I have two Airport Express units. Can I use one to extend the range of the other?

The similar questions that I have found on this site refer to extending an Airport Extreme with an Airport Express. But can you also extend an Airport Express with another Airport Express?

But can you also extend an Airport Express with another Airport Express?
Any Apple "n" router....AirPort Express, AirPort Extreme, or Time Capsule....can be used to extend the signal of another.
Now, we just need to figure out if you have two "n" Expresses that will work together. Are these brand new units?
If not, check the model number on the side of the device. You need to see A1264 there. If you see A1084 or A1088, these models will not qualify as "n" Expresses.

Similar Messages

I have two MacBook Pros. Can I use one Apple ID?

I have two MacBook Pros and I really would like to use just one Apple ID. Can I link my facetime (and imessage) to my phonenumber on both or just on one computer? My phone number is linked to my apple id already and I have it linked to one macbook. I just want to know if I can do that for both.

You can link up to 10 devices and 5 computers with your apple id for iTunes, and one will work for FaceTime or Messages just fine on both of your computers :-)

I have 3 airport express units, an Ipod and a PC. I used the PC to set up an airTunes and the AirUtility can see all three of the airexpresses. The Ipod displays all of the airexpresses and I can pick any one to stream music to. PC won't - any ideas?

I have 3 airport express units, an Ipod and a Windows 7 PC. I used the PC to set up an iTunes/airTunes and the AirUtility can see all three of the expresses. The Ipod displays all of the expresses and I can pick any one to stream music to. The PC won't - any ideas? AirUtility tells me the 7.5.2 version of the firmware is the latest for the expresses and ITunes is also reporting that there are no upgrades available. I get an error code -15000 when I try to connect from the PC to one of the expresses.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

ITunes Automatically Change EQ Setting Based On Which Airport Express Streaming? I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different

I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?

I'm in the same boat. I have a 6 zone amplifier running with 6 airport expresses to different rooms inside and outside the house. Each has it's own acoustic characteristics. I'd really love to be able to set each airport to equalize based on my SPL frequency sweep I did for each room.
Setting the eq in itunes won't do it as that is global plus I have many more sources for auiod other than itunes that use the AEs directly.

At home I have two wifi networks , I try to use one of them depending on their strength of signal, can I not save both their passwords on Apple TV , so that I can switch to one of the two wifi networks as required

At home I have two wifi networks , I try to use one of them depending on their strength of signal, can I not save both their passwords on Apple TV , so that I can switch to one of the two wifi networks as required
Also the passwords are long and cumbersome to type every time on the apple TV remote, what is the alternative if I cannot store them on the memory of the Apple TV

Is it possible that you are using the same password for the old O2 Study and newer O2 Apple Base Station networks?
If so, Keychain Access is storing the old information about the old network and may be associating it with your AirPort Extreme settings based on the BSSID that William has mentioned.
If that's the case, open Macintosh HD > Applications > Utilities > KeyChain Access and look for a listing with the old network name. Delete this entry. You may need to power down both the computer and the AirPort Extreme and restart them.

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15 years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

Hi bookchic
Thanks for your feedback.
Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
Kind regards
Bev

I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

Were you able to reset the account's password ? If not then how did you try to get it reset e.g. http://iforgot.apple.com (which would have sent it to the rescue email address if you have one on that account) ? You can also try contacting iTunes Support in your country to get it reset : http://support.apple.com/kb/HT5699
And no, accounts can't be merged nor content transferred between accounts.

I have two Apple ID, how can I delete one and use the email address associates to the main one?

I have two Apple ID, how can I delete one and use the email address associates to the main one?

If you abandon one of the Apple IDs you will also basically be abandoning any content that you have acquired with that Apple ID. Content can only be updated and re-downloaded with the Apple ID that was used to buy it. Apple will not combine the content of Apple IDs and Apple will not transfer the content from one Apple ID to another Apple ID.

Is it manitory to have an airport antenna or can you use it without the antenna (powermac g5 dual processor 10.4.11)

Is it manitory to have an airport antenna or can you use it without the antenna (powermac g5 dual processor 10.4.11)

On the PowerMac G4 I had it had to be connected, but not sure about the model you have. My guess would be yes due to shielding in the case, but would rather wait and hear from someone else.

I have two airport express base stations that I want to configure on two separate sets of speakers in two separate rooms. How do I do this? Airport Utility only seems to scan one express at a time.

I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

Airport Extreme works fine. Cannot see two Airport express units

Hello. I just bought a new Airport Extreme and 2 Airport express units to replace my old linksys routers and to take advantage of my new MacBook Pro and iTV units. I am a Mac newbie after 20 years of PC's. The Netgear DGND3300 DSL modem feeds DSL signal to the Airport Extreme unit and it works well with good internet and signal. I am trying to use the 2 Airport Express units to extend the signal around the house. The Airport Utility has seen both of them but then they disappear and it cant find them again. They are 10 feet away for now until I get them configured. How do I get them to connect and how do I configure them to extend the wifi range?
Thank you.

The first thing to check is your AirPort Extreme.
Open AirPort Utility - click Manual Setup
Click the Wireless tab/label below the row of icons
Make sure there is a check mark next to "Allow this network to be extended"
Update to save changes
You may have already done this, but it was not mentioned in your post and is a critical step to "extend" the network.
"Hard Reset" each of the AirPort Express devices by holding in the reset button for 10-12 seconds. Then power down one device and configure one at a time.
Open AirPort Utility - Click Manual Setup
Click the Base Station tab/label below the icons
Enter a name for the device, device password and adjust Time Zone settings
Click the Wireless tab
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the AirPort Extreme wireless network
Check mark next to Allow Wireless Clients
Wireless Security = Same security setting as the AirPort Extreme network
Wireless Password = Same password as the AirPort Extreme network
Confirm Password
Update to save settings. Close AirPort Utility immediately as soon as you see the message that the settings have been stored. You should have a green light on the Express in 40-45 seconds.
Now, log back on to the wireless network provided by the AirPort Extreme and you should see the AirPort Express that you just configured, if you are using a Mac. The Windows Firewall or anti-virus software may block the connection if you are using a PC. (The AirPort Express "disappears" as soon as you click Update in AirPort Utility because it has joined another network...that's why you don't see it. It uses a "temporary" network with a name like Apple Network xxxxxs during the configuration only).
Configure the second AirPort Express the same as the first. You will probably want to assign a different device name to that Express to keep things straight.
To "extend" effectively, the Express should be located approximately 1/2 the distance between the AirPort Extreme and the area that needs more wireless coverage. Depending on obstructions, you may need to alter this distance a bit.
The "extend" setup works like the hub and spokes of a wheel. The AirPort Extreme is the "hub" and each Express resides at the end of a "spoke". Each Express communicates directly to the "hub", not to another Express at the end of another spoke. For that reason, you cannot "extend" a device that is already configured to "extend".
Message was edited by: Bob Timmons

Whats the typical range of the airport express? Can I use a single unit for a 3,000sq ft house.

My iPad 2 has serious back light bleeding. What should I do? I think its getting worse too.

To address your subject question: the range of the express could extend over a 3,000 sq ft house if the conditions, placement, etc. are ideal. Plaing the Express in the center, or close to the center, of the house would give the broadest coverage area. But, things like construction material, wiring, other appliances will all have an impact on the signal strength around the house. You would probably be better served using an Extreme since it has significantly more radiated power (23 dBm vs 15 dBm for the Express) and will be able to tolerate the signal attenuation better.
If tow Expresses, then spacing them so each covers about half of the house would be a decent approach. But again, the construction of the house, and interfering equipment have to be considered.

Maximum number of Airport Express Units to be used with Airtunes?

Anyone know the "MAXIMUM" number of ABEs that can be used simultaneously with Airtunes?
And how much bandwith "each" unit would occupy?
I believe the MAX number of Airport Extreme/Express units in a WDS network is 5, would that be the answer? Or could it be more than that if the ABE's were setup as clients?
Thanks.
Jason

I think I remember seeing somewhere that the limit was 3. The problem you run into is that each Express requires its own UDP stream. At 700 megabits per second per Express, it starts chewing up bandwidth rather quickly.

HT1495 I have just purchased a second ipod and have 2 computers can i use one ipod on each computer with the same account. I have a different playlist on my second computer. Thanks,

I have just purchased a second ipod and have two computers w7 and xp, can i use one on each computer with the same account. I have a different playlist on my second computer. Thanks.

Sorry to ask, how do I do it please. I have my first ipod with the same account on both computers that have different libraries one of which I am building now. Do I have to de-authorise my original ipod on the computer that I want to use my new ipod on with the new library and then register my new ipod. I would rather do this than have 2 libraries on one itunes, but keep the same account details.

I have two airport express I cant play both from my Ipad any soutions

I have

Sorry, but there is no current solution for this. For now iOS (iPhone, iPad, & iPod Touch) devices can only stream to one AirPlay device at a time.

I have two Airport Express units. Can I use one to extend the range of the other?

Similar Messages

Maybe you are looking for