I have tried to up date my OS to mountain lion but i get this messageThe product distribution file could not be verified. It may be damaged or was not signed.
i have tried to up date my OS to mountain lion but i get this messageThe product distribution file could not be verified. It may be damaged or was not signed. what is wrong
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go then move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading Mountain Lion.
Similar Messages
-
I have 10.7.5 When I try installing Mavericks, it says this: The product distribution file could not be verified. It may be damaged or was not signed. WHY?
-
trying to install new software for OS mavericks and i get the the product distribution file could not be verified. It may be damaged or was not signed error message
.can you assistWhat "new" software?
Barry -
^^
<Email Edited by Host>Somehow, the download is getting corrupted. First, try repairing your hard drive. Then make sure that you have disabled or uninstalled any anti-virus or internet filtering software. Also, verify that your computer's clock is set properly.
After doing all this, try downloading again. It may be worthwhile to download on a completely different network, especially since that will be the next step if re-downloading on your current network doesn't work.
PS - note that folks won't send you an e-mail directly from these forums, and posting your e-mail address on a public forum is generally not a good idea. -
i tried to install a new os x mountain lion, but the system asked me to provide the apple id and password that was used to buy the os from the apple store online. which i don't have. how do i go ahead to install my new os x on the mC
If you don't have the Apple ID and password, how did you get Mountain Liomn in the first place? Without the Apple ID and password, you'll need to buy it to download it.
Mountain Lion -
Hi folks,
I tried downloading the latest OS X Mountain Lion and [after a long time... I have a slow connection] I got an error message ... We could not complete your purchase The product distribution file could not be verified. It may be damaged or was not signed.
Everytime I retry or continue the download I just keep getting the same error message!!!
What can I do to get my product?
PMThe only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
I had Adobe Acrobat Serial loaded before the hard drive crashed on my old PC. I have tried to download Acrobat 9 on my new PC, but always get the message “This is not a valid serial number”.
I had Adobe 9 Standard on the old. But what downloads from the page http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html is Adobe 9 Pro. Perhaps this Pro version is the problem.
Anyway, can you point me to a way to install Adobe on my new PC?You can try Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools.
-
I have a 2013 iMac, with OS X version 10.8.5. Have been trying to download OS X version 10.9 (OS X Mavericks) without success; error message "we could not complete your purchase, the product distribution file could not be verified, etc". Please help; TQ
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
How can this error be corrected? "The product distribution file could not be vverified. It must be damaged or was not signed. So can this error be repaired? I have read good things about this updated software. I really looking forward to enjoying the benefits of using OS X Mavrick softtware in my daily life.
Another question can I operate laptop with other project while it is downloading?
Thanks,
Otis A. DrakefordPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I tried to re-download Mavericks after an apparent failed attempt and now I get the message "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
Can anybody help?Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
Step 1
Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 2
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 3
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
trying to upgrade to Mountain Lion, error message; " product distribution file could not be verified. It may be damaged or was not signed" ??
what to do? This is in App store. I followed the link e-mailed to me that an upgrade was available....... Puzzled.Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
Step 1
Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 2
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 3
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
The product distribution file could not be verified. It may be damaged or was not signed. is tge message I recieved trying to download Maverick, can you help?
Regards
Andy DicksonSeveral causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
Step 1
Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 2
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 3
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
Is there anything I should do differently? Is anyone else facing the same issue?
Kindly help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
Already purchase and sign. Lost internet data...aaaahh... .error - "We could not complete your purchase.The product distribution file could not be verified. It may be damaged or was not signed".
Update: i spoke to a very knowledgeable applecare representitive who walked me thrue the process, we were trying to figure out what exactly was preventing Mountain Lion from installing & (after a process of elimination) it turns out you need to be log in as an Admin to download it, we also made sure everything was up-to-date. Downloading Mountain Lion took about 40 minutes (with roadrunner high speed internet, DSL might be a bit slower) once it was downloaded the installation process was very intuititive with just a few clicks and about 35 minutes i had the latest Operating System.
-
I can't update IPhoto, it says "the product distribution file could not be verified it must be damaged or signed in" I bought it on iTunes and have 8,000 photos already. how can I update and correct this??
You might try resetting the App Store application and clear the cookies via this menu:
as described in this website: Make use of the Mac App Store debug menu | MacFixIt - CNET Reviews
OT
Maybe you are looking for
-
How can I share iphotos with others on the web using photo stream?
The apple instructions for iPhoto 11 says: It's easy to create a photo stream to share your photos. You can also view the photos you've already shared. To create a shared photo stream: Select the photos you want to share. In the toolbar, click the Sh
-
How to restore views and procedures after drop user command?
How to restore views and procedures after drop user command? We have 817 EE on NT and one developer created a lot of procedures, functions and vews. DB was not backuped and archived and export has not been done - our fault and we understand it. Sorry
-
Lion will not allow AFP file sharing
After upgrading my iMac to Lion, I tried to turn on File Sharing, but it would not allow it - I'd check the box, it would refuse the check. I had to go in to Options and check SMB Sharing to get File Sharing to work. However, I'd like to use AFP fi
-
Adding footnotes in Dreamweaver 2004
Please could someone help a Silver Surfer - I wish to include numbers in a text document i.e. (1)- (2) and link them to an explanatory footnote/s at the bottom of the finished document. By this I mean clicking (1) in the text links to Footnote (1) at
-
At some point almost every time I use Stacks View to make picks- which is often- I come to a point that I would call a Soft Crash. I've been experiencing this for quite some time, and I'm just now getting around to posting it. It usually happens when