I have tried all fixes posted so far and still I have no hardware installed!
Hi ...I have a 2008 dual core Imac 27" since upgrading to lion...I have had all the symptoms(dropped connections ..unstable airport) everyone else has and then after upgrading to 10.7.3 I now have lost my airport signal all together! I have tried everything everyone has posted and still when I tap the icon on the top of the screen it tells me "no hardware installed". What I did to escape this is ...erase a partition that was set up for bootcamp (which i never used) and then install the discs that came with the computer on that partition...then I upgraded to snow leopard (another disc I had) and when I restart in this partition everything is fine...I have my airport connection ..no drops ...speedy browser etc.....but when I go back to Lion it still has no airport.....I tried a suggestion someone made about delete wifi in network settings and then add again ..so i tried this and thank god I had two locations set up because under that location I can not add wifi...because it is not recognized means it it is not there hence the computer gives me no option to add it again.
I noticed there was an update that people were saying was a fix, but unfortunately it is only for 2009 imacs and up. Does anyone think they will address that this is also effecting models before 2009?
You would restart the computer while holding Command R, which should bring you to Lion Recovery, provided that it installed correctly when you installed Lion.
Lion Recovery has the wifi icon in the upper right corner; if it recognizes your Airport card, then Lion should use your Airport card just fine, and your OS may simply need to be reinstalled to resolve your issue. Lion Recovery can't reinstall Lion without Internet, so it will prompt you to connect to wifi or use Ethernet.
I would get a firewire external HDD for backing up with Time Machine.
For Lion Recovery, here are the step-by-step instructions:
1. restart holding Command R until you get a gray screen with an Apple and a spinning gear
2. choose english as the main language and click the arrow pointing to the right
3. in the top right corner of the Lion Recovery screen, click on the gray wifi icon and select your desired network, providing the password as necessary
At this point, if Lion Recovery sees your Airport card, it should allow you to connect to your network; if it doesn't see it, then you may need to use your original install discs that came with the computer to erase and install. Let's assume that wifi works in Lion Recovery. Then:
4. select "reinstall" and click "continue"
5. follow prompts to reinstall Lion on your Mac HD
If the issue persists when booted to Mac HD after reinstalling Lion, then erase/install:
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh27903.html
Similar Messages
-
Tried the fix from last contact and still does not look right.
I tried the fix that you recommended and that had no effect. The colors on some web sites are off to the point that I can not read the material since the colors are so dark or even one site came up with an all black background that I never had that before on that site. Some sites are scrambled so much that it shows the site as an outline looks when writing a paper. On Monzilla, when you click on; i.e., 'cut' the bar highlights but the writing on the bar becomes so faint that you can not make it out. I never had this problem until I allowed the latest version to load. I also shut down the computer but that had no effect. If I look for something and use Yahoo it comes up with writing over writing on some lines. So why did this occur?
That's consistent with trouble with the Segoe UI fonts on your system.
If you're using Windows XP or Windows Vista, try Vortical's technique from the following post:
Re: iTunes 10.1 Missing Text
But if you're using Windows 7, try itunesTRK's suggestion from the following post:
menu bar invisible -
I have one computer with Windows 7 and an older version of Firefox, not sure exactly which one. I have never had a problem with saving passwords on it. I now have a new computer with Windows 8.1 and the latest version of Firefox, installed 5.29.14, and it is only randomly saving passwords. All the sites I've tried are ones that permit this, and I was able to save them on Explorer. I've checked my settings and save password is enabled--it seems Firefox is being selective about what it will save passwords for. Is this something new or is there a way to change it so it the box will always pop up asking me to if I want to save a password? Thanks for any help!
I appreciate your help but I am not a very expert computer user. I have checked that I am permitting passwords to be saved and it does work on some sites. I don't know how to do the first two things you mentioned
"You can toggle the signon.overrideAutocomplete pref to true on the about:config page.
You can remove autocomplete=off with a bookmarklet to make Firefox store form data like names and passwords. "
I found a bookmarklet on the page above but I don't know how one applies them.
What baffles me is why I've never experienced this issue with Windows 7 and the version of Firefox I am using on it. It works just fine on the Aetna site and all the others I'm having this problem wit Do you think it may be a Windows 8.1 issue? Or something with the new version of Firefox? As I said, I've got Win7 and an older version of Firefox that I use with it. I'm reluctant to update to a newer version of Firefox on my old computer in case that is the problem.
Thanks very much for your help and any other suggestions are very much appreciated. -
I have reset winsock, I have disabled firwewall, virus program, - tried everything. Still no luck. Looks like many people are havoing the same problem. What IS the problem and how can it be fixed?
Antonio,
Show ... it worked ... you are the man! This hint of clicking the right mouse button on the prompt and run as Administrator was perfect.
Thank you very much -
My Adobe flash keeps crashing. Have tried all fixes.
My Adobe flash add on keeps crashing; I have done everything short of uninstalling Firefox. Please help.
Is this an "in plug-in" crash where you see a crash error inside a gray box in the page?
I know you said you have tried all fixes, but if you wouldn't mind ticking off the following just in case:
(1) If you have any recorders/downloaders that interact with Flash media make sure they are as up-to-date as possible, or disable them temporarily.
(2) Disable hardware acceleration in the Flash plugin. See this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable the Flash plugin's protected mode feature. This involves creating or editing a settings file. The following pages/posts provide different ways to do that:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078
Flash needs to completely unload from memory (restarting Firefox might help) before this would take effect.
Any improvement? -
When Imopen Fire Fox, I get google and Fire Fox's page. I have tried all fixes, no luck
When I open Fire fox I get 2 tabs. One is Google my Homepage and the other is Fire fox's page. I have tried all fixes under help and suggestions with no luck?
Also I want a new page to open in a Tab. I set it to and it defaults back to new window. Also tried all fixes? I have been using Fire fox since day1, I know it pretty well, never had a problem.
Thank You
DougThis is the reply I got from emailing Adobe.
Thank you for contacting Adobe Support. I am responding to you in refrence to your Web support request dated 13/05/2009 for assistence regarding the issue that video freezes in your computer in IE 8 and Firefox.I am extremely sorry for the inconveneince caused to you . I would have loved to assist you regarding this issue , however i will appreciate if you please register the Adobe product on our web site , WWW.ADOBE.com , which is neccessary for getting suppot. In any case you can always Browse our web site WWW.ADOBE.com for any type of product and support related information. Once you register the product do write us back issue .
Thanks and Regards
Deepak Adobe Support
Again, support people who have no idea how their system works, simply typing a stock answer. How do you register Flash, btw, since, oh, you cannot? -
I have a brand-new elitebook 2740p and the battery won't charge. I have tried all info found so far
I have a brand-new elitebook 2740p and the battery won't charge. I have tried all info found so far, including info provided on this forum. I also followed the instructions in the Other Problems forum of the Notebook. How can I get my battery to charge?
See also this thread [/questions/951097] for instructions.
For forum cross referencing purposes
* Crash Report for CrashID bp-277ee840-e3b2-4977-a7cd-683db2130225
** Crash Signature: TlsGetValue
** [@TlsGetValue]
**Related Bug 830531 REOPENED --- [Win8] crash in XPC_WN_Helper_NewResolve mainly with AMD Radeon HD 6290/6310/6320/7290/7310/7340 (Wrestler Asic) -
Can anyone help?
If you've tried all the posted solutions, then bring your phone into Apple for evaluation.
-
I plug my iphone 3gs into my laptop and it no longer syncs with my iTunes. I've tried all the trouble shooting methods and nothing works. My iPhone doesn't appear on iTunes or under "My Computer." Does anyone know how to fix this?
If AMDS is running, you are using a USB port directly on the computer and not a hub, you have disconnected other USB devices except keyboard and mouse, you have completely uninstalled and reinstalled iTunes as described in http://support.apple.com/kb/HT1925, You have tried cleaning the connector on the bottom of the phone, you have tried a different cable, you have installed the latest USB drivers for your computer, you have disabled your antivirus and firewall, you are running as an Administrator account and you have tried creating a new user on your computer and connected when logged in as that user then you have exhausted my knowledge. The only other thing to try is a different computer. If it isn't recognized on a different computer you have a hardware problem. Good luck!
-
inbuilt isight camera is detected in system profiler but no image is being detected only a black screen shows up. I have tried all of the troubleshooting instructions and it still wont work. The iMac im using is OS X 10.6 and was an ex-floor model
Hi,
I would try a Safe Boot first. (This will take longer than a normal Boot and you will need to Restart afterwards).
If it were an older OS I would also suggest going to System Preferences > Displays and making sure the display is set to Millions. (My MacBook Pro does not have this option in Snow Leopard so I did presume Snow Leopard does not have it).
With some laptops there have been some issues with the cable up the back of the screen pulling loose with regular and frequent use of the lid, but this will not apply to you based on your specs. (it does take time to appear and is also somewhat rare). However it seems enough contact with the camera can make it appear in System Profiler and power it on but not give a pic.
If a Safe Boot does not work I would also try a PRAM reset.
Shut down the computer.
Restart it holding down Apple/CMD (or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
This is actually "less" destructive in that it clears less memory items than Safe Boot but they are different enough to warrant trying.
Do you have an older version of iGlasses installed ?
The one for Leopard does not work for Snow Leopard.
Do you have Web Browser open ?
This may point to Google Video Chat Plug-in and Flash Conflict. It would be rare to allow another app to access the camera even if not displayiong a Pic.
(Chrome Installs the Plug-in as does the standalone download).
Knowing what "any application" exactly you are trying might help us pin it down.
Any additional downloaded apps that can use the camera ?
Do you happen to have something balck in front of the camera ?
8:20 PM Sunday; October 9, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Windows 7 PC. 64 bit. Have tried all suggested solutions on forum and community. Other ideas?
Conversion Log ends with "flattening 3gpp files, removing j2k files...An error was encountered in the sqlite database: unable to open database file
conversion log: Conversion Failed.Log says “unable to convert SQLite db” and then “Conversion failed”. This is before it does anything with specific images. The line right before the above is “gpp files flattened . . .” which I believe are sound files
: Cheri Mason
Unable to convert PSE11 catalogs to PSE13 Organizer. Windows 7 PC. 64 bit. Have tried all suggested solutions on forum and community. Other ideas?
created by nealeh in Photoshop Elements - View the full discussion
What does the log file say? - Photoshop Elements catalog conversion failure.
Cheers,
Neale
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6850794#6850794
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Multiple Errors, tried all fixes, nothing seems to work.
My phone was working perfectly and has been for the 2 months since I got it...
All the sudden I went to use it and there was a white screen with some kind of error that wouldn't do anything so I did the battery pop reset.
Now when it starts up it says Uncaught exception: java.lang.NullPointerException(looked it up, tried all fixes, none worked) and I also get the Application Registry.waitF or(**************) timeout and I had Module 'net_rim_pdap_resources' not found error.
None of my music will play and when I start it up it now goes to a screen that says Blackberry Device Platform and lists everything instead of showing any icons or the homescreen.
I did a wipe hoping that would work and it didn't so now i've run out of options, can anyone help me?
It sounded like a good idea at the time....You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I've purchased an album through the itunes store and every track plays except one which continually asks me to authorise my computer. I've tried all the steps suggested above but still no joy. Anyone have any ideas what i can do next? Thanks Paul
Sounds like you have a "damaged track" or "damaged file".
This worked for me today downloading Kendrick Lamar's new Album "good kid, m.A.A.d city".
My situation: I bought the album today for my Mac, MacBook Pro, iPad 2, and iPhone 4S devices.
Issue: One song (only on my MacBook Pro) would not play, instead display "
EX: left"
Solution: 1. Manually delete the song (giving you the error) permantly from the authorized computer.
2. Open iTunes, Click iTunes Store (left sidebar), and locate Quick Links and then click Purchased to proceed.
3. Click "Not On This Computer", find the song that wouldn't play, and re-download it again.
4. Check your Music Library for your song (Should download inside the associated album) and hit play.
EX: (Song I purchased that wouldn't play because of authorization, playing)
Enjoy! -
my phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?
Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue! -
i have a HP laptop, when i try to do certain things that require flash player it tells me i need to install the latest version so when i try it says its already installed. i have tried all the trouble shooting suggestions and it stll isnt working. I even checked the activex filtering and that doesn't seem to be the problem.
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.
Maybe you are looking for
-
Excel Import/Export in RulesManager ?
Hi , We do have Excel import/Export feature at Designtime. Do we have same feature at runtime in RulesManager also ? Regards, Anil
-
Please help me how to improve the performance of this query further.
Hi All, Please help me how to improve the performance of this query further. Thanks.
-
hi friends, may i get a extractor for Standard cost with material no and variance information plz help me.
-
Photoshop Elements 10: Problem opening .csf
Hi, I'm currently designing the cover for my highschool's yearbook and the company that's printing our books sent us an email with a .csf file telling me to do the following: "Before starting on your cover, please make sure you have loaded the "Joste
-
Changing default alert from None to 5 minutes before
Hello all, Is there any way to have all my new Calendar events have the Alert option default to alert 5 minutes before? Thank you so much for your time.