I have tried transferring my purchased songs from my phone to my MacBook, it's asking to authorise the phone but does not give an option to do so, what do I do to get my purchased songs on my itunes
I have tried transferring my purchased songs from my phone to my MacBook, it's asking to authorise the phone but does not give an option to do so, what do I do to get my purchased songs on my itunes
Have you plugged in your iPhone to the computer? In iTunes > File > Devices you should be able to "Transfer Purchases."
In iTunes > Store have you authorised the computer?
Similar Messages
-
When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing! -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
I have transferred all my music from iTunes onto my USB to play on my car radio. The radio reads the music but does not play it in sequence. So it plays certain folders, then it skips folders. in certain folders it skips tracks. apparently there is a specific way to save the music into folders onto the USB with regard to naming the tracks and folders.. I have a Pioneer DEH-2350UBSW. Can anyone please help.
It is a stick, Cruzer Blade 16gig.
In the manual it says the following about the USB storage device:
1. Playable folder hierarchy is up to 8 tiers
2. Playable folders up to 500
3. Playable files up to 15 000
Under sequence of audio files it says that the user cannot assign folder numbers and specify playback sequences with this unit. It also gives an example of a hierarchy:
01 - folder
Under that is 02 which is also a folder
Under that are compressed audio files 01 to 05: folder number
Under that there is another folder same concept as above - I have attached that part of the manual in this response.
I named my folder - Folder 001 Artists name and then in that folder I added the tracks as:
001 Song title
002 song title
It played the 1st song in the folder and skipped to the next folder, I can't even locate the other tracks.
On another folder I saved 31 songs but only 29 played so I am not sure whether there is a limit.
All I need is an example of how to number and name everything. -
I just purchased a new Linksys E2500 router. It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4. When I try it responds that the password is invalid. I have connected my MacBook Pro, iPad and iPod Touch with the same password.
Charles Swigart wrote:
It will connect to all my other devices, but does not recognize the password when sent from the PowerBook G4.
Try putting $ (a dollar sign) in front of the password. -
I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?
No, you cannot seperate the audio and video stream.
You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
jules -
I can't rate or write a review for app on the app store. It allows me to write out the review but does not diplay my review after sending it. Can anyone point me in the right direction to get answer as apply refuse to reply or solve my problem. Ps thanks apple for ur ignorance
I have the same problem with another TeamLava app, Fashion Story.
-
# Question
I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?
The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.
-
Put in a CD from a textbook for school...it will bring up the files but will not play the CD... what do I do? Need fast help please!!
If it's a windows only dvd you'll need windows. i don't think you want to go to the trouble of installing windows on your mac right now. Don't you have a friend or relative who will let you use their windows computer?
-
can anyone tell me how to get crossfade to work...was working ok, but now for some reason when i click on a track and try to drag on a fade it just highlights the track but does not leave a fade on?
Hello mate!
Are you sure u have the option on the up-right side of the arrange window checked to x-fade? -
How do I uninstall a program that is running in the background but does not show in Force Quit?
Open Activity Monitor and look for the program. Select it and Quit or Force quit it from within Acitiviy Monitor.
Search for the application with Find Any File as it can search areas that Spotlight can't, like invisible folders, system folders and packages. You can drag the app and any associated files from the search result window to the Trash bin in the Dock.
OT -
When I try to download apps, a message appears saying that to move forward I have to agree to the new terms of the contract, but does not allow me to agree and not low Apps. Someone can explain what is happening?? thank you
Delete some stuff to make room on the device.
iCloud is not local storage and has nothing to do with your situation. -
How do I get itunes to recognize my bookmarks in Mozilla. When I sync my iphone, it does not give an option to sync Mozilla, only IE and Safari
Hello pbdanner,
It seems your iPhone isn't recognized in iTunes for Windows. The following article provides troubleshooting steps which may help you find a solution:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
I have a problem that my phone only vibrates but does NOT ring any more. No matter what I try to do with settings turning off "silent" or whatever nothing helps. Do I need to reset. what are the consequences of resetting?
What a numpty! Yes of course you're right.
Couldn't find the answer when searching the forum but then came accross this.
Next dumb question coming up! :-(
Maybe you are looking for
-
Send mail in WDA using FM SO_DOCUMENT_SEND_API1
Hi, In Web Dynrpo Application for ABAP, I created a method that call FM "SO_DOCUMENT_SEND_API1", this method can send an e-mail when I click on the button "Send". The e-mail contains the date system (sy-datum and other informations ). I want to organ
-
Hello, I have a dilemma. I have around 40,000 PDF of documents which need to extract information. There are many tools on the internet but I want to know if adobe has some method to extract this information. The detail is that also have to extract in
-
OS: READHAT 5.8 DB: 11.2.0.3 Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2908 Available space (kbyt
-
Error getting the table form SQLdatabase
Hi I am trying to get the table form database. Connection is fine but when i am trying to display tables: C Thread ID:6388 C dbmssslib.dll patch info C patchlevel 0 C patchno 72 C patchcomment MSSQL: Thread check in DbSlDisconnect (
-
IllegalStateException on IPortalComponentRequest.getNode()
Hi, in the console ErrorLog I very often see an error like this one: [code]Jan 13, 2006 1:52:40 PM # Client_Thread_0 Fatal Exception ID:01:52_13/01/06_0013 com.sapportals.portal.prt.component.PortalComponentException: Error in service