I have tried to reset iPod. The apple logo is visable but won't go any further
I have tried to reset mt pod after fully charging it. The Apple logo appears but then nothing else happens
T
There's a support page for you.
http://support.apple.com/kb/TS1399?viewlocale=en_US
Basically you put the iPod in Diskmode by
1. Resetting (Press the Menu and Center Button for 10 secs)
2. When the Apple Logo comes ON, press Center and Pause Button for 6 secs till the Disk mode screen comes ON.
3. Connect to your iTunes, and Restore to factory settings, if it prompts you. ( be patient for 5 minutes)
if it does not comes On iTunes or on your Desktop, check your Cable or change the USB port to USB 2 port Windows Desktop has these port at the back. don't use the front USB port.
If you using Laptop, read the Manual to see which port are USB 2.0, some older laptop, has only one USB 2.0 port, so that may cause sync failure.
Similar Messages
-
I am trying to connect my ipod classic to a tv (sony bravia 1080p) and have tried many cables including the Apple composite AV cable with the 30 pin connector on one end and three RCA connectors on the other. Audio works but video does not. The ipod classic screen says to connect to device when it is already connected. No success. Any thoughts?
Hello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H. -
PLEASE HELP!! My mom is gonna kill me.. Tried recovering(restoring) with other pc's aswell but itunes does not show any message or any error (nothing)...Only the windows gives the message (Unknown Device) error 43.
Jailbreaking may or may not be legal, but either way it voids your warranty and cannot be discussed in an Apple hosted forum. When you jailbreak a phone you are giving up all Apple support. You are on your own, and will have to use non-Apple resources to resolve the problem.
-
i have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens. It will work in my docking station but as soon as i take it out it will not respond. any ideas, do i need a new battery?
It definitely sounds like your Nano needs a new battery at this point. You can have Apple replace it for a flat fee, send it into a third party service center to be replaced for much less, or you can purchase a new battery online and swap it out yourself if you feel up to it.
B-rock -
My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
Mac and iPad connect to wifi, iPhone will not. I have tried all resets besides the "erase all contents and settings" and nothing seems to work. Any suggestions?
http://support.apple.com/kb/HT1414
I would honestly try this. It is how to restore your phone and see if it works. -
Hello,
I need help! My itunes will not open in Windows Vista. I have tried everything suggested by the apple website. Even when I open itunes in safe mode, it still will not allow me to continue. I am assuming when it says something about Plug-ins that has something to do with the problem. Can anyone help me?Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items. -
My iPod itouch when plugged into computer just flashes the apple logo otherwise it just won't start. Try to reset -nothing.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
when i turn my macbook pro on , the apple logo shows up, but it is just loading. I have tried to turn if off , but the same problem appears. Someone know what the problem is?
Boot into Safe Mode
A Safe Mode boot can take a few minutes compared to a normal boot.
Once you are in Safe Mode open System Preferences > Accounts > Login Items
If you have anything listed there to launch when you startup your Mac, delete all items.
Then go to the Apple menu / Restart.
You can also use Safe Mode to do a "live verification" of the startup disk in case it needs repairing.
Help here > Using Disk Utility to verify or repair disks -
Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.
-
I tried to restart my iPad due to problems with a Pinterest app that took up a lot of storage in the cache...now the apple logo comes up but will not start...it has recently been charged
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Cheers, Tom -
I have a white screen with the apple logo upon startup. Then the wheel turns and the screen is white. Can't get past it.
Boot with your install disc, launch Disk Utility, and repair the boot volume.
-
My Mac book air opens to m the password but won't go any further, it stop right there! what should i do? I am sure i have the right password
Here's an old fix for the problem. Don't know it applies now:
Clearing Caches to Fix Login Problem
You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
Be careful. Some of these commands are dangerous, since you are going to be root.
Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
/sbin/fsck -fy
Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
/sbin/mount -uw /
cd /Library/Preferences
rm com.apple.loginwindow.plist
rm com.apple.windowserver.plist
cd /Library/Caches
rm -r *
cd /System/Library
cd /System/Library/Caches
rm -r *
reboot
Press RETURN after each command.
This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
If it isn't applicable in your version of OS X, then I suggest:
Be sure you backup your files to an external drive or second internal drive because the following
procedure will remove everything from the hard drive.
Reinstall Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
I"m restoring my ipad 2 but my ipad won't respond what shall i do. only the apple logo is seen but wont respond to restoring. please do help me email at [email protected]
FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
I have accepted iCal invitations with repeating events and they have since been deleted from the iCal on my Mac but won't delete from my iPhone. Help
I experienced this issue as well.
Background:
I had opened an ICS attachment for a repeating event on my iPhone, which added the item to my phone's calendar. I did not have the option to delete the calendar entry from my phone, and the item did not appear on the calendar on my Mac. My phone is currently running iOS 7 (but the problem began quite awhile ago; I don't recall which version of iOS was installed when it started).
Solution (summary):
Create a new calendar, move the items that you wish to delete to the new calendar, then delete the new calendar
Solution (detailed steps):
Create a new calendar
On your phone, open the calendar app
Tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Scroll to the bottom of the list and tap the "Add Calendar..." option
Give your new calendar a good name, such as "Delete me"
Tap "Done" in the top right corner to save the new calendar
Tap "Done" in the top left corner to finish editing the list of calendars
Tap "Done" to exit the list of calendars
Assign all calendar entries that you wish to delete to the calendar you created in step 1
Tap a calendar entry that you wish to delete
Tap the "Edit" button in the top right corner
Scroll down until you see the Calendar field (on an iPhone or iPod it's usually just below the bottom of the screen), then tap the Calendar field to bring up the list of available calendars
Tap the name of the calendar that you created in step 1 (e.g. "Delete me"); the screen should return to the main calendar entry page
Tap "Done" in the top right corner of the screen. You may need to then tap the "< Day" button on the top left of the screen to return to the main calendar view
Repeat the instructions in step 2 for each of the calendar entries that you wish to delete
Delete the calendar that you created in step 2 (this will delete all calendar entries assigned to this calendar)
From the main screen in the calendar app, tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Tap the entry for the calendar that you created in step 2 (e.g. "Delete me")
Scroll to the bottom of the scren and tap the "Delete Calendar" option. You should be prompted with a warning that explains that "All events associated with this calendar will also be deleted."
If you're sure that the only items on this calendar are items that you wish to delete, tap the "Delete Calendar" button
Tap "Done" in the top right corner to exit the Edit Calendars screen
Tap "Done" to exit the list of calendars. You should now be back at the main view of the calendars app
Rejoice, your pesky repeating calendar events have been deleted
At this point all of the items that you assigned to the deleted calendar should be gone
Repeat the steps above for any entries that you missed
Post another message to this thread if this did not resolve your problem
minor edit for clarity made by ScottHooley
Maybe you are looking for
-
How to set up 2 iphones on a pc with one using mobileme
Hi My wife already has a ipod so we have itunes already set up on the home PC and her work pc. We are about to activate two new iphones. I use the home pc primarily and have myoutlook running on it. Wife uses her outlook on work pc 2 iphones purchase
-
Upgrade from iPhone 4 to 5s (both 16G) 'other' file now exceeds capacity
When I traded in my iPhone 4 in for the 5s (both 16G), I went from having about 40% open space to not being able to fit in my 700 iTunes library on the 5s. Nothing was added but the 'other' indicator is now way bigger and filling up most of the capa
-
How to create an Average Image from Gray Scale (8 bits) JPEG Images
I�m trying to create a mean image from 9 JPEG Images, but this mean image has lots of "noise", is distorced, and doesnt�resemble at all the original ones. I need this mean image so I�ll correlate each of the original ones to find out the best image I
-
Just bought a new ipod touch downloaded itunes in my pc with windows 7 but every time i hook my ipod computer dont seem to recognize it - getting code 43 error. i have already reset my ipod but still getting the same error code on my computer. Is my
-
OOP And AS 3.0, Something That Confuses Me ALOT!
Hello everybody, there's something that's been on my mind for quiet a while now, and everytime I think about I get confused even more lol. Anyway, this might sound stupid to most of you but I donno, I just don't get it. There are many flash developer