I have tried to install Adobe flashplayer several times and I can't get to my project on shutterfly
I have tried to install Adobe flashplayer several times and I still can't get to my project on shutterfly, it keeps telling me I have to install Adobe. What am I doing wrong?
http://forums.adobe.com/thread/1195540
Similar Messages
-
I bought a second license and I can't find the serial number, I have tried to contact adobe like 4 times and got no luck. Any help on where to find it? is it the same serial as the first copy we have?
Hello,
This order no is for subscription of Adobe Captivate 8. In order to install subscription you need not to enter any serial key .During the installation it will prompt you to enter your Adobe Id and it will validate your subscription after validating your Adobe Id from the server. I mean you have to sign in with your Adobe Id during the installation which you have used at the time of purchasing the subscription.
So for installation and activation you dont need any serial key . Just sign in and it will automatically activate your subscription .
For more information on subscription please click on the link below.
http://www.adobe.com/in/products/captivate/faq.html#subscription
Regards,
Rajeev. -
My kid down loaded mackeeper and now I can not get rid of it. I have tried all techniques suggesting on several sites and still can not empty the trash can. keep getting error code -8003. Help.
http://reviews.cnet.com/8301-13727_7-20020873-263.html
This should help you empty what's currently in the trash, but is no guarantee you got everything related to MacKiller off the drive. See Ogelthorpe's link. -
I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem... -
When I go to use Photo Both, Facetime, I get "There is no connected Camera". I have a built in camera but don't know how to fix it. I have tried rebooting in three steps several times. First time it worked, but everytime I log back in, I get the message again and now the reboot does not bring the camera back. Any suggestions on what I'm doing wrong or should do to fix it?
Hey junae
Check out the article below to give some other options other than what you have tried so far.
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
after i updated my iphone 5s to iOS 8.3 , i downloaded a game that took all the storage away . the problem is that , when it delete the game , the storage doesn't expand, it sticks to 0 bytes. i tried to delete more apps , the problems still persists. once i go to gallery , and try to delete a picture or video , the gallery app crashes instantly. i tried to fix the problem by restarting the phone several times , and it doesn't seem to fix the problem. i need a solution to my problem , and if anyone can help , i would be grateful. i can't take pictures or save up anything anymore , and can't seem to check up on my msgs that i receive. Thank you.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]] -
I have tried to install Adobe Flashplayer update.
During the download and install it crashes in IE, Chrome and Firefox. I have the lastes of all of those. I get a message that the Webpage has caused this proble. I have Windows 7.
uninstall your current flash player, http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
then manually download and install fp:
Flash Player for ActiveX (Internet Explorer): http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe
Flash Player Plug-in (All other browsers): http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe
Flash Player (Mac OS X): http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg -
Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.
test to see if it's installed, Flash Player Help
-
Hello I use a macbook pro with OSX 10.9.5. I am trying to download Flash player but keep getting this message "Install Adobe Flashplayer" is damaged and can't be opened.You should eject the disk image.Any ideas please?
You should make sure you do a complete uninstall of the flash player first and then install the latest FP14 version from this link - Use http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g
In order to do a complete uninstall - Uninstall Flash Player | Mac OS -
I have spent hours trying to install Adobe Flash on Firefox and it won't work.
I have spent hours trying to install Adobe Flash on Firefox and it won't work.
Seems a common problem.
What OS are you using, Windows 8 64 bit or something? Win 8 has an embedded Flash Player on it, and I have been told here that if this is the case, installing a new version of Flash Player is not necessary, but Fire Fox needs the plug in. They came out with a Flash Player plug in for use with Fire Fox that includes a debugger, but I have not tried it yet. (see below).
I have tried installing Flash Player 11.8.800.994 and 11.7.70.224...... and all crash. I think maybe some anti virus software needs to be disabled to allow installation, or the anti virus thinks its malware. I am also not sure if I need to also install Shockwave Flash for the whole thing to work?
Not sure the following will help and I am about to try it because I am going round in circles, too.
If 11.7 extended support release works for you, would you please update your success by adding a reply at the bottom of your original post, and let us know what you did that worked?
Good luck!
Announcement: Attention: Please read for important changes to Flash Player 10.3
Hide Details
Beginning July 9th, 2013 we will be updating the version of our "extended support release" from Flash Player 10.3 to Flash Player 11.7 for Mac and Windows. To continue to stay current with all available security updates you will need to install the 11.7 extended support release or update to the most recent available release (11.8, etc.) For full details, please see this blog post:
Extended Support Release Updated to Flash Player 11.7
by Chris Campbell (May 21, 2013) -
Brand new computer - Windows 7 - Browser Mozilla Firefox - Trying to install Adobe Flashplayer - after initial box appears, I click 'save' and nothing happens - McAffee Anti virus already installed - how do proceed?
Try using these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers) -
I have been trying to download adobe reader several times I have tried to click run and save the adobe reader installer box pops up with a blank black screen. I have browser IE 11
Try using the offline installer from http://get.adobe.com/reader/enterprise/
[topic moved to Adobe Reader forum] -
I have downloaded 10.5.8 combo several times and cannot get it to install because the disc won't mount or the installation gets hung up after restart. My current os is 10.5.1, and I am trying to upgrade to snow leopard. This is on a dual core macbook pro.
You don't need to update to Leopard 10.5.8 unless you want to keep Leopard. Upgrading to Snow Leopard requires that your purchase the retail install disk.
The following covers Leopard:
Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).
Solutions for troubleshooting installation, startup, and login issues in Mac OS X v10.5
http://support.apple.com/kb/TS1541?viewlocale=en_US -
I am trying to install Adobe Creative Suite CS2 and I am at the last stage of installation but the pop up window is asking that I insert CD #2 but, of course, there is no cd! I tried clicking okay and double clicking the image for CD #2 or file #2 but nothing works - Help!
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones) -
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
Maybe you are looking for
-
What a horrible way to treat customers. I was due for updates on my phones and thought I should maybe check some other prices but have been with Verizon for 20 yrs so ended up there. I got 2 new IPhones 5s and the wife couldn’t decide what she wanted
-
So here's an interesting one... I have just updated iOS on my iPhone and it came up with the activation prompt. I entered my iCloud email and password and it told me that my account was disabled for security purposes. This happens quite regularly as
-
Encrypted Alert (21) - Windows 7 client web page login falure
Hello community, I have a challenge for you. This is a very odd issue I am having. Let me outline my basic environment. I have a Windows 2003 Server which serves as the DHCP with a (2-day lease), Windows 7 Clients (fully patched) running IE 11 (ful
-
I had to erase and install to upgrade from 10.4 to 10.5. I got it to work, but now I lost iLife. How can I get it back? iLife was already installed when I got my iMac, so I don't have the disk.
-
My email comes as attachments now instead of just html
I was using firefox 9.0 than all of a sudden my email comes as attachments and not html. I use windows live email. I wiped out firefox, got firefox 10.0 and still having the same problem.