I have tried to install OS X Mountain Lion on a Mac book 2009 and when it gets to showing fully installed it seems to freeze and go into minus time of installation.can anyone help?
I have tried to install OS X Mountain Lion on a Macbook 2009 and it has gone past its install time into the minus time.do this twice it wont install
Help
Thanks Guys
Negative numbers on the installation progress bar can happen. Just let the installer end.
Those negative numbers do not mean something is really going wrong.
Similar Messages
-
Backed Up Iphone to itunes and when restoring its looking for a password to restore! None requested or set at original backup. Can anyone help?
I have not restored device so have all my data on it still. Am not pluggin it in for first time, did this originally when setting up phone. I have an option to restore to original backup as well as 'set up as new'. What happens if I chose the 'restore from backup' option.' how do I go about backing it up first - if i right click 'iphone'' option on left hand side under devices the only option is'eject' or 'restore'. I'm not sure that my iphone is being recognised by itunes - should it not give the name of my iphone under devices?
-
I downloaded Mountain Lion on my Mac Book Pro but when I go to install it, it says "OS X cannot be installed on Lion." Any advice?
Right-Click the "Install OS X Mountain Lion" installer under /Applications and select Show Package Contents and drill down through the folders; Contents/SharedSupport. Drag the InstallESD.dmg file to your desktop. Grab an 8GB USB stick as the file is 4.35GB's and might not fit on a 4GB USB stick. Then mount the DMG by double-clicking it and stick your 8GB USB stick in and that will mount then you can use Disk Utility to restore the DMG to the 8GB USB stick. Then shutdown and reboot while holding the Option key and select the USB drive. See if that will let you install Mountain Lion.
One more thing, you have to format the USB Stick first and ensure it's set to GUID mode (under Partition tab Options button) or it won't boot.
More detailed instructions:
http://osxdaily.com/2012/02/17/make-bootable-os-x-10-8-mountain-lion-usb-install -drive/ -
I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help
iOS: Unable to update or restore
Read the article Put it in recovery mode -
I can't update my itunes to the latest version. When I try this manually it tells me the URL cannot be found. I am confused. Can anyone help ? I am running windowsxp.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
I need to export a photo at around 1meg file size,and dont seem to be able to do it in the presets can anyone help please ,I shoot on a canon 5d
I believe Frank is referring to the end use (e.g., for print or on-screen use).
Until he returns, I can tell you that I ran a quick test using an image from the Aperture 3 training book library which was as follows:
Camera = Canon EOS 5D Mark II
Master resolution = 5616 x 3744 (21 MP)
I was able to export to a JPEG with end file size of 1 MB as follows:
Export Presets drop-down > select 'Edit' option
Selected preset name 'JPEG - 50% of Original Size' > change percentage value to 40% > change DPI value to '300' > click OK to set as current default > Export version to desktop.
The exported JPEG has a resolution of 2246 x 1498 and appears on screen to have the same image quality of the original in Aperture.
Note - I did not change the default Image Quality slider in the Export Preset dialog (which left it at 10).
Basically, you will need to play around with the settings until you find the appropriate values to arrive at an image version you want. -
i have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page to get back to previous page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in finder
Hi..
I repled to you here > https://discussions.apple.com/message/25598596#25598596
Please do not start duplicate topics. It makes it that much harder to assist you. -
my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?
This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get. -
I'm new to iPhone and iCloud... I have lots of pics on my iPhone but only some appear on my iPad, they're in Camera Roll on the phone but random ones only have come into Photos on the iPad - can anyone help? Thanks!
Welcome to the Apple Community.
Photostream when enabled will only add photos from the camera roll that were taken post photostream activation. (Photostream does not currently share video)
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream. -
when i plug my iPhone 4gs to my macbook pro, it doesn't sync and this msg appearThe iPhone “iPhone de anthony” could not be synced because the sync session failed to start. can anyone help me
Same thing for me right now. Anybody have a fix on a Mac? My iPad syncs OK but my iphone 4S has this message.
-
i am trying to download some apps onto my iphone 3gs and it keeps saying i need to update it for this but ive trying and there is no update option on the phone or through itunes, it keeps saying its up to date, can anyone help please?
Would this matter then? can you not update the 3g to the lastest software?
-
When linking the icloud 3.0 software to my 2010 outlook an unepexted error message pops up. Can anyone help?
Not sure if you are trying to upgrade iCloud storage to make more room for the upgrade, but that won't help you. If you do not have enough room on your device for the upgrade, then you have to delete some things off of your device. You can also try to do the upgrade via iTunes on the computer you sync with. A direct upgrade does not require as much memory as a Wifi upgrade.
Upgrading iCloud storage only provides more storage for your backups and for your iCloud sync'd items like messages, contacts, etc.
Until the iCloud Drive is fully functional, iCloud will not help you to increase the memory capacity of your device.
And, right now, the iCloud servers may just be overloaded with activity.
Cheers,
GB -
When I open my mail account I keep getting the message "Checking for Mail". I deleted the yahoo account and set it up again and I am still getting the same issue plus I am not seeing any of my mail or folders. Can anyone help?
This is how I fixed it on my new iPhone 5S. Using the standard yahoo setting on my phone.
You will have to access "managing your app passwords" on your account profile for yahoo. Generate password for your app. For example: "My iPhone 5S'
Go to your Iphone and set up your yahoo mail account on your phone the normal way and you have to use the generated password. instead of the yahoo account password.
source:
http://virtualizeme.net/iphone-5-yahoo-mail-server-unavailable-fix/
I hope this helps,
cheers -
I plugged my iPhone 4 into my computer with the USB charger cable, and the screen went blank and came up with a picture of the usb cable with an arrow pointing to iTunes....Can anyone help get this fixed????
Connect your iPhone to iTunes and restore or follow the prompts.
-
i have an iphone 3gs and everytime i try to restore it on itunes it just keeps saying an unknown erroe has occured (29) can anyone help me with this??
Hello Laura,
Thank you for posting in the Apple Support Communities. I found an article that has information about Error 29:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Best,
Sheila M.
Maybe you are looking for
-
Hello BI Gurus, I have a BI report where we require to have values in the following format.. For Plant: X OVERALL Sep-07 Oct-07 Nov-07 Dec-07 Jan-08 Feb-08 Total No of Machines 1
-
How to change the font in the code view
I want change the font size and style that shows when I'm in code view. For the life of me, I can't find where to do this. Can someone help me?
-
Data element for mm.yyyy
Hello Experts, Is there any data element for a field with the format mm.yyyy . I need to place this field in the selection screen and i want to have an F4 help too. It will be better if i am provided with the database table name too. Please help. Us
-
Move Picasa photos to Time Capsule
How do I move my photos that we use Picasa with to my Time Capsule so I can use th TC as a media server?
-
To View Report based on Profit Center
Hi I will require Transcation Code to view the report based on Profit center, presently we are using KE5Z T_Code but that report doen't conatin the line items which was derived the data from 1st line item For Ex: Expenses Dr To, Expenses