I have tried updating my ipod and it says to connect to i tunes i have but and reseted my whole i pd but it still

i need help! i am unable to use my ipod for anyreason due to the update

Connecting the device to iTunes means that you have to restore the device now. Look for help here.
Use iTunes to restore your iOS device to factory settings
or look for help here, if that didn't work.
If you can't update or restore your iOS device

Similar Messages

  • HT201210 My i pod 4th gen is disabled.  It says to connect to i tunes.  I did and it still says it.  What do I do?

    My 4th gen pod is disabled.  It says to connect with I tunes.  I did and it still says the same thing on the screen.  What do I do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HT5457 I have an iphone 3Gs, it was on contract from O2 which is now terminated. I have had it unlocked by O2 and have tried updating it to the current software via Itunes. It seems to have gone back to factory settings and not its telling me it cannot ac

    Hello
    I have an iphone 3Gs, no longer on contract and unlocked by network provider.  I've tried updating the software and it has gone back to factory  settings, but it's telling me that it cannot activate the phone due to activation server is unavailable.  Is there anything I can do to get the phone working again?

    Did you get the 'Congratulations. Your iPhone is now unlocked." message?
    Was your iPhone hacked or jailbroken prior to the unlock attempt?
    Does the app Cydia appear on your iPhone?

  • My ipod wont show up in itunes. and then on the ipod itself it says to connect to itunes. I have uninstalled and reinstalled itunes.  any advice?

    please help me. i pluged it into my computer in which i already have i tunes from an old ipod touch and the ipod wont come up in i tunes and its says on the ipod to connect to itunes. i have uninstalled and reinstalled itunes already and it didnt work. please help

    Did you try to connect in recovery mode? http://support.apple.com/kb/HT1808
    Did you make sure that Apple Mobile Device Service is still active on your computer? http://support.apple.com/kb/TS1567

  • HT5567 When I try to update my iPod touch, it says 'not connected to the Internet' when I am! Disappointment, apple!

    Title explains. Also, I tried disconnecting it and then reconnecting it, but no luck. I am writing to you on my iPod touch(5th gen ) so as you can see it has Internet access.

    Try updating the iPod touch again.
    A few people in this thread say the problem isn't happening anymore.

  • I tried 16 times to restore my ipod cause i forgot my pw and it says to connect to i tunes is there any other way!!???? help please

    please i need help even if i need to call someone

    You may have to place the iOS device in Recovery Mode to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT1212 i pad is disabled and it says to connect to i tunes.  The password was entered incorrectly too many times.  I tried to hold the home key and put the USB cord to turn it on.  It turns on but still says enter password into IPAD.

    When I turn my ipad on it says it is disabled and connect to ITUNES

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • HT201263 I forgot my passcode to iphone 4s. I entered wrong and now it says, disabled connect to itunes.  I have some VERY important information on the phone and it was not backed up. Is there anyway I can unlock my phone and not lose my information?

    I locked my iphone 4s, I forgot the passcode and it says disabled connect to itunes. I have some very important information on the phone I can't lose, How can I retrieve that information if the phone was not backed up to icloud of my mac? I will go to court over this to prove it is my phone.  I just can't lose this information. Please, Please, Please, help me. I will mail the phone in to apple store if that will help.
    Leslie

    Kyderbylove wrote:
    I locked my iphone 4s, I forgot the passcode and it says disabled connect to itunes. I have some very important information on the phone I can't lose, How can I retrieve that information if the phone was not backed up to icloud of my mac?
    You can't. If your phone is disabled, the data has already been erased...that's the whole point of the passcode. Your only option now is:
    Turn your phone off, then force it into recovery mode & restore it:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes.  I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge.  Help?

    When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes.  I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge.  Help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    After restoring to factory settings/new iPod you will then have to restore from backup
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • I have just updated my Ipod to the latest ios.(deleting everything) and using different sources to get my music back it seems that every time i select multiple/individual songs on itunes i can change artwork but will not show up on my ipod?

    I have a windows 8 computer and have recently updated my ipod to the latest ios and it has wiped my Ipod clean except for my photos. whilst trying to get my music back using different sources like CD's and stuff i cant seem to get any album art to load on my Ipod? I can go on itunes and highlight single/multiple items and change the artwork and my computer will confirm it but when I look on my Ipod it doesnt display any art work or allow me to change the artwork that is already there? i need help please!

    Album artwork can be added/changed on songs via the iTunes Get Info menu item from the File menu. Note that music that you loaded from CDs will not have any artwork. If you want to aquire artwork you can try the File menu item Library > Get Artwork or you can download artwork from the internet, etc. Note that just changing artwork on your computer won't affect the iPod until you sync.
    If the artwork is correct on your computer iTunes then delete all the music on your iPod by syncing with iTunes with no music selected. Then reload the music onto your iPod by again syncing with iTunes with all the music you want selected.

  • TS3694 I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at al

    I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I can's see my Ipod in Itunes, I have tried updating Ipod & Itunes

    I can't see my ipod in itunes, i have tried, updating ipod but it wont let me. i have tried repairing, removing and re-installing itunes but still no luck.
    please help????

    I answered on your other thread....
    iTunes Does Not Recognize Your iPod
    Does Windows see the iPod?

  • I can't get facetime or imessage to work and i have just updated my ipod to get them

    This is my first post. I have just updated my ipod and it has given me things like, Imessage, reminders and newsstand. I tryed to start up imessages and it said:
    "An error occured during activation. Try again." so i do and it comes up with the same message. It does the same for facetime. I've had my ipod for over a year  so im not new to facetime just imessage.
    It might just be me but has anyone else had this problem or have any ideas how to sort it?

    Have you looked at this previous discussion:
    Can't Activate FaceTime

  • I tried updating my ipod touch to iOS6 then an unknown error occured so i disconnected it an now it is stuck on the apple sign and has a loading sign and has been like this for 2 hours. what can i do?

    I tried updating my ipod touch to iOS6 then an unknown error occured so i disconnected it an now it is stuck on the apple sign and has a loading sign and has been like this for 2 hours. what can i do?
    My home button is also unresponsive and i have to press it really hard to make it work.

    Do you remember the the exact wording of the error message:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Maybe you are looking for

  • Matrix Program - First time using multiple classes

    I'm writing a program right now that takes matrices from an input file specified by the user. The file is in this format. #rows #columns 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 So in place of #rows I would have a 3, and #columns would be a 6. They are se

  • How Do I Get My Sound Effects back in iMovie'11?

    I recently lost my mac's memory due to software issue. But now that everything is back in order, I found out when i opened iMovie'11 that my sound effects are missing. Does anyone know how to get them back?

  • Regarding STATUS FIELD INFORMATION OF T.CODE CO03(Display Production Order)

    Hello Friends, I want to know, how could i get the Status field information from T.CodeCO03(Display Production Order). Any F.M or Table Name. I have production order Number as input field and output will be Status. Regards Amit

  • Inserting dashes in phone numbers

    Is there a way to insert the dashes between the area code and prefix and prefix and number on a curve. It would make the number so much easier to read. Message Edited by adbva on 10-29-2008 11:33 PM Solved! Go to Solution.

  • SD module and PS module

    Dear Experts, How integration is taken pace with SD module and PS module? Can you explain the process detail? Regards Ishikesh