I have copies one of the Bex queries using RSZC from the source to Target MP.
    While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR) 
    Has anyone seen similar types before. Any inputs will be highly appreciated.
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)     
    Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM                                             
    Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M                                           
    End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06                                                                               
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)         
    End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14                  
    Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L                                     
    RS_AFTER_IMPORT belongs to package RS                                                               
    The errors affect the following components:                                                         
       BW-WHM (Warehouse Management)                                                                    
    Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045              
    Post-import methods of change/transport request BDAK959603 completed                                
         Start of subsequent processing ... 20110517070025                                              
         End of subsequent processing... 20110517070045                                            
    Kind regards,

    Hi Jith,
    First of all try to consolidate all your objects in a single TR and then move to Q from D.
    In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
    Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
    1. Go to your transport Logs and then to the entries marked as Error.
    2. There you will find the Query Element Ids, copy them
    3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
    Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

  • How to transport modified query from Dev to QA??

    Hi All,
    I have made a few changes to a query that has already been transported to QA from Dev. I have removed an Infoobject and introduced a new Infoobject and other such changes.
    Now I would like to transport the "new version" of the same query from Dev to QA again so that all the new changes are reflected in QA environment as well.
    What steps or procedures do I need to follow for this please?
    Thanks for your time,
    Regards,
    Reddy

    Reddy,
    BW reporting objects (query / Workbook / WAS tempalte) change transport system is different than other BW development objects (Infoobjects, cubes, transfer/update rules etc..).
    Before you start making changes to any Query objects (which are already transported before), first you need to assign the respective Request in the "Transport Connection" tab (click on the BEX with truck symbol icon) and assign your request with the package name.
    hope this helps a little..
    Good luck
    Mavi

  • Process chain transport in BI7.0 from DEV system to PROD system

    Hi experts,
    I have to create a process chain of master data loading, and i have created the process chain in DEV system, now i want the same in the production system, can you please suggest me which way i do
    1) create the same process chain in Production system directly or,
    2) should i transport the same process chain to production system, i created in the development system.
    and please tell me that what kind of problems in future i will face by following the above steps when the project will be in support state.
    thanks in advance for all your expertise experienced help.

    It is always advisable to transport the process  chain from DEV to Production. You can just do this by simply gather all the necessary objects for process chain into your transport.
    During the support phase, you have to monitor the data load through process chain. That can be done via transaction code rspcm. In case there is any error in the process chain ( various errors can be there, data loading error, delta error). In that case you have to go to the step of the process chain when the error occurs (it will be marked as red) , rectify the error and process the step manually at the point so that the following process finishes.
    Hope this is clear now.

Maybe you are looking for