I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty

I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty and been able to resolve it?

Did you try deleting the mail account, then adding it back?   I've read a lot of times that is what needs to happen in order for it to work properly.

Similar Messages

  • Have upgraded to IOS 7 now my phone will not switch to cellular data when not connected to WiFi.

    phone will not switch to cellular data since upgrading to IOS 7. Have checked setting and everything is set to use data.

    Hello berkshireds,
    I would be concerned too if my iPhone only connecting to the Internet when connected to Wi-Fi. I recommend following the steps in the following article to assist with your cellular data connection:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Thank you for posting in the Apple Supprot Communities.
    Best,
    Sheila M.

  • HT4061 good morning! I just did a software update on my phone (finally) last night and now my phone will not come on.  All it keeps showing is the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYone please expl

    Good Morning,
    I just did a software update on my phone (finally) last night and now my phone will not come on.  It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYONE help me please???

    The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.

  • I updated from Snow Leorard to Moutain Lion and now my internet will not recognise  my password. All other comps use the network but my Mac upgraded Mac Mini keeps coming up with either 'timeout' or 'user or password not recognised' ...help!

    Hello all
    I upgraded from Snow Leopard to the latest Mountain Lion OS and now my Wifi will not work. When I try and insert the password to my Wifi network states either 'connection timed out' or 'password and/or user name not recognised' please help...!

    Take each of the following steps that you haven't already tried, until the problem is resolved.
    Step 1
    Restart the router. Many problems are solved that way.
    Step 2
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 3
    From the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts.
    Step 4
    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 5
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 6
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.

  • I did a software update on my iPhone 4S to 6.1.1 and now my phone will not connect to my Mac

    I updated the software on my iPhone 4s to 6.1.1 and now my phone will not connect to my Mac.

    missykittee wrote:
    now I am required to have a lock on the phone.
    No, you are not.  Apple merely encourages there customers to secure their own data.  Only fools choose to not have a passcode lock.  I hope for your own laziness that you never keep any personal data on your phone... otherwise you are setting yourself up for major issues when your phone falls into the hands of an unscrupulous person.

  • Hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been not help.

    hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.

    - Try restoring on another computer.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT4972 I have a n IPhone 4S.  I upgraded to IOS7 and then tried tp go back to my prevous IOS and now my phone will not turn on at all.

    I have a n IPhone 4S.  I upgraded to IOS7 and then tried tp go back to my prevous IOS and now my phone will not turn on at all.

    I tried to do the same, but couldn't find ios 6. I even tried  the APPstore, to download the last IOS6 version.
    The most problem is the running out of the battery.
    I've checked each app who is "eating" the most power.
    The battery stoped runaway, when I closed the weather service....
    So for now, I will use regular internet service, and probbaly will do to more app.
    Until, finaly, I will find my self with all the applications closed....:-)
    That will be the sign, to replace my phone to anderoid....:-)
    Till now, there is no any sign from Apple to have a glance to our complanes.

  • HT4623 I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?

    I updated my Apple Iphone 3GS this morning and now my charger will not work. I can use my boyfirends just fine but mine will not worl at all. Why is this and is there anything that I can do?

    Something is wrong with your charger or cable.
    If it works with another charger, then it is not the iphone

  • I have an iphone 5s and i just got the 7.0.4 update. Now i don't have the option to have a fingerprint scanner. Has anyone had this same problem? If so, why is that and what did you do about it?

    I have an iphone 5s and i just got the 7.0.4 update. Now i don't have the option to have a fingerprint scanner. Has anyone had this same problem? If so, why is that and what did you do about it?

    I have an iphone 5s and i just got the 7.0.4 update. Now i don't have the option to have a fingerprint scanner. Has anyone had this same problem? If so, why is that and what did you do about it?

  • Directx 11 and now Premiere CS5 will not work.

    I finally got my ATI 5770 working with Directx 11 and now Premiere CS5 will not work

    I just installed what I thought was Directx 11.  The latest file update I downloaded is only 9. dxwebsetup.exe from Microsofts web.
    I have a Dell XPS 8100.  I was on the phone with AMD/ATI, DELL, and XFX.  Dell said the card was an ATI, and AMD/ATI said that ATI now just makes the chips.  I tried Sapphire ATI 5770 and they didn't work, then I tried a program the took off all the drivers and I got the Dell drivers from the web, thinking that they are on OEM and with the DP Adapter, I finally got the 3rd ATI Eyefinity monitor to work. I tried Cuty of Duty and it worked for a couple of minutes.  I'm not into games, but I like the three monitors for learning software. One monitor is the video training and one is the software and the other is the Internet or an ebook.
    Now Premiere doesn't like anything. I tried going back to one monitor, and different resolutions. I had two monitors working at one time on this computer. I like the Time line monitor window on it's own monitor and the rest of Premiere on the left monitor.
    I was reading that Premiere likes 1280 x 900. That is not a mode on the ATI 1280 x 960 or 1280 x 1024.
    Could it be the latest Directx it installed or the fact the Display Port is in the card?

  • After downloading ISO8 my USB Ports on my IMAC arnt working and now my iPad2 will not charge?

    after downloading ISO8 my USB Ports on my IMAC arnt working and now my iPad2 will not charge? even tried to use 240v charger? both my iMac and iPad have been updated, my mini iPad is working on old iso7 so that won't be updated in a hurry, any help would be great.

    First is the most USB ports do not provide enough power to charge an iPad. Do not try and charge your iPad from such USB ports.
    There is no 240v charger. There is one charger that will work with US voltages and European voltages. If your iPad is not charger with the charger, make certain that is an iPad charger, not an iPhone charger. If the charger does not work try swapping the cable as the cable may be bad. If that does not work try another charger. All simple steps that should be attempted before pinning the problem on IOS 8.

  • How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    How do i restore my wifi setting back to the factory settings? I have changed it somehow :/ and now my wifi will not connect. My Airport is on and showing full strength but will not connect.

    Ok, if other devices are connecting but just not your MacBook then let's start troubleshooting the MacBook to possibly find out why.
    Please try each of the following, in order, until hopefully resolved:
    Note the following are excerpts from an OS X Daily article.
    * Turn Airport on & off – You can do this via the Airport menu bar or from the Network Preferences. This is the first thing you should try when troubleshooting Mac wireless problems.
    * Make sure Wireless/Airport card software & firmware is up to date – This is usually done just by going to the Software Update menu, if there are any updates available for your Mac or Airport, install them.
    * Delete and recreate connection – Try deleting and recreating/reestablishing the wireless connection, sometimes a setting can be corrupted and this may fix it.
    * Create a new Network Location – Similar to the above suggestion, try creating a new and different wireless network location to see if it resolves the connection problems.
    * Change DHCP auto settings to manual – sometimes there is a problem with the DHCP server, and if you manually set an IP address on the network you can be fine. Remember to set the IP to a high number so it wouldn’t interfere with other DHCP machines. As long as you have the subnet mask, router, and DNS settings configured manually as well, this shouldn’t be a problem.
    * Flush the DNS cache – Launch the Terminal and enter the following command onto one full line within the Terminal: dscacheutil -flushcache
    * Zap the PRAM – Reboot your Mac and hold Command+Option+P+R during restart until you hear another chime, let the Mac boot as usual.
    * Delete Wireless Config files – Delete com.apple.internetconfigpriv.plist and com.apple.internetconfig.plist files from ~/Library/Preferences and reboot
    * Trash your home directories SystemConfiguration – Remove all files within ~/Library/Preferences/SystemConfiguration/ and then reboot your Mac.
    * Reset your Mac’s System Management Controller (SMC) – For MacBook and MacBook Pro’s: Shutdown the MacBook/Pro, remove the battery, disconnect the power, hold the Power Key for 15 seconds. Replace the battery, reconnect power, and zap the PRAM and wait for 2 chimes before letting the keys go. Let boot as usual.

  • My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open.  Now what?

    My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open.  It said that the licensing had expired.  But this is not the case.  Now what?

    uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then properly install (do not migrate, use timemachine etc) using the installation files.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I have a new wireless router and now my laptop will not recognize the printer.

    I recently installed a new wireless router,Linksys E2500, and now my laptop will not connect to my OfficeJet 4500 wireless printer.  Operating system is Windows XP.  Says it does not recognize the printer.  It was working fine with my other Linksys router and I have been able to connect all of my other electronic equipment.  Thanks.

    You must reinstall the full feature software and drivers again to be sure it will work with the new router.  This is the fastest way.  Simply follow the instructions that came with the printer.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • All my data on my phone got deleted so I restored it through Itunes and now my IMessage will not recieve nor send out messages through my phone number but my email. I've tried alot but non is really working, help please !!

    All my data on my phone got deleted so I restored it through Itunes and now my IMessage will not recieve nor send out messages through my phone number but my email. I've tried alot but non is really working, help please !!

    Ok. You don't have to select your number. Just check your email under your "grey" number and then at the bottom of this page you will see the option "Start new conversations from". Select your number.

Maybe you are looking for