I have trouble finding the drivers to install a PCI-6024E data acquisition device.

I can't find which drivers I should get to install a PCI-6024E data acquisition device. I had NI-DAQ 7.1 and I just upgraded to version 7.2, but it still doesn't work. From what I read, this is a plug-and-play device, so, if the drivers are in my computer, Windows XP should be able to complete the installation without any problems; we have a PCI-6110, which was re-installed correctly.
Any help would be greatly appreciated.

Hello,
NI-DAQ is the correct driver for the PCI-6024E and PCI-6110 devices. Since you have two devices, you should try a combination of installations to see if you can narrow down the problem to a possible damaged board.
What I mean by this is the following:
Install the 6110. If it works, pull the device and plug the 6024E into the same PCI slot and see if it works. If it does not, then you may want to consider calling National Instruments at 866-275-6964 and requesting a Return Material Authorization to get your device repaired. If you call in, you will probably be asked to go through a few more troubleshooting steps with an Applications Engineer to try and determine exactly what it is that might need to be repaired.
If it does work after perfoming th
e above test, post back to his discussion so we can troubleshoot further.
Jared A

Similar Messages

  • Image Capture and Preview have trouble finding scanner. Photoshop no problem.

    Image Capture and Preview have trouble finding the scanner wirelessly unless it is on when the Mac starts up. Photoshop finds the scanner no problem. Any suggestions for Image Capture or Preview?
    The scanner is Canon MP620. Mac is MBP, running 10.8.2
    I have done all the uninstall, reinstall, update drivers, etc. Please don't bother suggesting that stuff.
    Thanks.

    As for the scanner - so is this new one wireless? When I hooked up my Epson All-in-One, I had to install it via USB first before I could install the wireless (per their instructions).  With Snow Leopard, I simply installed the driver and it covered and recognized both the print and scan function - not so in Lion; I had to go through hoops with the scanner part and it finally showed up as a separate unit. I thought that is silly, but - as long as it works.....  I'm trying to think of possibilities since I'm about out of ideas, so you might want to consider that (if it applies). The other troubleshooting suggestions usually include redoing the "add" function after a reboot.
    As for Image Capture, I am out of ideas. FWIW, I never use it - in my workflow, there is no need for it. Not sure if this would have an impact, but make sure that you choose Image Capture in the CDs&DVDs Preference Pane (mine is set to ignore or ask purposely):
    If that does not work, I'd suggest reinstalling the OS over the top of what you have.

  • How to install all the drivers for the MacBook with Windows 7 or 8 without the disk from OSX Lion? Where can I find the drivers?

    Guys, a have one big problem..My customer brought me a macbook with windows 7 installed to do a format and reinstallation, but she is no longer the OSX Lion, and do not know how to install the sound drivers, "touchpad", among other drivers, how to solve this? Where can I find the drivers? The MacBook is now with Windows 8 installed.

    Sorry my bad english..
    See is meant. The MacBook has already come for me with Windows 7 installed, checked that it does not have another partition with OSX Lion installed, do not know how the person who did the maintenance before I managed to remove the partition with the Lion, so I can not create a disk or access boot camp because there is no partition Lion and don't own the DVDs of OSX Lion, you understand me?
    There is a boot camp Windows executable? Where do I find, since I poked around and found nothing on ...
    The sound driver is installed, but not working ... and the rest are missing there also, the trackpad also does not work correctly, the right button does not work ... My experience with mac is low, it may be that you do not know how it works correctly the trackpad

  • I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

    I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

    You won't find them until you are in Windows.
    Helps to read even print the guide.
    If you have auto run enabled, which is a security risk, the Apple setup.exe will run.
    Otherwise, just run that.
    Either use your OS X DVD, or use the drivers downloaded by Boot Camp Assistant.
    Two different ways to get them.

  • Where would I find the drivers for an external device after I install it?

    Okay, so I need help. I installed a driver for osx 10.5 thinking that installing the software 10.7 would support it. If it did, then it created a bigger problem, which is I cannot create a USB Ethernet connection in the networks pane. Mind helping out and telling me what I should do?

    you would generally find the drivers for an external device on the manfacturers website.  However, with printers for example, I have recieved updates directly through Software Update.

  • I have OS 10.8.2 and connected the scanner Canoscan Lide110. I downloaded the drivers, looked installed, the scanner appears in the system preferencies, but it doesn't open!!! what i have to do? thanks in advance for your kind advice!

    I have OS 10.8.2 and connected the scanner Canoscan Lide110. I downloaded the drivers, looked installed, the scanner appears in the system preferencies, but it doesn't open!!! what i have to do? thanks in advance for your kind advice!

    Thanks for your help Karen Serena. Obviously, it appears in the list of printers and scaners on the left, into the "Print and Scan" with system preferencies. Then i click it , it appears on the right, then i click "open scanner" below the name and opens a window writing "open device failed". When i connect the scanner, it makes a sound but that's all...the scanner is dead, even if I push any button...Also there isn't any window opened to prove the function of the scanner, only is shown in the scanner list, that's all.

  • I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?

    I have Final Cut Pro X (10.0.9) and would like to change my project settings but I am having trouble finding the 'Modify Settings button.'  Where exactly is it located?  Here is the link which gives the instructions but doesn't seem to say where the 'Modify Settings Button' is located: http://support.apple.com/kb/PH12526?viewlocale=en_US

    You have to choose – one settigf or another.
    The thing is.your HD clips will look better in an SD project than your SD clips will in an HD project.
    WIthout knowing much more about your project and the kind of content, it's really hard to be specific. But generally I'd let my project settings be guided by what fraction of my timeline will be made up of HD clips and how much SD clips. If it's 75% HD, I'd probably do an HD project…and so on,
    Good luck.
    Russ

  • I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

    I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

    Have you looked on Lexmark's support site?
    http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

  • I cannot find the drivers on the website for Qosmio x300-15h

    I have used my toshiba qosmio x300-15h for many years but it has been in russian , the user has been fine with this but now i need to sell it and have installed english windows 7 32bit home premium on it , but it seems the nvidia graphics cards are not working, but everything else seems to be and i cannot sell it like this .
    i cannot find the drivers on the website as this is a russian model
    does anyone know where i can get these drivers ?

    Hi,
    I just did a quik look at uk Toshiba drivers for Qosmio X300 and they seem to be all there. I think those drivers should be suitable for your laptop regardless of the language used.
    here's the link:
    [http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK]

  • Please help me to find the drivers/software for SB Surround

    Hi all!
    Does anyone know how to find the drivers fo the SB Surround 5. external sound card?
    Since the HW looks quite similiar to the LIVE 24bit external I tried to install the drivers for it but they didnt work.
    I can not find the SB Surround 5. card in the auto update section.
    Thanks in advance/Bartek

    Here is the link
    http://support.creative.com/downloads/download.aspx?nDownloadId=0588
    The driver suite gives you all the software, plus the newest driver.
    Unfortunately, creative still hasnt listened to us and has not given us DDL. There was no real need to waste 60 bucks on this thing, if all it does is increase sound quality a tiny amount. When I saw the device I, along with many other customers, came to believe that it would allow for surround sound music. However, the device only outputs media that is already in surround sound, as 5. . I have tried AC3 filter, kx driver (wont work) , rednoreck (no asio) , and tons of random plugins for winamp. I have no idea how to get stereo upmixed to 5. with the spdif out on this card. I am going nuts because of this. If anyone knows how to do that please let me know !?

  • Where can I find the drivers for my Compaq Presario V2000?

    I have had to reload XP Pro on my Compact V2000 and did not have the drivers for this computer. I would love to find the drivers to load back on this old computer.
    Keith
    This question was solved.
    View Solution.

    Hi:
    Here is what you need to do, but you will not have Aero as the GMA900 video adapter is not completely windows 7 capable.
    Download and run this Vista driver from an HPQ nc6220.
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-472...
    It will error out with a message that states in substance that the operating system is not supported.
    Close the error window and go to the device manager.
    Under display adapters, click on the Standard VGA Adapter. Click on the Driver tab. Click on the Update driver button.
    Select the "Browse My Computer for Software" method of installation and browse to the driver folder that was created when you ran the file.
    That folder will be located in C:\SWSetup\sp34749.
    Make sure the Include Subfolders box is checked, and the driver should install.
    On reboot you should have decent graphics but no Aero.
    Paul

  • Cannot find the HTML browser installed on your system

    Guys forgive me if you have answered this before, I have
    tried a search of previous issues TNA.
    I have reloaded R/H 6 to my laptop (with full admin rights
    set against my user name) everything except works except generating
    in Microsoft HTML Help I get the following error when I click
    Finish: cannot find the HTML browser installed on your system
    Any ideas welcome. With thanks, J

    Hi JayRichard
    You might try the following.
    Inside RoboHelp HTML, click Tools > Options...
    Click the Tool Locations tab
    At the bottom of the dialog should be an area listing
    "Browser paths". You should see one for Internet Explorer and one
    for Netscape. Try clicking the little file folder icon to the right
    of one of them. (Whichever browser you are using)
    Navigate to and select the executable file for the browser.
    Mine for Internet Explorer says:
    D:\Program Files\...\iexplore.exe (The full path is
    D:\Program Files\Internet Explorer\iexplore.exe
    Dismiss the dialogs by clicking the Open and OK buttons until
    they are all gone.
    Keep us posted on whether this helps... Rick

  • Where i find the drivers for hp j5783 scaner

    where i find the drivers for hp j5783 scaner

    Hello ezraie, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are looking for the drivers.  I would like to help.
    I would recommend following this link to the HP Officejet J5783 All-in-One Printer Drivers.
    Please let me know if you have any questions.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Equium A80-132 - Where can I find the drivers?

    Hi to all.
    I need to format the hard driver of a toshiba computer that I have:
    MODEL NAME: EA80-132
    MODEL NO: PSA87E-003004IT
    SERIAL NO: 35145667K
    I found in this forum this [thread|http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=30204] ] that suggest to search the driver at this official toshiba link:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
    I try this, but I can not select my model number. I think because is a little old...
    Anyone can help me to find the driver (all driver) for this computer??
    Thank's in advance and sorry for my english...
    BYE

    Hello
    You have to search in *Archive* to find the drivers:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    *Archive* => Equium (Notebooks) => Equium A Series => Equium A80 => PSA87E
    I think there you should find all what you need ;)
    Greets

  • Does windows 7 support hp phototsmart 618 camera...If it does tell me where to find the drivers

    I need to find out if Windows 7 64-bit support my photosmart 618 camera
    I cannot find the drivers for it....I have the software loaded but I need the
    drivers to make it work
    Thanks

    Do you only need to transfer pictures or to do something else?  I used to have this camera although I did not use it with Windows 7.  You ought to be able to transfer pictures by switching the camera to the "USB Disk Drive mode".  You can do so by following these steps (copied from this document, which is the page with instructions on how to connect the camera to a Mac -- it should work the same for Win7 connections).  Let me know if this works.
    Setting the USB Disk Drive Option
    Set the camera to Capture mode.
    Turn on the camera.
    Press MENU to display the Capture mode menus on the image LCD.
    Press the right arrow on the 4-way controller three times to move to the Preferences menu.
    Press the down arrow on the 4-way controller three times to move to the PC Connect Mode menu option.
    Press the left (Edit) soft key. The PC Connect Mode submenu is displayed.
    Press the up arrow on the 4-way control to highlight the USB Disk Drive option.
    Press the left (Select) soft key. Return to the Preferences menu of Capture mode. The camera is now set to the USB Disk Drive mode.
    Note: The USB Disk Drive mode will remain set on the camera until it is reset by the user.
    Craig
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    I am an HP employee.

Maybe you are looking for