I have tried everything on your articles and still it will not let me save bookmarks.
I have tried upgrading and downgrading firefox and i have tried everything in the articles and still the browser does not let me save any bookmarks.
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Similar Messages
-
What steps do I take next. I have tried everything is this article.
Interesting ...
Your posting title mentions iPhone, but you seem to be talking about iPad.
Also, the article you attached references Macs ...
Anyway, here's a guide to setting up email for iPad:
http://www.apple.com/support/ipad/assistant/mail/ -
I've tried everything in this article and still can't send or receive email. I also contacted my provider and everything is working on their end. Does anyone have any suggestions?
Went to Apple Genius Bar. Info from them plus my provider resolved the issue
-
Since i updated my Iphone 4S to IoS5 i cannot open my contacts! i have tried to disable the Icloud and still they do not open! anyone have any further ideas for me to try?
Check the age of the files you wish to open.
Keynote 6 (the latest you downloaded) will opne Keynote 5 (KN09) files but nothing earlier. For that KN5 will act as an intermediate format (you save KN4 and earlier as KN5), then KN6 can open the resultanr files.
Make sure you have a backup of your original files, in case KN6 cannot replicate some of your earlier builds and transitions.
Les -
I just tried to update my iphone 4 to the 5.01. It said that my phone backed up and started update. i went on a run and came back and my phone is now stuck in recovery mode. It keeps saying that there is an unknown error, 1. I have tried everything on the troubleshooting list and cannot figure out what is wrong! Please HELP!!!
http://support.apple.com/kb/TS3694#error1
-
HT5538 I have tried everything to fix my IMessage but It will not work
Since 3 days ago my IMessage stopped working. I have tried everything to get my IMessage back up and running and am still not operational
Switch I message off
Switch FaceTime off
Reset network settings
Goto imessage - switch on
Goto FaceTime - switch on
iMessage problems iOS 7.1 - message fail, double message etc. -
I keep getting error message -42408 when I try to open ITunes Store.I sent a email to support and they sent me a link from Roy B,I tried both of his sugegstions and neither worked.Anyone have any other ideas????
Did you get anywhere with this, ikeaheerlen?
I am having the same sort problem (although my keyboard is recognized so I'm much further along than you).
I had a MacBook Pro with an XP SP3 partition and a Windows 7 partition on it.
I switched to a Mac Pro and wanted to migrate them over to it.
I used WinClone to make backups of both partitions and transferred the WinClone images to the Mac Pro.
I manually created the partitions and restored the WinClone images into each one.
But VMware wouldn't recognize either one.
So I deleted them both, and let Boot Camp Assistant (re-)create a single Boot Camp partition. Then I restored the Windows 7 WinClone image into it.
Ever since then all I get is "BOOTMGR is missing" error.
I thought maybe since I had dual-boot working (with a boot manager) in the old MacBook Pro setup, that the boot manager must've lived on the Windows XP SP3 partition, and it's completely missing from the Windows 7 partition. So I figured I needed to recreate it somehow.
After using the Windows 7 DVD ISO disc image to boot from, and trying several automated/manual steps, I can now actually get VMware to recognize the Boot Camp partition as being one, but when it tries to set it up for use with VMware, it complains that it isn't ready because it must have shut down incorrectly. It says to boot into Windows, then do a clean shutdown. But when I select the Boot Camp partition from Startup Disk, it boots from it but I still get the "BOOTMGR is missing" error even in a 'native' Boot Camp boot
I've tried all the steps I can find (including manual "bcdedit" steps booted from the Windows 7 DVD disc image) to no avail. I don't know what else to try at this point ... -
I have just updated to the Firefox 4 Beta and from having no problems at all with the previous version I can now no longer scroll. I have reloaded my touch pad drivers and also been onto "about:config" and altered various things suggested by 'firefox help' and still no luck. The scroll button on the touch pad does still work as I can still scroll in Thunderbird and any of the other programs that I use, just not with Firefox any longer. Any suggestions would be gratefully received. Many thanks.
Since today the scrolling started to work for me. Was there a fix auto installed? I havent updated anything that I know about.
I might have uninstall an old Java JRE, don't remember when I did it, could that have done it? -
About 70% of my bookmarks now contain no data -- they are blank icons that cannot be deleted. I have tried to type in the web address and save as a new bookmark, but it won't let me -- it just re-saves to the blank icon with no data
About 70% of my bookmarks now contain no data -- they are blank icons that cannot be deleted. I have tried to type in the web address and save as a new bookmark, but it won't let me -- it just re-saves to the blank icon with no data
-
Security question keep saying they are wrong and I know they are right. I can't change them cuz when I try it tells me to answer the questions. I have tried everything changing my account and all and still can't get it can some one please help me out.
Go here and select "Reset your password." You will receive an email message with a link that bypasses the questions. You will then be able to select and answer the questions again.
-
I have attempted to update my iPhone to ios8. My phone has gone into recovery mode. I have tried all of your recommendation and it will not come out of recovery mode. HELP!
Without knowing what you did and exactly what happened (error messages) all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!
Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
HT201412 I have tried all of the above and still can't get my ipad to respond
I have tried all of the above and still can't get my ipad to respond
Everything? Did you see the very last part about restoring the iPad and did you notice that there is another link in that step in case you cannot restore the iPad?
Symptoms
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of the symptoms listed below.
Resolution
If any of these symptoms occurs, follow the steps in this article to resolve the issue. The device:
Does not return to the Home screen after pressing the Home button
Does not wake from sleep after pressing the Sleep/Wake button
Does not turn on (or power on) when pressing any button
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
If a single application is not responding or freezes when it opens, you can force it to close
Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.
Instead of dragging the red slider, press and hold the Home button for six seconds.
If the device does not return to the Home screen, see the steps below to restart.
If the device is unresponsive or certain controls aren't working as expected, try restarting
To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off the device.
To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
If the device remains unresponsive or does not turn on (or power on), try resetting
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If there is no video, verify that the device has enough charge to turn on
If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Home button to attempt to wake the device.
If the screen displays a red battery icon, let the device to continue to charge until it turns on.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane.
If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
Additional Information
Ensuring that your iOS device is kept updated to the latest software should minimize the occurrence of these issues. -
I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??
And is there any way to sync all my purchases and accounts to just have one... It is a bit stupid that you dont even get a list of something of what account you may of used, or some kind of hint, so you could log on to the right account. I am really stuck ...
Please Advise......You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others. -
i have the ipod touch 4th generation and the screen is white, i was going to charge it and it turned white. I have tried to reset it but the apple logo will not show up and it will not turn on! i just got it for christmas... can you please help?
The way I did it was I got the free app sync:stream from the App Store and then added my ipod to my ps3's Bluetooth devices. Then went to audio settings and set output and input to 'Skaggs iPod' you then open the app and it will be listed under music as a media service. You then go to all tracks and click copy (press triangle) it will then begin to copy all of your songs onto your ps3 via Bluetooth. I haven't tried but I assume the same can be done with photos. I hope this was helpful reply if you have any questions :) good luck
Maybe you are looking for
-
In-Place Hold Query Based on Assigned Policy
Is it possible to create an "in-place hold" query that places a hold on all items matching an "assigned policy/personal tag?' If so, how do you do it? We have three possible assigned polices. If staff do not select a policy, their email is purged in
-
I have two accounts ant I want them together so I can have all my apps I have downloaded. Can someone explain how I switch over when in the app store. Thx
-
A popular problem; Can't install the new Creative Cloud Tool
Sorry to bore everbody to death with this but after mauling my way thru literally piles of bits of threads and so forth off google, the end result is lots of confusion. My situation: Running win 7 64 bit (uptodate) I've been running Creative cloud t
-
Aperture issues with video playback in slideshow
I'm trying to add a few videos into a slideshow but seem to be hitting an issue with playback. The mpeg4 files play perfectly fine in my project folder but when I drag it into my slideshow I only hear the audio of the video, no picture. Anyone know w
-
Time Machine - Yosemite Issues
I keep getting a message - "backup failed - There isn't enough space ..." In the past, TM would automatically delete the oldest backup. But I can't seem to make that happen w/ Yosemite. Anyone else experiencing this issue ?