I have updated my Adobe elements 11. Both picture and movies. I have installed elements 13 do I uninstall my two older programs
I have updated my Adobe elements 11. Both picture and movies. I have installed elements 13 do I uninstall my two older programs
Not unless you want to. Each version is a separate standalone version and you can keep both if you like.
Similar Messages
-
I have an IPhone 4S. All my color pictures and icons turned to looking like a negative. No color! How do I get the color back on my phone?
Hi ladwwd56,
Welcome to the Support Communities!
Is it possible that you may have an Accessibility feature called "White on Black" turned on?
See page 244 of the iPhone User Guide PDF:
http://manuals.info.apple.com/MANUALS/1000/MA1539/en_US/iPhone_iOS4_User_Guide.p df
White on Black
Use White on Black to invert the colors on the iPhone screen, which may make it easier to read the screen. When White on Black is turned on, the screen looks like a photographic negative.
Invert the screen’s colors: In Settings, choose General > Accessibility and tap the “White on Black” switch.
If that is not the case, try restarting / resetting the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Happy New Year!
- Judy -
After updating to IOS 6, I cannot update apps, it produces a MSG you cannot use your ID in the US store. my apple store is in Greece how can I change this from iPhone/ IPad?
I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming. So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on. But the ipad is a different story. I have the music and artist but not one playlist I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this.
Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z. Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac. Which I do talk highly of all the time. But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
I have managed to get the Imac to fix this but for some reason the IOS devices do not. Any ideas?
Thanks Al -
Can't open canon g16 raw files. I have updated to Adobe camera raw 8.2 and am working with PS CS6.
Here is my issue, I can't open the Raw files from my new Canon G16. I have run all the Photoshop updates and even installed the Camera raw 8.2 update but still cannot open my raw files. The will open in Canons digital photo professional program so I know they are not broken files. I have even installed the DNG converter and they will not even open with that. What am I doing wrong? I bought this camera specifically for the ability to shoot in raw. My canon 60d raw files work fine.
Why on Earth did you upgrade only to ACR 8.2 ?
The current version of ACR is ACR 8.4. You should ALWAYS update to the latest version. Once a camera model is supported, it will be supported in all subsequent releases of ACR.
Beside new camera support, each ACR update contains any number of unannounced, unheralded bug fixes, improvements and enhancements.
What is the exact version of your OS and of your Photoshop CS6? For instance, if you're on a Mac, you should be running Photoshop CS6 13.0.6. I can't remember offhand what the latest version for CS6 is.
Did you install ACR correctly. ACR 8.2 should work for your camera (but update ACR anyway). What version shows up when yo go to About Plug-in… > Camera Raw.
You of course need to relaunch Photoshop, maybe even reboot your machine, and then Purge the Cache in Bridge.
Next time you ask a question, please give sensible, complete and detailed information from the beginning:
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.
Sometimes the Adobe servers used for the updates can get busy and it’s necessary to try a couple of times. Also make sure you don’t have a firewall which may be blocking the connection. It sometimes helps to temporarily disable internet security/anti-virus software. Because the Organizer is shared by both programs it often helps to do the PSE update first, followed by the PRE update in that order.
Select the 12.1 update for PSE from the updater dialog and ensure everything else is unchecked. Quit PSE and PRE if you have it running and then start the update.
If PSE updates properly to 12.1 repeat the process for PRE. -
Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.
Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.
-
I have updated to 8.1 on both my ipad and iphone 5. I am missing photos...they display as blank boxes. What should I do next?
Apps downloaded on one should also appear on the other as long as the app in question runs on both iPads and iPhones.
-
I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.
No Apple response??? Redplum/Valassis will not help either. I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum. What a pain to do anything with my Mac or find any help. I honestly regret buying this buggy OS.
Anyway, here is what I found, FYI:
http://ubuntuforums.org/showthread.php?t=483415
As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
- altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
- copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
..everything started working.
It's still slower than windows, but I can live with that
Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer broken pipe problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.
Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
Posted on November 25, 2008
Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
sudo gedit /var/log/cups/error_log
If you see anything like the following, the solution may be simple:
[Job 201] Unable to write print data: Broken pipe
PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
http://ubuntuforums.org/showthread.php?t=483415 -
i have updated version of Mozilla Firefox 25.0 And adobe flash Player also latest version but every time adobe crush what to do
This is some standard guidance that addresses the most common issues with the Flash Player plugin. I'm sure you've seen some of it before, but just in case:
(1) If you have any recorders/downloaders that interact with Flash media make sure they are as up-to-date as possible, or disable them temporarily.
(2) Disable hardware graphics acceleration in Firefox and in Flash
(A) In Firefox, un-check the box here and restart:
orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable protected mode (Windows Vista and higher)
See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
Any luck? -
I have updated my adobe digital editions but application not recognizing it, can't open epub book
I have updated my adobe digital editions but application not recognizing it, can't open epub book
What Adobe Digital app on your iPad? If you are talking about a third-party app (like Bluefire Reader) you need to connect your iPad to your computer, open iTunes, select the iPad, and select Apps in the Sidebar. Scroll down to the File Sharing section, select the app you plan on using, select Add (bottom right), navigate to where the book is on your computer, select the book and sync your iPad.
-
I have updated my Mac to Yosemite operating system and now I cannot open my Adobe Creative Suite applications. What can I do?
What a waste of space to paste the code.
Why not ask in the iLife > iPhoto forum where your question belongs. -
I have set up iPhoto 11 so that pictures will be edited in Photoshop elements 11. I selected the option to edit in another application. But when I select edit in iPhoto, elements opens but the photo does not open in elements. I'm using a Macbook pro 15 inch with retina display with OS 10.8.4 What is the problem?
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/
It relates to Elements 10, but it's the same for 11. -
Hi. I have updated my computer to Windows 8.1 and now suddenly my Apple TV can not find the computer, it says "turn on the home sharing". Both of these are on, iTunes and Apple TV, what to do? It was working perfect before update.
Thanks in advance.Make sure the firewall and wifi router is not blocking it you can likely see if its the wifi router by connecting by etherent cable that would mean itsopen in terms of ports
-
Updated 2.3.3 for both x10i and x10a (ALL KITS)
Updated 2.3.3 for both x10i and x10a (ALL KITS)
http://www.topsony.com/forum/local_links.php?catid=4556
download FlashTool
http://forum.xda-developers.com/showthread.php?t=920746
or
http://androxyde.github.com/Flashtool/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
Solved!
Go to Solution.this is how to add more Internal Memory it's a long process but its worth it
1) backup everything (Check above)
2) backup your SD card
on your PC
1) open any folder -> click on tools -> properties -> view -> show hidden files
2) mount the SD card, go to your SD card, press Ctrl + A then Ctrl C, on your desktop create a new folder, open it, then press CTRL + V
now this is where it gets AWEOME-ER
Guide to using Link2SD on your Xperia smartphone
This guide may seem lengthy, but trust us when we say it is straightforward. All steps have been documented which makes it look daunting. Read each section carefully and follow the steps outlined to install Link2SD.
1. PREPARATION
Please make sure you have completed all of the following before starting the tutorial.
On your PC:
– Install the necessary drivers for your Xperia smartphone onto your PC/laptop. The easiest way to do this is to ensure that Sony Ericsson PC Companion is installed on your PC. Once installed, connect your phone to complete the process.
– Download and install MiniTool Partition Wizard onto your PC or laptop.
On your Xperia:
– Enable USB de-bugging mode: Setting –> Applications –> Development –> Tick ‘USB debugging’
– Enable the ability to install unknown apps: Setting –> Applications –> Tick ‘Unknown sources’
– Install Link2SD from Android Market onto your Xperia smartphone. It is a free download.
2. ROOT
3. BACKUP MEMORY CARD
As we will be creating a partition on your microSD memory card, make sure you create a backup just in case anything goes wrong.
a) Create a new folder on your PC and name it anything you want, such as ‘SD_Backup’
b) Connect your phone to the PC, navigate to your memory card and copy the contents to the backup folder.
4. CREATE SECONDARY PARTITION
You now need to create a secondary partition on your microSD memory card that will enable you to use Link2SD.
Note: We will use MiniTool Partition Wizard to create a secondary partition on your microSD card. This partition can be ext2, ext3, ext4 or FAT32. We will use FAT32 as it is supported on all phones and should lead to less troubleshooting later. You can use any partition manager of your choosing, but the steps below guide you through MiniTool Partition Wizard.
There is no need to wipe your memory card when going through this process, just ensure you have at least 0.5GB to 1.0GB of free space to make it worthwhile. You also do not need to use a microSD card adaptor as the process below creates the partition whilst the phone is connected to your PC.
a) Connect your handset to the PC via USB and then launch MiniTool. You should see the details pop up under ‘Disk 2′.
b) Click on the memory card under Disk 2 in MiniTool and then in the left pane, press ‘Move/Resize Partition’. On the blue bar under ‘Size and Location’, move the right arrow towards the left to create the size of the secondary partition desired. In the example below we created a secondary partition with 1018.63MB of space. This value can also be typed in manually in ‘Unallocate Space After’.
c) Once this is done you should see that your memory card is now split into two partitions under Disk 2 of MiniTool. Right click this new partition and then press ‘Create’.
If you see this pop-up below, just press ‘Yes’ to continue.
d) You should then see this ‘Create New Partition’ window. Under ‘Create As’ click Primary and then under ‘File System’ click FAT32. Leave the cluster size as default and you can assign whichever drive letter you want. Once finished press OK.
e) This should bring you back to the main MiniTool screen. Now hit the ‘Apply’ button on the top-left of the screen, denoted by a tick symbol.
This will bring up another pop-up window and will take several minutes to both resize and create the secondary partition.
If successful, you should see message below. Congratulations your card is ready to use in conjunction with Link2SD.
5. LINK2SD
This application makes it easy for users with root privileges on their phone to move applications to the SD card.
a) Open the Link2SD app on your phone. You should be greeted with the following menu, check the FAT32 option and click OK.
You will then see the Superuser Request, click ‘Allow’.
Once you see the following message, restart your phone. The app should now be ready to use.
b) To make sure everything is installed correctly. Click the Menu button and go to ‘Storage Info’. This will show you the internal memory and your two partitions on the memory card. In our case, you can see that the second partition has 1GB free.
c) Now you need to move the apps of your choice to the memory card. Click the Menu button and press ‘Multi-select’.
Choose which apps you want to move by clicking the tick box next to the app. System apps are greyed out and cannot be selected. Link2SD can only move apps that are already on the internal memory. If you have apps already on your SD card, you will need to move them back to the internal memory before you can link them with Link2SD.
If you want to move all of your apps, pressing the menu button will bring up another menu allowing you to do this.
d) Once you have chosen which apps you want to move, you then need to hit the menu button and press ‘Actions’, which will bring up the following menu. Press ‘Create Link’.
Leave all three check boxes ticked and press OK. Link2SD will now do its work and move/link the selected apps to your memory card.
Once finished, you should see that the apps you have moved have ‘Linked -> SD Card’ in red font in the Link2SD app list. Reboot your phone.
e) Congratulations your phone is now using Link2SD! You should now go to Settings by pressing the menu button and configure how you would like Link2SD to work. The main decision here is whether you want to Auto Link newly installed apps to the memory card. Given that you’ve gone through the hassle of installing Link2SD we suggest you enable Auto Link and make worrying about your internal memory a thing of the past.
Special Thanx to the Xperiablog
http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/ -
I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?
Solving MSVCR80 issue and Windows iTunes install issues.
Maybe you are looking for
-
SWF Object and Internet Explorer
I am experiencing some strange behavior with a SWF Im including in the following web page: http://www.bostonredevelopmentauthority.org/ The SWF displays properly on the first page visit in both Internet Explorer and Firefox. If I navigate away to a
-
Login Issue in Safari since 5.1 update
Since updating to 5.1 on my iPhone, I cannot login to some websites. I don't get an error message. It just brings up the same login page again with all the fields cleared. I already checked on other devices to make sure I had the right user name and
-
Microsoft Office 2011 won't even startup anymore
I can't seem to get Office 2011 to work after updating my system to Mavericks. I get this report after starting Outlook, and I get simular results when I try to open the other Office apps. Because I unfortunately need Word and Excel, I would like to
-
Dear folks I wrote a procedure (print_large_objects) to print clobs on a web page. It works well. But when I fetch and request for print by that procedure, I get 'htp buffer too small ... error' when it exceeds 4000 character. The code is like this:
-
So i purchased a crossover cat 6 cable to connect my MBP to my pc, for all my files are on the pc, and i wanted to put them on my MBP. Now when i set up sharing and all that good stuff, and open my MB's folders on my pc and drag and drop the files to