I have uninstalled and reinstalled iTunes multiple times. When I connect my iPod Classic I get the following message: The software for this iPod is not installed correctly. Please reinstall iTunes to install the required software. Any ideas?
I have uninstalled and reinstalled iTunes multiple times. When I connect my iPod Classic I get the following message: The software for this iPod is not installed correctly. Please reinstall iTunes to install the required software. Any ideas?
Assuming you have windows, try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.
Similar Messages
-
I keep having the message the software required for communicating with your ipad is not installed correctly please reinstall, I've uninstalled and reinstalled the latest version of itunes 8 times and no luck does anyone have any advice?
First, for the forum view issue. Go to My Settings (on the right) and in General Settings change the Topic Page View to Flat. Click Save. Posts should show up in the order they were written.
Have you seen this?
http://docs.info.apple.com/article.html?artnum=93764
Also, since you said that you've gone through the 5 Rs, I would assume that you used the iPod Updater to restore (since there is no other way of doing it and you don't "run" the 5 Rs).
When you restored, did you use the latest updater?
You may also want to try formatting the iPod through Windows. Connect it to the computer and when it appears in My Computer right click it and go to format. Does anything happen? Can you format the iPod through Windows?
btabz -
My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 2010 and I have since misplaced the disk.
How do I fix the problem?Hi Ali,
You can download Acrobat 9 Std. from: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
and reinstall the software.
Regards,
Rave -
Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.
Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
updated itunes and now get the following message.
this copy of itunes is corrupted or not installed correctly. please reinstall
what has caused this?
in my downloads folder i have itunes64Setup.exe do I just run this ?
or will this overwrite my existing data and I'll have to set up my library from scratch.
as its an ipod classic with 120 Gb of data i'd rather not have to set it up all againHello barbeedawg,
Thanks for using Apple Support Communities.
I'd like you to please follow the steps in the article below to first remove all instances of iTunes and its associated files, and then reinstall iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Take care,
Alex H. -
When I want to syncronize my photo's from my computer to my Ipad, I get the message "itunes photoprocessor was not installed correctly, please reinstall itunes, error 7"
When I did so, the same message appears again and again.
Anyone knows the solution?
Thanks on forhand.Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
I've got myself a new iphone 5s and I tried to update itunes. Now its telling me that this copy of itunes is corrupted or is not installed correctly Please reinstall itunes.I'm not good with computers so any help would be great.I'm scared if i reinstall i will lose everythig.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
i dont know what to do i try install itunes and this keeps coming up "itunes was not installed correctly. please reinstall itunes error 7 (windows error 127)" what should i do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
when I install the program, all go good but when i open the program, it say: iTunes was not installed correctly, Please reinstall Itunes Error 7 (windows 193), After i do this but the same
Howdy Allux345.
After multiple installations of iTunes it can be frustrating when the issue isnt resolved. I was able to locate the following knowledge base article that specifically addresses the "Error 7" you are recieving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
The Resolution section has different steps depending on what version of the Windows Operating System you're using. Since it can be a bad installation of these Windows files, pay close attention to the instructions on repairing if the file already exhists.
Thanks for reaching out to Apple Support Communities with your question.
Cheers,
Pedro D. -
Ituneshelper was not installed correctly, please reinstall itunes
trying to install itunes i have unstalled adn reinstalled several times but keep getting this message when i try to open itunes
ituneshelper was not installed correctly, please reinstall itunes
error 7
please helpituneshelper was not installed correctly, please reinstall itunes
error 7
The error 7 suggests you might also be getting a problem with your Apple Application Support as well as iTunes.
So let's try uninstalling both iTunes and Apple Application Suppport this time. When we reinstall iTunes, that should reinstall Apple Application Support as well. We'll take a few additional explicit precautions along the way too. Best to print these instructions out, because at one stage of proceedings you won't be able to use a web browser.
Preliminaries
Download and save a fresh iTunes installer to your hard drive. (Don't run the install on line and don't start the iTunes install just yet.)
http://www.apple.com/itunes/download/
Now, quit QuickTime (if you have that open) and Safari 4.0.4 (if you have that installed and open). Both applications use Apple Application Support, and they will interfere with the uninstall if you have them open.
*Uninstall phase*
Head into your "Uninstall a Program" control panel. Uninstall iTunes. Uninstall Apple Application Support.
(From this point on until we reinstall Apple Application Support, neither QuickTime nor Safari 4.0.4 will be able to run.)
Next we'll remove any leftover program files and folders.
(1) Open "Local Disk (C:)" or whichever drive your program files are stored on.
(2) Open the "Program Files" folder.
(3) Right-click on the iTunes folder (if it still exists) and select "Delete".
(4) Open the "Common files" folder.
(5) Open the "Apple" folder.
(6) Right-click on the Apple Application Support folder (if it still exists) and select "Delete".
Now empty your Recycle Bin and restart the PC.
*Reinstall Phase*
After the PC restarts, do not open any other applications. Disconnect from your network and/or the internet. Switch off all your security software (firewall, antivirus and antispyware).
Now start the install by doubleclicking the iTunesSetup.exe file you downloaded earlier.
Reenable all security software prior to reconnecting to your network and/or the internet.
Did the install seem to go through okay? If so, does iTunes start launching properly again? -
Itunes was not installed correctly please reinstall. :(
After upgrading itunes it says ' itunes was not installed corectly please reinstall so i uninstalled everything apple : bonjour apple application support , quicktime ....., than installed itunes again nothing ! same message i'v tried dowload microsoft.net framework didden't help. I noticed that quicktime isent working either it says ' please install apple aplication support so i downloaded winrar opened the setup from itunes and installed apple aplication support . Now after a week itunes still says ' itunes was not installed correctly please reinstall and quicktime still says ' please install apple aplication support. I'm 14 and from Belgium so i don't understand the really complicated told selutions but i do understand if you could explain it in steps ! please help me my ipod was conected to my pc when this all happend so it deledet all my music on my ipod please please please help me !
After searching on line, it seemed that this was a compatibility issue, and I might need .NET 3.5, which in turn seems to be part of SP2, but my autodownloads failed and the patch for downloading SP2 failed to install also.
Yeah, that'll be our issue. We'd better get you up to SP2 ... without it, you won't be getting any security updates now, so you'll possibly be a wee way behind on that front. (In the grand scheme of things, that's probably the more significant problem.)
Are you able to get SP2 in if you do a manual download of the System readiness tool? There's instructions for that in the Information for Advanced Users section of the following document:
[Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2|http://support.microsoft.com/kb/947821] -
After atempting to update to iTunes 11.something (.3 or .4 which I had been avoiding because of past experiences) I get this message when I try & open iTuunes. ITunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 193). I have attempted to download iTunes several times. What can I do?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
have windows 7 ... itunes worked on my computer before ... but when I tried to download new version of itune ... I get this message ; This copy of itunes is corrupted or not installed correctly. please reinstall itunes (-42404) ... this has been happening for about two to three months now ...
Hello barbeedawg,
Thanks for using Apple Support Communities.
I'd like you to please follow the steps in the article below to first remove all instances of iTunes and its associated files, and then reinstall iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Take care,
Alex H. -
I get error message saying itunes is corrupted or not installed correctly please reinstall itunes --- wondering what this means and if needed how to reinstall itunes
Click here and follow the instructions.
(83117) -
Itunes was not installed correctly. please reinstall itunes. error 7 (windows error 126) av founda
Help me
itunes was not installed correctly. please reinstall itunes. error 7 (windows error 126).
AV foundation cf.dll
windows 7
tksSee Troubleshooting issues with iTunes for Windows updates.
tt2
Maybe you are looking for
-
Business Object Method is not Visible
Hi Experts, I have created a custom business object and created a method for it in t-code SWO1. I am trying to use this object's method in one of workflow tasks. I entered the business object and I do not find the method in the method's list. I relea
-
Hi experts, I have the following message: I do not understand why? very thanks,
-
Problem regarding BAPI call from a webdynpro applications
Hi, We are trying to call a BAPI in R/3 system from a webdynpro application through the standard method. But we are getting some problems in JCO settings. We already wasted so much time in solving those problems. Is there anyway where i can access
-
Hi guys, I'm definitely a Flash noob and would really appreciate some guidance with a few things: I'm making videos for an instructional program. This involves importing audio, images, animating those images, etc. I'll be exporting to flv format at t
-
I have an early iMac G5 with the Powerpc processor, therefore the new Snow Leopard cannot be used. Some of my videos (.avi) will only play with sound and no video. I am trying to find a codec which will work. All that I have seen and tried (i.e DivX