I have two adobe 9 files loaded on my computer. One is from 2008 and the other is from 2010.
Do I need both? If not which one shou
ld I remove.
liktwolook wrote:
Ok OS (operating Sys) Windows XP
Thank you; in order to provide help, we need to know if you are on Windows, Mac OS, or whatever other OS where Adobe Reader is supported.
Now, you write that you have "two Adobe 9 programs listed"; where is that - under Add/Remove Programs, or on your disk? Can you provide the exact names of these programs?
On disk, Adobe Reader is usually installed at C:\Program Files\Adobe\Reader 9.0\Reader - if this is where it is on your computer, where is the other one?
Similar Messages
-
I now have "Photoshop CC" and "Photoshop CC (2014)"
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671 -
I need to make an independent web page for my DAR chapter and upload it through them. I cannot get iWeb to load. It will open and then freezes. I've tried it n both the iMac and the iBook with the same results. What am I doing wrong?
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT -
I've downloaded two adobe cs6 files to a new computer. How do I activate photoshop with these files?
i said the 2nd file name you listed in message 6 was incorrect, not the file name in message 8.
but if the file name message 8 is correct, both names in message 6 are incorrect. or you just might have a typo for the first file name.
in any case, make sure both file names are exactly the same but have different (a 7z and an exe) extensions, put both in the same directory and then click the exe. -
I have two excel files I cannot open or delete from my desktop. One is titled 6ACAD200 and the other file is titled 8D73A700. How can I get these off of my computer?
From the names I'd guess they are temporary files. If excel is running, quit and try again. If they still won't move or delete reboot. If they still won't move or delete...kill a chicken at midnight under an oak tree?
-
Good Evening, I have just purchased a Macbook Pro, and have downloaded two SD cards of a trip to USA and Canada last September. One via Lightrooom 4 and the other via iPhoto. I tried to import the SD card via iPhoto into Lightroom 4 but could not find it. I tried to find this "folder"? via other means with no success. however when I open iPhoto, there it is, so it must be on the Hard Drive somwhere??? I am new to Apple having decided to jump ship from Windows. Would be grateful for any help.
iPhoto is a - like Lightroom - Photo Manager. It's a database. Like any db to get data out you have to export it.
File -> Export
and in this case set the Kind to Original.
iPhoto is a $15 app, LR is somewhat more expensive. As they both want to manage the photos there's no good usage scenario where you use both. Pick one horse and ride, essentially.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue. -
i have two apple id one for Store purchases and the other for iCloud, and i want to merge them into one, can i transfer all app from one to other ?
It is not possible to merge Apple IDs.
-
I have two iPhones, one is a 4s and the other is a 3g. I have not used my 3g in some time now. I recently restored it but I cannot use it without a sim card, it says i have to "activate it." I cannot place my iPhone 4s sim card in it (too small), and i do not want to get a new contract or sim card for an iPhone that i do not ues very much.
Thanks for your help, but i cannot borrow a noral sim card now, my family has all up graded to iPhone 4s's, i have done this before, but one of my family had the same type of iphone so i could use theirs. Now i am the only one who still holds on to their old phone... I am not sure about buying an adapter...
-
Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.
-
I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?
connect, then in SystemPreferences/Displays you can set the two as you want.
-
I need to deactivate two old computers and reinstall CS3 on two new computers. How can I do this if one is long gone and the other just crashed?
contact adobe support and request an activation count reset, http://helpx.adobe.com/x-productkb/global/service1.html
-
Can I sync two computers when one is using lion and the other snow leopard
can I sync two computers when one is using lion and the other snow leopard
will my data be shared well using Mobile Me?
-
I have 2 iPads. When downloading an app on one, it also appears on the other. I don't want to create a second iTunes account. How do I stop this?
On the device you do not want the auto downloads to be installed on: Settings/iTunes & App Store. Deselect what you do not want to be automatically downloaded.
-
I have two airport extremes, one acting as a modem and the other operating in bridge mode. The extremes are connected using ethernet, but remain connected even when I disconnect the Cat5a cable (I did this to check that the 100 feet of Cat 5a cable connecting them was working). How do I find out if they are operating wired or wirelessly? I want to know as I assume I will get much better speeds if they are wired.
Hi Bob, many thanks for the prompt response. I think I did what you suggested, but you're the expert so I have sent over a few screenshots. The extreme in question is High Birches Home Office (the rest of the network has been in place and working well for some time). My new home office is going to be in the garden, circa 100 feet from the main house. I have installed armoured Cat5e cable down to the shed that is going to be adjacent to the home office once built and situated the High Birches Home Office Airport Extreme there temporarily. Everything works well, so I was surprised when I unplugged the ethernet, that it still worked. I also tested the ethernet cable by switching off my laptop's wifi and unplugging the cable from the airport extreme and directly into the laptop and that worked ok.
If the screenshots below (I did every Airport utility tab for the High Birches Home Office) don't tell you anything more, then the set-by-step instructions would greatly appreciated so I can ensure I completed the steps correctly.
Many
Thanks, Greg. -
I have 2 gmail boxes on my MacBook Pro. One is mine and shows as Gmail and the other is my husband's which shows as his email. When I send an email, it has my email address in the From line automatically, but when someone replys it comes back to my husband's email box. How wo I fix this?
I have this exact problem. I have 3 email addresses on my mac and I can select one, and the email still be sent through another account and I won't know it until I get a reply for that email in one of the other accounts.
MacBook Pro, Mac OS X 10.9
Maybe you are looking for
-
After a backup all music files are invisible and iTunes don't see anything
Hi, I got a very strange problem and I'm really lost. I made a backup of my portable iTunes libray (using a 160 GB Maxtor one touch 4 mini usb) on another backup disk (750 GB Maxtor onetouch III firwire 800). I have my library on a external disk to s
-
How is the Login-validation.xml file is called when we do the validation i
Hi ^^, please forgive me if I am a big long while explaining. when you are using the struts 2.0 the web.xml has a welcome-file-list. I have put index.html in that list so it pulls up first. It has the following tag <ul> <li><a href="roseind
-
Hi, I'm trying to alter part of a portfolio that a client is trying to use. The problem lies with the server that the portfolio is trying to connect to, which I assume is used to update the files in said portfolio. It is trying to connect to their
-
Bapi or FM needed to read contract (vendor) data in 4.7 version
Hello Folks, I am working in 4.7 version ... I checked in se37 but couldn't find suitable bapi for reading the contract data(vendor contract).In ecc 6.0 we do have bapi_contract_getdetail bapi for reading the contract data.. I couldn't find any bapi
-
NO_MORE_CMS_HOSTS error in Dashboard
Dear Team, I have created a dashboard on IDT using SQL server and SAP ERP as data sources. Dashboard was running fine but some hours back it started to throw the error. The error appear whenever I query IDT from dashboard or create/modify the connect