I have tried to change my cd visa number and it doesn't work. Advices ?
Well I am ****** ! I have done what my phone ask and still it doesn't work. I must say this is a first but then I have never had to update my credit card info before either.
I want to buy something (new effects for a pic app) and then I have to update my credit card number etc... But *** ? iTunes doesn't accept it. It says I have to contact you. The red is expiration date and year which I fully typed 3 times already without any changes.
Did I mention I was ****** ? Yes I think I did but this really ***** apple, your products are already too expensive for what they are worth but we can't buy effects ? This is really a bad idea. You will get high not good image for such a small problem
you are not speaking to Apple, this forum is made up of users like you. You need to contact Apple directley via iTunes support: https://expresslane.apple.com/Issues.action. Also, lay off the offensive language, that will get you nowhere with any customer service.
Similar Messages
-
Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)
Hey lozza567,
Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Issues with sending and receiving MMS
You will need these to send and receive MMS:
- An iPhone 3G or later.
- iOS 3.1 or later.
- A cellular data connection. MMS isn't available if you are using only Wi-Fi.
- A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
- A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
To resolve issues with sending and receiving MMS, follow these steps first
1. Go to Settings and turn airplane mode off.
2. Go to Settings > Messages and turn MMS Messaging on.
3. Go to Settings > Cellular and turn Cellular Data on.
4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
9. Restart your iPhone.
10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
11. Reseat your SIM card.
If you are still unable to send or receive MMS, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
7. Back up and restore your iPhone as new.
8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
Thanks,
Matt M. -
On Calendar, I have tried to change the "Day starts at" and "Day ends at" many times however, it just does not seem to change. Please help.
This for Calendar on my Mac which of course effects my iPhone and iPad.
I don't need to see the hours from 1 am to 6 am
Please help!Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do. -
I did step 2 in the "iDVD: Setting Encoding preferences" but my computer isn't giving me the pop-up in step 3 so i can't push an OK button in regards to the message. I waited 15+ hours for it to burn and it sent me to this page. I have tried to change the encoding settings again, and it adjusts the capacity but no message pop-up appears.
You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
(1) Page Info > Permissions tab
While viewing a page on the site:
* right-click and choose View Page Info > Permissions
* Alt+t (open the classic Tools menu) > Page Info > Permissions
(2) about:permissions
In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
Any luck? -
In my dock there was this weird program called "tutorial". While throwing away this program I had to fill in my password. Afterwards I tried to change my password, but my old password doesn't work anymore. Who can help?
What was this program for, or did you just assume it's something you shouldn't have and therefore arbitrarily decide to "throw it away"? Exactly how did you supposedly throw it away?
If you didn't change your administrator password, there's no reason it shouldn't work now, so that suggests you did something else, or changed it and then forgot what it was.
You can't recover that password; you can only change it. To do that, you would need to boot from your Snow Leopard DVD, choose your language, then choose Reset Password from the Utilities menu in the top menu bar. -
I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.
The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac. It will appear in "Finder", which is in your Dock.
Hope this helps -
how do i get a password? I changed my password last night and it doesn't work. Or, it is asking for a password for something else and I do not know which one!
Usually when someone mentions "passowrd" in a posting it will not be related to an Adobe product but to the machine that you are trying to implement some installation or update for. If you explain more about what you are trying to do and describe what you encounter it might be easier to determine what you are dealing with... include a screenshot to help explain as well if you can.
-
I am trying to "personalize" my cs2 software online download with the serial number from my original boxed cd set and it didn't work. I tried using the download serial number and that doesn't work either. Need help!
I understand that you have also used the download link & serial number from Adobe - CS2 Downloads, if still the CS2 is not working, then please refer to the system requirement for e.g System requirements | Photoshop
The issue can be that the present operating system might not be compatible with the CS2.
Regards
Rajshree -
I am trying to use livetype with persian alphabet and it doesn't work. what should I do?
I am trying to use livetype with persian alphabet and it doesn't work. what should I do?
There is no more LiveType with Motion 5. You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.
-
How do I remove or delete files and image files within a document foler? I have tried dragging the files to the trash, but that is not working.
Right-click (or ctrl-click) on a file. If the "move to Trash" option is greyed out, select "get info" and read the permissions at the bottom of the info window.
Wat are they?
Do the same for the enclosing folder - what permissions does that have? -
I have a MacBook Pro running Yosemite.I did not shut down the computer last night. When I opened the computer this morning Dashboard in overlay was on the screen. I have not been able to get out of dashboard. I have tried esc, F12, and accessing System Preferences in the Dock. I clicked on Mission control and nothing changed. Help be get back to my desktop.
Did you try restarting the computer?
Delete com.apple.dashboard.plist file.
Quit all applications.
Option click the "Go" menu in the Finder menu bar.
Select "Library" from the drop down.
Library > Preferences > com.apple.dashboard.plist
Right click on it and select "Move it to Trash".
Restart.
If this doesn’t help, Put back the com.apple.dashboard.plist
Right click the Trash icon in the Dock and select “Open”.
Right click the com.apple.dashboard.plist and select “Put Back”. -
I cannot work out how to attach a photo as an attachment to an email. I have tried several times today using different methods (ie, changing the email to plain text, dragging the photo from Iphoto over the mail icon, emailing directly from Iphoto), but none of them work. Everything seems to just produce an email with an embedded photo. Any ideas?
Is this the first time your friend receives e-mail from a Mac user?
It is certainly the first time I have sent her emails from a Mac. Not sure if she has ever received messages from another Mac user before.
You've sent her e-mails with pictures before, but only now you're having a problem
Yes, that's correct.
Mail.app offers two settings you can try to manipulate: Edit > Attachments > Always send Windows-friendly attachments, and, Always insert attachments at end of message
I had already tried that and it didn't work.
e-mail client your friend is using
I will find out on Monday when she goes back to work, but I wanted to look at solving the problem firstly from my end.
very likely you're dealing with a problem others have dealt with
Yes, very likely - I searched the site before I posted my own question, and there were quite a number of posts on the same issue.
Again, thanks everyone for your help. Hopefully we can find a solution. I am not making you all grope in the dark just to annoy you!!! I'm just a new Mac user trying to work something out. I am sorry if it seemed otherwise. -
Firefox opens up with an "unable to connect" message; it also says it cannot establish a connection to the server with these three bullets: 1) The site could be temporarily unavailable or too busy. Try again in a few moments.
2) If you are unable to load any pages, check your computer's network connection.
3) If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
I have tried to do all of the tips that you have on your website for troubleshooting and nothing seems to work. I know it is not my Internet connection because my roommates can get on Firefox without a problem and my Internet Explorer opens just fine.
== This happened ==
Every time Firefox opened
== I wanted to do homework last night. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; Tablet PC 2.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618; AskTbARS/5.8.0.12304)Ccote15-
If your iPad is defective and is still under warranty, you can take it to an Apple Authorized Repair Center and get it fixed. If you are worried about a defective replacement, then a repair may be a better way to go. <Apple Authorized Repair Centers>
Personally, I would prefer getting a replacement. You read about many defects here in this forum, but they only represent a tiny percentage of all iPads sold.
Fred -
I've done everything suggested twice, deauthorised, reauthorised, uninstalled, reinstalled, and nothing. This is my first purchase on iTunes, and I am not impressed. Anyone know how to fix this? Can I at least burn the music off onto a CD and listen to it that way?
Explicit versions will have 'explicit' (or a red 'E') against them in the store, if it's not labelled then it will be clean.
Purchases are considered final but you can try 'report a problem' page to contact iTunes Support and see if they will credit or refund you so that you can buy the explicit version : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
ICloud ask you to change password you do it and it doesn't work!!!
Log into iCloud on my Mac book it asks me to change password. i change it and save it. and it still doesn't work. Neither does it work on my iPhone. ow my iMessages or mail works.
Maybe its time for a change of brand !!!Logged into iCloud via my mac book pro. it asked me to change my password. A added a sign a sign from previous password. I have subsequently tired in vain to reset password via alternative email account but noting is working.
Maybe you are looking for
-
Hello I am having trouble exporting through Quicktime conversion in Final Cut Pro 5. I am currently using a high end system using a Kona LHe capture card working on uncompressed 8-bit SD footage. This captures fine and plays from the timeline in the
-
Payment block to set in background
Hi all, I need to set the payment block (BSEG-ZLSPR) in a background task of a custom workflow, so I developed a custom method in BUS2081. It works when I run it via SWO1, but not through the background task. I know it could be a problem of COMMIT WO
-
Hi, In preparation for Unicode upgrade, all of our HR programs have been upgraded and 'Unicode Checks Active' attribute turned on. In doing so, we made the following code change for "carriage return/line-feed" functionality in several programs. FROM
-
All Browsers hang when submitting web form
Hi All, This is something that has really started to annoy me now and its effecting me on osx 10.5 - 10.7. On different machines and most strangly on different web brosers (safari, firefox etc)... However I do not have these problems if i load up win
-
How do I delete Add Security Exceptions popup box
I changed the port for my gmail account which I read in Thunderbird in error and now get the popup Add Security Exception which states "You are about to override how Thunderbird identifies this site. I don't want to override this! just get rid of pop