I have two 30 GB iPod's, B&W. But only on will work with iTunes.

Only one of my iPod's will work with iTunes
And I cannot use my other one, because I can't transfer the music on the white iPod on iTunes to the black one.
Any answers? :<

Are both iPods connected at the same time?
http://docs.info.apple.com/article.html?artnum=61713

Similar Messages

  • I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Question
    I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
    ::Worked for me::

  • I have restored my ipod nano 2nd generation but its still not working

    i have reset my ipod and restored it but it is still not working. i have connected to itunes and it has loaded some music onto it but though the light comes on you cannot see anything else on the screen. any suggestions would be appreciated

    It might be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • I have two different iPods.  How do I connect the new one to iTunes?

    I now have two iPods - a 30GB iPod I purchased about a year and a half ago which plays music, Audible books, and has photos slide show capability plus color screen. Yesterday I collected enough credit card points to afford the new 5th Generation iPod. Yeah, I'm an iPod addict. I wanted the video capability. So now I have it. My question is:
    Do I have to download iTunes again, or can I connect my new iPod to the iTunes that I have been using for my other iPod? I can't find the answer to this question anywhere. Also:
    Can I connect the new iPod on the same computer as my old iPod is connected on without getting confusion on the iTunes site and on the iPod?
    Dell Dimension   Windows XP  

    Ya, you can simply connect it to your current iTunes and go. More info here...
    How to use multiple iPods with one computer
    http://docs.info.apple.com/article.html?artnum=300432
    Using iPod with multiple computers
    http://docs.info.apple.com/article.html?artnum=61675
    Managing content manually on iPod
    http://docs.info.apple.com/article.html?artnum=61148
    iPod: Frequently Asked Questions
    http://docs.info.apple.com/article.html?artnum=60920
    Patrick

  • I have two javascripts in one (index)page, but they don't work

    Hello,
    I' ve two javascripts (one for a warn of my pics and one for a "nedstat"-counter). Before, with one script (of both) the scripts are working. I have found on the internet an example tutorial with <body onload="dothat();dothis()", but how do I write this tutorial (or an other solution) in my html (I'm working with Star/SunOffice 5.2)?

    Click on the link below:
    http://forums.internet.com/WebX?[email protected]^[email protected]
    and click Add Discussion to describe what you need (if the scripts are not too long, you might want to cut-n-paste them; otherwise, a link to the page would be helpful).
    V.V.

  • Finally able to reset ipod, now I can't get it to work with itunes

    I would appreciate any assistance, as I am growing very frustrated.
    Friday night I was conducting a routine manual sync of my ipod. Everything was routine until I hit the disconnect button in itunes. My ipod disappeared from itunes device section, but "do not disconnect" stayed on the ipod's screen. I have had this problem before, and fixed it by resetting the ipod, so I tried that. The ipod would not reboot- I could hear noises as if the hard drive was spinning up, then the drive would stop. Then it would spin up again...etc. It did this over and over again, never even getting as far as the apple logo. I was able to put it into diagnostic mode but wasn't able to figure out anything helpful. Later that evening, I tried again to get the ipod to reset, and this time it got as far as the logo and stayed there.
    I plugged the ipod into an outlet and let it charge overnight, and discovered that the next morning it had evidently reset to factory settings- all my content was gone, and the ipod asked me to select my language on startup, but it was again booting normally. However, when I hooked it back up to my computer via usb cable, I had problems again. Windows asked if I wanted to reformat the drive and I said no. Itunes refused to recognize that I had plugged the ipod in, even though windows clearly had and the ipod had the "do not disconnect" symbol up. I tried resetting the ipod and the computer. This time, itunes recognized that I had connected the ipod and asked if I wanted to reformat it. I said yes but itunes quickly froze and would not allow me to close it or end the process via task manager. I had to reboot to get itunes working again.
    This is the situation I'm in now. Windows clearly recognizes the ipod- it shows as working in device manager and windows always asks if it should reformat when I plug it in (I tried saying yes once, but that didn't do anything). When I tried to select the ipod in windows explorer, explorer froze. When I open itunes after the ipod has been plugged in, or plug the ipod in while itunes is running, itunes refuses to recognize the ipod and freezes completely; task manager cannot end the process and the only way to restart itunes is by rebooting the computer. Trying to disconnect the ipod via windows' 'safely removal hardware' utility causes the utility to freeze and does not affect the ipod. The only way to get the ipod to stop displaying "do not disconnect" is to reset it, which again causes the ipod to (slowly) reboot and ask me to select a language.
    I have tried reinstalling itunes. (It's 9.0.3 now.) I've tried switching usb cables. I've tried switching usb ports. I have tried to put the ipod in diagnostic mode, and I've tried putting it in disk mode- I'm not able to do either. I've been through all the relevant apple support pages I could find and I'm still unable to even diagnose exactly what the problem is, much less how to fix it. It seems more likely than not that the problem is the ipod itself rather than itunes, given my problems Friday night, but I have no way of knowing for sure.
    The ipod is a 5g, 30gb, that I purchased new in December of 2006. I am running itunes 9.0.3 on windows vista home premium. Let me know if more details of my hardware/software are needed.
    Thanks,
    Lindsay

    You're not alone. I am having similar problems with my Ipod 5th gen 30gb.
    When I connect it to my laptop (Vista - basic) it is not recognised by itunes. Itunes simply locks up.
    So far I have tried the following to no avail:
    Checked my pc's device manager - it recognises the device and says it is functioning properly.
    Checked the drivers to make sure they are upt to date.
    Uninstalled & reinstalled a previous version of itunes (as it worked fine before the latest release).
    Reinstalled the latest itunes.
    Reset the ipod.
    Put the ipod into disk mode and reconnected to itunes.
    Have tried to use the windows tool to scan and fix any bad sectors but it fails to complete a scan without locking that up as well.
    Placed into disk mode when fully charged and then allowed the battery to drain completely. Then reconnected ipod (in disk mode)and it still is not recognised and locks up itunes.
    At this point I dont really want to part with another $300 odd dollars for a new one.

  • I have an iphone 4 and want to know if it will work with my polaroid pogo printer

    i have an iphone 4 and want to use my polaroid pogo with it, can I?

    Printing to a Pogo via "AirPrint" defeats the portable aspect of these cool zink printers.
    If this iPad is supposed to replace laptops in this, ”post-PC era,” then why doesn't it support all of the basic Bluetooth protocols or stacks or whatever they're called that my Mac supports?

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • TS1814 Most of the songs on my iPod Classic no longer dshow up on iTunes on my laptop.  I deleted iTunes & installed the latest version but this did not change anything.  For example on 1 playlist I have 66 songs but only 1 shows on the iTunes screen.  Th

    Most of the songs on my iPod Classic no longer show up on iTunes on my laptop.  I deleted iTunes & installed the latest version but this did not change anything.  For example on 1 playlist I have 66 songs but only 1 shows on the iTunes screen.  Thanks you for any help.

    See Empty/corrupt iTunes library after upgrade/crash or
    Recover your iTunes library from your iPod or iOS device.
    tt2

  • Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    Hello, I have two questions on time capsule  I can only have it on my external hd files and free up my internal memory to my mac  I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

    I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
    There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
    and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
    Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
    Again everything is explained in the reference.. you are not reading it.

  • I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution.

    Dear sir,
                    I have a ipod classic 80Gb version 1.1.1 pc , but I can't sync with iTunes . Please give a solution
    Yours faithfully
    Vineesh

    Hello Vineesh
    Try out the troubleshooting assisting below to get your iPod Classic to start syncing again properly.
    iPod classic Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/classic/
    Regards,
    -Norm G.

  • How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

    How come I can't put music on my ipod? I already have a fair amount of music on my ipod but I have enough space for more. I am using a new computer with itunes and it is telling me if I wasnt to put the new music on my ipd i need to erase my ipod HELP!

    Because you can only synce with one iTunes library and you are switching libries by using the new computer. To nake this yyour syncing computer:
    - Move all the media(apps, music, synced video and photos etc) to the new computer.
    - Connect the iPofd yo the computer and bake a backup fo the iPod by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup.
    Note that the backup that iTunes makes doe not include media.
    To move mdia to the new computer see:
    iTunes: How to move your music to a new computer
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer

  • How do I sync music onto old iPod when my music is on iTunes match? I have connected the iPod to my mac but it indicates no music to sink (as my music is in the cloud). I assume there is a simple way to resolve without downloading all music onto my mac?

    How do I sync my music onto an old iPod when my music is located on iTunes match? I have connected the iPod to my mac but it indicates no music to sink (as my music is stored in the cloud). I assume there is a simple way to resolve without downloading all music onto my mac as this would be ridiculous?
    Any halp with this would be excellant.
    Thanks :P

    Hi,
    Your old pod can only sync with music that is physically in your itunes library and on your hard drive. Therefore there is simple way to resolve is to download your music to your hard drive.
    Jim

  • I have two e-mail accounts. A lot of my content is with the older account which is deactivated. How do I get  iTunes to recognize this content?

    I have two e-mail accounts. A lot of my content is with the older account which is deactivated. How do I get  iTunes to recognize this content?

    Authorize the computer for the account.
    Content is permanently tied to the account it was acquired wtih.

  • I have two textframes on one page. But when iterating using everyitem() it picks second prior to first?

    Hi Expert's
    I have two textframes on one page. But when iterating using everyitem() it picks second prior to first?
    var ObjDoc = app.activeDocument;
    var LstPara = ObjDoc.pages.everyItem().textFrames.everyItem().paragraphs.everyItem().getElements();
    for(var c1=0;c1<LstPara.length;c1++)
         var par = LstPara[c1];
         $.writeln(par.contents.toString());
    is there any specific reason for that? Please explain

    To solve your issue, try the below code:
    var ObjDoc = app.activeDocument;
    var LstTxtFrame = ObjDoc.pages.everyItem().textFrames.everyItem().getElements();
    for(var c1=LstTxtFrame.length-1;c1>=0;c1--)
        var LstPara = LstTxtFrame[c1].paragraphs.everyItem().getElements();
        for(var c2=0;c2<LstPara.length;c2++)
            var par = LstPara[c2];
            $.writeln(par.contents.toString());
    I have two textframes on one page. But when iterating using everyitem() it picks second prior to first?
    is there any specific reason for that? Please explain
    InDesign text frames will work in LIFO (Last in first out) method, i.e., the last created text frame will be treated as a first frame in for loop, hence try the above code.
    Vandy

Maybe you are looking for

  • How to make the invoice number a hotpsot in Payment program F110

    Hi, In the standard Automatic Payment Program F110 when we do a payment run and see the list of proposed Invoices that will be cleared - the requirement is to allow the user to double click on the invoice number and it should go to FB03 or MIR4 depen

  • M Audio Interface and MicroKorg.

    I just bought an M audio fast track usb interface. I cant seem to get it to work with my microkorg. everytime i press a key, the lights on the front of the interface light up, but i hear no sound. can someone please help me. thanks

  • Cannot find my Satellite L350-10H - external video full HD output

    Hello Everybody. I have a problem with my satellite L350-10H when I try to attach a second external monitor in full HD. In fact Im only able to duplicate my Notebook Display with the same resolution (1440 x 900). The System don't allow me to set a Fu

  • FUNCTION MODULE RELATED TO CUSTOM IDOC

    HI ALL, i have an requirement to create a catsdb custom idoc with four fields        1.Personnel Number         2. Date         3. Activity Type         4. Counter    I created a custom idoc and had successfully send to receiver. now that idoc should

  • R3AS Equipment download not working with filter

    Hi, all I set filter equipment in r3ac1 and then I executed initial download Load Object EQUIPMENT in r3as. but occur abort EQUIPMENT in r3am1 and outbound queue MASS_CRM_CS_EQU_* and R3AD_CS_EQU_* are stop in R/3 there are entries 1. I apply Note 83