I have two intel-era Mac Pros. One at work, another at home. Two months ago both started having same mix of freezes/hangs
I own two Intel-era Mac Pros, one at work, the other at home office. A couple months ago both started having the same problem: a mix of freezes/hangs and weird graphical artifacts showing up on the screens. Usually I need to reboot. Usually a reboot fixes the problem for a while until it recurs. If it was just one computer, I'd figure disk problem or graphics card. But the fact that both have been affected at the same time makes me suspect some software issue or possibly a trojan/virus. Has anyone seen something like this? Or have any advice?
The OS is still @ 10.4.8?
FBDIMMs tend to fail over time due to heat stress and more so if not kept cooler than 70*C
Helps to run SmcFanControl @ 900 rpm - esp in warmer weather
Monitor the system with Hardware Monitor, it is more accurate and thorough though not as "cute" as some.
Both have OEM 7300GT or X1900, which requires constant cleaning of dust.
We aren't mind readers so if you want, then add more details, the System Profile but w/o the serial number.
Maybe you install the same updates and programs and that is why.
Yes you could do a clean install on a fresh drive.
Maybe your drives are years old - and it never hurt to clone the system regularly for backup and maintenance, run Disk Warrior instead or in addition to Disk Utility. And take advantage of new faster drives.
No it may not be Flash based malware but then Apple isn't supporting pre-Snow Leopard as much if at all. They did offer a limited fix for recent malware.
Similar Messages
-
Does anyone have a PA271W, 2010 Mac Pro, and 5870 working via DisplayPort?
Hi All,
There are numerous threads about multi-monitor and resume-from-sleep issues with Mac Pro 2010 (5,1) and ATI 5870. There is also one thread in this forum with another user having problems with DisplayPort (henceforth, "DP") on his PA271W, but he has other issues that point to power supply or some other kind of problem.
My problem is that my brand new Mac Pro won't drive my PA271W at all with a mini-DP to DP cable. The same PA271W will drive fine from the secondary output of my iMac. The same PA271W will also work fine on the Mac Pro with DVI.
Apple sent me a replacement 5870 today, and it exhibits the same behavior. I'm trying to determine which of the following is the case:
a) 2010 MP, ATI 5870, and PA271W are an impossible combination that doesn't work.
b) My 2010 MP has some weird issue that makes the 5870 and PA271W not work.
Unfortunately, I don't have another DP monitor to swap the third variable. I've swapped the second variable courtesy Apple. I'd rather not swap the first variable until I absolutely know that's the problem, because it's a huge hassle to disassemble and reassemble another machine.
Anyone already have this exact configuration working okay?
Thanks,
BenTo answer your question based on what I have seen and inferred so far:
a) I think there's some odd interaction b/w the PA271W, the 5870, and some diagnostic message the 5870 send to the logic board.
b) I don't think this is the case (alternatively ALL 2010 MPs are screwed up!). I was at the Apple store yesterday and tried both a 30" + dual-link miniDP adapter and a 24" miniDP monitors with no issues at all. There's clearly and issue between the PA271W and the 5870, I think.
My PA271W + miniDP/DP cable work fine on both a '09 mac mini and a '09 macbook pro 17". On the mac pro, I cannot boot with it's connected to the miniDP, but it works fine when connected to the DVI port. I can actually connect the PA271W to the miniDP after booting, and this actually works fine, but I'm not going to be doing this every time, too much of a pain.
One important clue (I think): If the mac pro is switched OFF and the PA271W is switched ON, the overcurrent LED light (right next to the CPU) will light up. What this indicates to me is not that there's a power issue (as I originally thought) but that somehow the 5870 is reporting to the mac that something really nasty is connected to it's miniDP connector, and that the mac should not boot.
A poster suggested I disable the DDC/IC on the PA271W. I have the impression this might work (will try tonight). Spectraview can use the USB port for communication with the monitor so I don't think this would be a problem.
Miguel -
My brand new Mac Pro Tower that I spent a small fortune on sometimes boots up and does not connect to the internet when every other computer in my office does and other times it just kicks me straight off. My question is, is there a problem with the wi fi on these machines?
Brand new nMP Mac Pro 6,1 Late 2013.... and it is defective - the older silver tower might be easier to find parts but at least it is not 65 lbs and is something that can be taken in - which I think you really need to do.
When you run etrecheck from www.etresoft.com it can show what is installed, drivers and might help point to something on software side.
Grant is the go-to person here I think among others for networking issues.
Airport Express and signal strength, channel it is trying to use, whether the Network control panel settings are "correct" or need to be changed (even the order, what it is trying to look for and use).
If you move it to another spot or put another computer over in that general vicinity...? behaves the same.
I recall reading where the MacBook Pro model in 2012? and switched to a new chipset and some very long (huge) threads in their forum - which means also there was no real solution given.
No, should not be. And other than network tests would be booting into Apple DiagnosticsTest mode - pulls down from Apple servers.
http://support.apple.com/kb/HT5781 -
I have a late 2008 Mac Pro Quad Core 2x2.8 Intel Xeon with Lion 10.7.5… do I need Maverick and will this hardware support the Airplay Mirroring?
It doesn't mention anything about a Mac Pro. So no.
http://support.apple.com/kb/HT5404
If your computer did support it, you would still need 10.8 or 10.9 for Airplay to work. -
I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?
RE: SATA Bus speed:
Typical Rotating drives available today, whatever their SATA spec, can source data off the spinning platters no faster than about 125MBytes/sec.
SATA 3 is rated at 6G bits/sec, which theoretically is about 750 Mega Bytes/sec
SATA 2 is rated at 3G bits/sec, which is theoretically about 375 Mega Bytes/sec
SATA 1 is rated at 1.5G bits/sec, which is theoretically about 187.5 Meg Bytes/sec
None of the SATA Busses is a bottleneck for consumer Rotating drives you can buy today. Trying to speed up the SATA Bus will not provide any real-world performance increases for Rotating Drives.
https://discussions.apple.com/message/22690384 -
Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
RobertWhen you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
I have an older model Mac Pro that isn't WIFI: how do I update it?
I have an older model of Mac Pro — the MacPro 1,1 — that isn’t wifi capable.a wifi network.
How do I update it to a connect it wirelessly to my router?
Would a PCIe card work? If so, what would be the best sort?Should I, instead, get the relevant Airport base station?
Any help would be appreciatedSince the early Intel-based Mac Pro tower was available in a heavily customized version
with many extras as a BTO, and also lesser optioned models, the parts may be harder
to come by now after this passage of time, than when the MacPro1.1 first arrived.
Wi-Fi: Optional AirPort Extreme card (802.11a/b/g/n)
Bluetooth: Optional Bluetooth 2.0 + EDR
Modem: Optional Apple USB Modem (MA034Z/A)
Fibre Channel: Optional (MA462G/A, MA465G/A)
Internal RAID: Optional Mac Pro RAID Card with 256 MB cache & 72-hour cache battery backup
An internal Wi-Fi or BT component likely had an external antenna such as the last model
PowerMac G5 with a similar all-metal aluminum case, as that does resist radio waves...
The answer for issues with last model PPC G5 aluminum, was an external antenna.
Not sure what model or part numbers were involved in any of the BTO or dealer installed options.
So if you use an expansion card idea, note the metal case of the early MacPro may block it.
You could use an Apple Express, and use it via Ethernet cable, to extend a network to MacPro.
PS: The two linked PCI card adapters are not familiar to me, nor are the complexities of this
series of early MacPro; other than they do have similar issues with wireless due to metal case.
Good luck & happy computing!
edited -
Migrating FCE 2 on G4 powerbook to FCE 4 on Intel iMac/Mac Pro: Questions
I am interested in migrating from FCE 2 on G4 powerbook (1.6ghz) to FCE 4 on Intel iMac/Mac Pro (have to decide which). I have two main questions:
Will my FCE2 projects, sequences, scratch files etc. (currently on external hard drive) open ok on the Intel based FCE4 system?
How much of a performance boost can I reasonably expect after this migration (for example renderings)?
Thank you in advance.Thank you both for replying. Just in case anyone else is wondering about the second part of my question (speed of FCE on 1.6GHz Powerbook G4 vs an Intel iMac), I tested this out this weekend at the local Apple store. I took a 12 second clip on different computers and timed how long it took to render a contrast/brightness change. Here are the results:
7 sec. iMac
6 sec. Mac Pro
9 sec. Macbook Pro
30 sec. My old G4 Powerbook
So a 4-5 x bump! Impressive! Although its interesting that the mac pro isn't radically better than the imac. -
Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?
It is a hard one.. laptops with small drives are a pain.
What you need is a home media server.
Some people use a PC running itunes for cost.. but that is nothing like as good as using a Mac mini.. they make great little HTPC device.. you can plug in large hard disks and store all your files and media. And share it with the network.. Read up apple's instructions on home sharing.
https://www.apple.com/au/support/homesharing/
For cost you can buy a mini from 2011 or 2012.. I would not recommend earlier ones.. the advantage of 2012 is they have USB3 ports. But you will pay more for them.. new mini is not as useful.. they have soldered in memory and you cannot upgrade.. the old mini was the most easily modified mac in the whole range. Uses little power and can be bought for a $300US for a good one second hand.. maybe less. -
I am unable to update my apps... in my purchases page it appears as "update", then a message tells me to log on with the Apple ID I purchased the app with... Well I have tried my two different accounts and neither one will work, can someone help ??
And is there any way to sync all my purchases and accounts to just have one... It is a bit stupid that you dont even get a list of something of what account you may of used, or some kind of hint, so you could log on to the right account. I am really stuck ...
Please Advise......You can't merge accounts. But you can check your purchase history:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, what may seem stupid to you... may be a protection of privacy to others. -
I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion?
I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion? On the Apple's site on upgrading (http://www.apple.com/osx/how-to-upgrade/), I see that "Mac Pro (Early 2008 or newer)" is required for the upgrade. What's up with that?
Will upgrading of the GPU do the trick?
I'm curretly on Snow Leopard, will I be limited to Lion?
Kamal
my system info:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 13 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Serial Number (system): xxxxxxxxxxxxxxxxxxxxxx
Hardware UUID: 00000000-0000-1000-8000-00xxxxxxxx
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140I have the following Mac Pro which I have upgraded the GPU to an ATI Radeon HD 5770:
Hardware Overview:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 3 GHz
Number of Processors: 2
Total Number of Cores: 4
L2 Cache (per Processor): 4 MB
Memory: 8 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version (system): 1.7f10
Serial Number (system): G86334VTUPZ
Hardware UUID: 00000000-0000-1000-8000-0017F20153D2
Mountain Lion won't install.
Will this change or do I need to further upgrade the GPU.
Thanks In Advance!
--Dave K. -
HT1338 Can I upgrade my Intel Xeon MAC PRO running OS X 10.4.11 to 10.5.8?
Can I upgrade my Intel Xeon MAC PRO running OS X 10.4.11 to 10.5.8?
Yes. You can actually upgrade it all the way to Lion should you so wish, although you would need to first purchase and install Snow Leopard 10.6.8.
I would skip Leopard as it's more expensive and obsolete. You can purchase a Snow Leopard DVD at any Apple retailer - $29.00. You can update it by downloading Mac OS X 10.6.8 Update Combo v1.1. The use the App Store to purchase and download Lion should you choose to do so - $30.00.
I would consider expanding your RAM to at least 4 GBs or more especially if you decide to upgrade to Lion. Before upgrading see the following:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
I have Mac Pro with Keynote and other essentials installed. How can I download the same on my IPAD without paying to download.
Try downloading them onto the iPad normally. If you're asked to pay for them, you can't.
The developer needs to create the two versions separately.
(116544) -
My problem concerns migrating, or moving my iTunes files from a Motorola-based G4 PowerMac OS X 10.4.11 iTunes 9.2.1 (4) to a new Intel-based Mac Pro running OS X 10.8.4 iTunes 11.0.4.
Context Summary:
1. Migration assistants on my old and new macs are not compatible.
2. My older mac has my iTunes library stored on an external firewire disk.
3. Part (but not all) of my iTunes files are also resident/stored on my iPod classic.
4. Finally, I need OS X 10.4.11 on my old mac and cannot upgrade it to OS X10.5.
Proposed method A: Is there a way to transfer my playlists from my Motorola Mac to my Intel Mac? If so, could I then connect my external firewire disk (containing my iTunes library) to my new mac, and then tell iTunes (on new mac) to use my iTunes library located on my external firewire disk?
Proposed method B: Would my chances for success improve if I used my iPod classic to transfer iTunes files from old Mac to new?
Worst Case Proposal C: I could start from scratch and recreate iTunes playlists and library on new mac.... time consuming proposal but it's possible. (Please don't suggest this proposal unless no other viable choices exist for me.)
Or have I missed something? Is there another procedure I should use?
Please advise, and thank you.Hello Chris,
Answer to your iTunes library question: By iTunes Library, I mean my iTunes Media folder only; not the entire /iTunes/folder with iTunes media folder inside.
BTW: Your pointer to ht4889 was very helpful, and sharing the folder, then copying it over firewire interface from old to new mac was most useful.
However, now with my entire iTunes folder (including iTunes media folder) moved to new mac, I remain unclear as to how I should configure iTunes on the new mac so that it can know about and use these copied files. I understand using iTunes preferences, how to point iTunes to my media folder, but don't know what other iTunes operations are necessary for iTunes to pick up where I left off with my old mac.
Is there any file conversion necessary?
Or inside iTunes, should I:
File->Library->Organize Library? or
File->Library->Export Library? or
File->Library->Import Playlist?
Please advise and thank you again for your help.
As you might imagine, I put a great deal of time building my iTunes library, and would feel very blue if I need to build it again from scratch on my new mac.
So long for now. -
I have a mac pro i bought in 2008. I keep getting prompted my start up disk is full. I have delted many files, however I'm still getting the prompt
Then your hard drive is full. You need to move large libraries to another location (like an external drive). Libraries like iPhoto, iTunes, and even iMovie Events, are very big space hogs.
iPhoto
Moving iPhoto Library - http://support.apple.com/kb/HT1229. and http://support.apple.com/kb/PH2506.
iTunes
Moving iTunes Music from one computer to another or an external drive - http://docs.info.apple.com/article.html?path=iTunesMac/8.2/en/15475.html and HT1449 - http://support.apple.com/kb/ht1449
iMovie
Moving iMovie Events to an external drive to save space see the following 2 articles:
PH2302 - How to move "Events Only" to an external hard drive - http://support.apple.com/kb/PH2302?viewlocale=en_US.
PH2289 - How to move "Projects" (and their associated events) to an external drive - http://support.apple.com/kb/PH2289?viewlocale=en_US&locale=en_US.
Also note, you can save space on your hard drive by deleting "Excess" unused video in your event folder - see the iMovie 11 help menu, and select the "browse help" tab. Under Manage Events, select "Delete all excess video from an event"
NOTE - ensure you are "Moving" the data, and not just "Copying" the data as per - http://support.apple.com/kb/PH2302?viewlocale=en_US. (hold down COMMAND while dragging to the external drive) for the best results and less chance of loosing data connection with the project
Maybe you are looking for
-
HT4157 My iPad doesn't show cellular data under settings
I look at the network settings and don't see cellular data option. It's available on my old iPad.
-
What has happened to firefox in the last few months? It takes forever to load pages if at all.
Pages slow to load if at all. Navigation using forward and back arrows works intermitently ie. pages get stuck. For the past four years I have only used Firefox as it was far superior to IE or Google Chrome. Now I am using the latter two as they work
-
Cant use icloud when multiple versions of outlook are installed
MS states its a apple problem with there software,can you help me?
-
Since installing Panther 3.9 FCP3 can't locate firewire device and quits on command 8. Do I have to upgrade to fcp4 or is there a work around? Thanks
-
My old Apple ID keeps popping up
My old Apple ID keeps popping up, and when I check it through apple login it is not found how do I get rid of it