I have tried removing and re-installing my itunes on my PC, but it just comes up with a message saying that the error: entry point not found. pleaseee help!
My itunes was working perfectly and then i upgraded and now it doesn't open and all i get is an error message.
Ive tried so many times removing and re-installing and it won't work.
Someone please help me!
I am a windows 8 user!
The most thorough explanation of what needs to be done is in the user tip: https://discussions.apple.com/docs/DOC-6562
Similar Messages
-
i have downloaded the trail version of CS6 and run that. it shows the error ' entry point not found"
Your computer does not meet the system requirements. Refer to the tech specs on the product page.
Mylenium -
i have an activation problem with my iphone 3gs. i updated the software to io6 using itunes but now the phone will not complete activation because it keeps saydin the activation server is not available and to re try later. ive been trying for 6 hours but it still wont activate. if i try using itunes then it sayd no sim inserted when there is one inserted, what can i do?
You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'
Please help...need to get newest update so I can activate my new IPhone4. ThanksThat suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
i have restored my iphone but it has been 2days saying that the activation server is not available. please help me.
That is almost always because the phone was hacked to illegally unlock it. Contact the carrier it's locked to and ask about having it legitimately unlocked. If they will not do so, you will not be able to activate that phone.
-
My ipjone keeps coming up with a message say that the cable or accessory urged in is not a reliable source for this iPhone but I do not have Nything plugged in to my iPhone. I Put it in a bowl of rice for 2 hours to see if that would help it but it hasn't. Is there anything thank can do???
Clean the connector on the bottom of the phone. Use a magnifying glass, bright light, and a wood or plastic toothpick. If you got the phone wet put it in a bag of uncooked rice for several days, not hours.
-
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
When I try to set up my time capsule it says that the PPPoE Server is not found... What does this mean and how do I fix it? Thanks !
You are using PPPoE but there is no server to authenticate against.. or the modem is already connected and nothing else can join.
Is this ADSL?
Do you have the modem in bridge?
How does it work with the modem working as router? ie what type of connection does your ISP supply.. eg PPPoE is only one.. PPPoA is another.. IPoA or ETHoA.. and sever other more specialised.. PPPoE can only work where it is supported. -
hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Each time I try to install it, I get an error message saying the software for the driver is not available.
The driver appears to be available on this page:
http://www.samsung.com/us/support/owners/product/SL-C410W/XAA -
iTunes has stopped working on my PC with latest updates.
Well, I guess I have to download some other software to make my apple product work. Really great stuff you guys sell. I will never buy another apple product. My Iphone, Ipod and Itunes are junk
-
As with the music, it just scrolls rapidly through my play list nut not playing any songs.....
I've had the same problems -- latest version of Mac OS and iTunes. Content plays on my iPhone, but I get the grey screen and message telling me to authorize. I even deauthorized the computer and reauthorized it to no avail.
And it is the right apple account. -
In-app purchases not working please help
If you are getting a message to contact iTunes support then you can do so via this page and ask them for help (on thses forume we won't know why it's appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
Just installed LV 5.1 on customers PC. She already has LV 6.1, and 7.1 installed. Upon reboot, at login screen, the error message below occurs:
"nimax.exe-entry point not found"
"The procedure entry point?GetVirtualChannelObjectOnServer@CNIConfigData@@QAEKPBD0@Z could not be located in the dynamic link library nidaqcfg.dll."
I have tried installing the latest version of MAX. No luck. Any help would be appreciated.
Mark
Attachments:
Ann's.doc 30 KBHi Marxs,
My first suggestion would be to avoid installing LabVIEW 5.1 if possible. This for a few reasons...
LabVIEW 5.1 has the option to install DAQ with LabVIEW. If you elected to install NI-DAQ with the LV 5.1 install, you will run into driver conflict problems.
If you want to use DAQms with LabVIEW 7.1, you will need to install NI-DAQ 7.1, 7.2 or 7.3. You can also use NI-DAQ 7.3 with LabVIEW 6.1. However, NI-DAQ 7.3 will NOT install support for LabVIEW 5.1. This means that you will not be able to use your DAQ devices in LV 5.1.
If you need DAQ for LV 5.1, you will need to go back to NI-DAQ 6.9.3. This version will work with 5.1 and 6.1, but you will loose functionality in LabVIEW 7.1.
My suggestions would be as follows:
-- uninstall LabVIEW 5.1 and all versions of DAQ that are on the machine
-- re-install LabVIEW 5.1 but choose the "custom" and elect NOT to install DAQ
-- Install NI-DAQ 7.3 and have support for 7.1 and 6.1 (no support for 5.1 is available)
Basically, when you try to mix these very old versions of LabVIEW and DAQ with the newer stuff you will run into driver conflicts that can be unpredictable.
Maybe you are looking for
-
Hi EXPERTS, In notification when we change user status, system logs date and time in action log I want to know in which table does user status date and time can be found. Regards Anil Kumar
-
How do I take images from DVD's?
How do I take single images from a home movie DVD?
-
Hello Forum members, I have a table: quarter,config q1-2006 10 q4-2007 50 q2-2006 30 I want to replace config for other quarters based on current quarter ie i want 10,30 to be replaced by 50. SQL> select 'Q' || TO_CHAR( sysdate, 'Q') || '-' || TO_CHA
-
SUBMIT RBDMON00 (bd87)
SUBMIT for report RBDMON00 (bd87) SUBMIT... [VIA SELECTION-SCREEN] it is not setting value for the field Partner system SX_PRPRN and Message type SX_MESTY. any idea plz help Thanks & reared Diwakar Chaube Edited by: diwakar chaube on Sep 26, 2008 9:1
-
Error facing while exporting in Receivables in Oracle Apps
Hi, I could not figure out that whil exporting in Oracle Apps in Receivables Module I am getting Error : The following message recurs with the same 'A3 UIP Status' in error. I cant get past this message. Value 1 for the flexfield segment A3 UIP Statu