I have updated ipad3 to ios7 and now battery drains very fast even when not in use
Why is my battery draining so fast even when I'm not using it . last night I put it down with 45% and woke up to dead battery. I upgraded to ios7 last week. I have ipad 3.thanks
Hi!
I have an iPad 3,3 GSM. I didn't update it since iOS 5.1.1. iPad works almost a week for me. And updated it to 7.1 at last Friday.
After update my battery drains notable fast. ~10-12% overnight(~8h) in standby mode. I've tried to turn off parallax, all location services and background apps. But nothing's changed.
So I''ve found that in usage section I ve almost the same values of usage and standby time. And I realized that one thing that drains my battery is "Find my ipad" service!!! I turned off it and my ipad works as with iOS 5.1.1:
2% overnight max!! And now it's drained only 14% after 4h20m of usage with parallax turned on! (yes i've only surfed web and read a book but nevertheless)
So it's your choice what to prefer - be sure that your ipad either protected from stealing or long battery life!
Similar Messages
-
I dropped my iPhone 5s on the floor on accident. Of course I have a otter box on it, but when i picked it up, the rear camera stopped working. Also the area around the rear camera started to overheat. I was so hot that it you touch it it will burn you. The battery also started to drain very fast.
You broke it. That seems pretty obvious. A case, including the otter box, is not a magical force field that can protect your phone from the force of gravity.
make an appointment at the genius bar. An out of warranty replacement will cost you $269. -
Hi,
my Q10 now got very slow after the update to 10.2.1.537
It takes ages for switching from e.g. text to E-Mail Inboxes, from Hub to oriority Hub view or just to opening an email or an app. Also, it s draining the batterry very fast. Down to 20% after only 3 hrs , and than it is switching off. Even in Aircraft mode the battery is down after 5 hrs without me even touching the device.
Any clue what went wrong?I am also experiencing all kinds of problems since the 10.2.1.537 upgrade. I now have to reboot my Q10 constantly as it will just freeze intermittently! After making a call I sometimes have to wait 5 minutes+ untill I can make another call. My battery also drains very fast - I have to charge it everyday.
-
I have a IPhone 5 thats having screen separation and my battery drains very fast
I have a Iphone 5 that was kept in a otter box when I noticed my phone wasnt holding charge as long. I removed the case to see that the screen was separating from the body and as of now the phone wont turn on at all.
Take the device to Apple for evaluation.
-
Pl. help me to figure out the resaon for this.
Hi eyen83,
Welcome to the Support Communities!
If you're not able to make calls on your iPhone, try these troubleshooting steps first:
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Follow the steps below to resolve this issue. Please test after each step.
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Cheers,
- Judy -
When i plug in my ipod to the comp it wont charge even if i keep it plugged in for an hour but it heats up like crazy i have also got the temperature warning once , it charges only once in a while and and my ipod nano works fine when i plug it into my comp so please help
Try here:
iPod touch: Hardware troubleshooting
However, from yur symptoms Isuspect a hardware probblem like a dead battery. An appointment at the Genius Bar of an Apple store might be in order. -
Should I take it to the apple store?
Try these steps as needed.
1. Reset iPhone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
2. Restore in iTunes using a backup (no data loss)
3. Restore in iTunes as new (without using a backup)
Backing Up, updating, and restoring your iPhone and iPod touch software -
My iphone 4 upgraded to ios6.1.2 and the battery drained very fast.
ios6.1.1 seemed much better than 6.1.2. The new version is a disaster for battery.
Did you perform the upgrade by plugging in your phone and upgrading through iTunes? I had the exact same issue happen before because I did the upgrade through WiFi. I spoke to an Apple representative and they said that upgrading over WiFi can sometimes cause this issue. To check if you had the same problem as me, go to Settings, General, Usage, and scroll to the bottom. Look at the section called "Time since last full charge" and you'll see "Usage" and "Standby". If those two numbers are equal, they shouldn't be unless you are constantly using your phone...
Unfortunately, the only way to fix this issue is to restore your iPhone via iTunes (if you have the problem I described). However, you you back up your phone prior to restoring it, you should not lose any of your data, but all of your settings will be reset to default.
I hope this helps. -
My iPad is a few years old but the battery is running down very quickly, is there anything I can do ?
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I've just updated my Itunes to the newest update (iso7 I think) and now my itunes won't even open. It just jumps 2-3 times on my dock then doesn't open. I have no idea what to do , please help!
Open Finder. Go to the "Go" menu in the menu bar. Press and hold Control and click on Library. Go to "Preferences". Find a file named, "com.apple.iTunes.plist" and delete that file. This won't delete your iTunes content. It will reset iTunes. Try it again.
-
I have updated my iPad mini and now when I view videos I cannot zoom or pan around like before
Quit the mail app and reset your iPad like this:
Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
I have updated to iTunes 10 and now my unchecked songs are playing... I don't want this and can't figure out how to have it like it was before (not playing unchecked songs). Please help! I leave the unchecked songs in there b/c there will come a point in time where I want to listen to these songs but right now I don't.
yes, 10.3.1, iTunes already restarted, menu settings already like that and still it will play all unchecked songs (including the checked songs of course). Why even have check and unchecked if the program is going to play all of them anyway?!
thanks for responding though... -
I updated my iphone tonight and now my texting is crazy. When I text my daughter, the text comes to my iphone.
Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden -
i downloaded the new 7 update on my ipad. it now will not charge to 100% and loses power even when not in use. any solutions ??
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Then plug it in and let it fully charge. -
Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
Maybe you are looking for
-
I just upgraded to 10.10. On the mail program, one of my accounts is having an issue sending email. I am getting the following error message: The certificate for this server is invalid. Select a different outgoing mail server from the list below or
-
Hello sir, i want to bye a nokia phone where i can minimize application, phone may be bar or qwerty but not touch screen, please give me best suggestio far a phone within 10,000. Thanks
-
Third Party Sales order showing billing satus as Partially Invoiced
Dear GURUs In Thirdparty sales scenario I checked the VBUP table for FKSAA field its showing status as B while delivery invoice all has been done in full(not partial).I checked the item category it has given bIlling relevance as G(should have been F)
-
How can I add option to embedded OC4J, so it will take the xml parser I specified. example as following. -Dorg.xml.sax.driver=oracle.xml.parser.v2.SAXParser Where I can setup in Jdeveloper? or is some property files?
-
LBACSYS account not present on 11.2.0.3
I installed OLS , VPD and Advanced Security ( its installed default anyway) and I verified using runInstaller that they are installed. But when checking the user presence, i dont see the account, and furthermore, SQL> SELECT VALUE FROM V$OPTION WHERE