I have updated my iPhone to ios 7. Now, my iTunes on my Mac wont recognise it. Help please!
After updating my iPhone 4S to IOS7, my 10.6.8 iTunes will not recognise my iPhone. It says it requires itunes 11.1 or higher. I cannot find that update. Help please!
Click here for it.
(90486)
Similar Messages
-
i have updated my iphone to ios 6.0.1 but it is not activating so please could you help me out....while inserting in itunes it showing no sim card inserted
All iPhones sold in Japan are carrier locked. The Japanese carriers do not offer unlocking.
You can not use that phone on a carrier other than the one it is locked to.
Sell it and buy one you can use. -
i have update my iphone 3gs ios 4.1 to 6.1.3 but at the end activation problem occur
the error is could not activate iphone try again so please help me to resolve this problem.
Thank You......Odds are your phone was hacked to illegally unlock it.
-
i updated my iphone to ios 6. now i can not charge my phone with any cable. it says charging do not support this accessory. what should i do now? can anyone help please!!!!!!!
I upgraded my iPhone 4 last evening to iOS 6, the upgrade completed and the device was usable. Then in the morning I went to the device to check E-mail, Voice Messages, Test Messages, etc... and the phone was dead. I tried plugging the device into a charger (for a couple of hours) - still dead. Plugged into computer with iTunes, device not recognized or discovered, and iPhone was still dead... Took the iPhone into an Apple Store and the Technician looked it over for any visible signs of defect/malfunction, then performed various tasks to breathe life into the phone - nothing... His suggestion, at this point, was to replace the phone. He speculated that the iOS upgrade possibly corrupted the iPhone's charging firmware, and that this device was now a BRICK. Keep in mind that the phone and it's charging abilities were perfectly fine prior to the iOS Upgrade. I hate to go through the replacement hassle and the cost ($159.00) when the iOS upgrade caused the problem. Any suggestions? Thanks!
-
After updating my Iphone 5 my lock button isnt working well .... Need help please ..
After updating my Iphone 5 my lock button isnt working well .... Need help please ..
First, read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/
See if your phone is affected. -
I cannot get .arw or jpeg files from my Sony A6000 to be taken into my Lightroom 4.4 via the normal "synchronise" process. I have updated my Pc to Adobe RAW/DNG 8.4 with no improvement. Can you help please?
With regards to your .arw files:
You need to either purchase and install Lightroom 5.4 -- OR -- download and install and use the FREE Adobe DNG Converter version 8.4, did you actually launch and use the DNG Converter?
There should be no problem importing JPG files into Lightroom from your camera, what happens when you try? Is there an error message? -
Will I lose my photos in iPhoto if upgrade to a latest version? I have upgraded my system to Mavericks and now my iPhoto doesn't work. Can anyone help, please?
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store -
I have updated my iphone 4 to ios7 few days back, After that it becomes too much slow.all the applications take some time to open,
its touch response also became slow. .
One of my friends has also updated his iphone 4 to ios7,it is also facing the same problem.But the friend having iphone 4s is not facing any
problem with this new version.What i think iphone 4 has not too much good processor like iphone 4s & 5 to get it updated to ios7.
It destroys all the entertainment of using iphone.
How to update it again to ios6.
iphone 4 users please dont update iphone 4 to ios7.pleaseSorry, but Apple does not provide a downgrade path for iOS.
Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any device.
Note that you will void the warranty and loose official support by Apple.
Feel free to let Apple know at http://www.apple.com/feedback
Anyway, give a try resetting all your settings:
Settings > General > Reset > Reset All Settings -
HT4623 I have updated my iphone with IOS 7.0.2 but I cant add playlist from computer to my phone
I updated my iphone so it now has IOS7.0.2 yet When I try and add a playlist to my phone from my computer my computer tells me that my phone cannot be used as it requires itunes 11.1 or later... Help please as I need to install my new playlist for work tomorrow... aaarrgghhhhh
There are ongoing problems with the iOS7.0.2 update that Apple isn't cooperating in fixing. Similar problem with no accept button on 54 page terms of agreement when trying to download apps.
This is the answer that will probably help and won't cost you $19 for a one time fix solution.
Sync your phone to itunes
make sure latest itunes version is installed
get to terms and conditions and accept (no other choice!)
after going through the download, accept, (may take a couple of times) should clear out the bugs
I'm no techie, but seems to be solving a lot of users problems
Apple needs better beta testing to avoid the various lockups and better tech support -
I have recently updated the iTunes in order to update both my iPhone and iPad to ISO5.0. unfortunately, after the updated, my iPhone is no longer playing any music. whenever i go to play music on my iPhone it just reverts back to the playlist or it keeps running through song to song. But still, no music is on.
I tried to re-sync the music library, error mesage prop up,
"The iPhone 'xfdsarw' could not be synced because the sync session failed to start"
I delete the iTunes and download it again. Then, I restore my iPhone to the version before ISO 5.0. After, I do the updated again. However, the problem still exists. What should I do? Please advise. I cant believe that iPhone cannot play iTunes!!!!
How come, apple acts like Microsoft? I saw this problem had existed in the developer stages back to the past summer. Then, you guys didnt fix it before the release of ISO 5.0. Hopeless. As being a life-long apple fan, I am so disappointed! Wordless ....My music can be played in my iMac and iPad itunes, but not my iPhone4.
i did what you have suggested to unsync the music and then re-sync again. should i try to cancel all the music in the library and then restore them again. can it work? i dont want to bet coz reloading so much music is very trouble. -
Cannot get itunes 10.5.2x64 to install at all, 10.5.1x64 worked ok on my Vaio win7 laptop.The update totally screwed everything,
all I get is "the installer encountered errors before itunes could be configured.errors occured during installation.your system has not been modified."
Any help please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Praise God - I found the solution after hours of work: (1) Uninstall all Apple programs (itunes, Quicktime, Bonjour, .....); (2) Go to "Common Files" and delete all Apple files - this might be difficult for some are locked from you - you may have to change the "Owner" of the file in order to delete it - if that doesn't work "Rename the Apple Follder to something like Apple Old - that's like deleting it. Then download 10.5 from Apple and away you go - yippee.
-
on appstore i dont need to write in password and i have tried to do anything and it dont work and i get ****** of because i updated my favourite game and i cant play it.... i want to throw my iphone to the ground :/
It sounds like to me you're trying to sync using the computer.
Try these things and see if it helps before you try your next syncing session. If none of the things below work then you might consider trying to sync using iCloud only.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
HI is there any body?
Perhaps you can tell what error you are seeing. What happens when you start your iPhone.
-
I updated my iphone to IOS 7 now it is getting hot and battery last at about 8 hours.
I'm having problems with IOS 7, I'm afraid of it explodes. It heats a lot and the battery doesn't extends. What can I do?
try resetting your phone by turning it off and back on again. Also, the server may still be slammed from all the activity, so it may take a little with to connect.
-
Should I update my iPhone 4 (4.1 to 5.0.1) or stay outdated? NEED HELP, PLEASE!!!!!!?
Ok, I know that this may be long but bear with me, really need your help guys!!!!
Ok, so a few years ago, I bought an iPhone 4 (I was in Zimbabwe, now in the US) that was factory unlocked from what I can tell. Reason why I "THINK" it's unlocked is because
1. It did not have Cydia installed when I got it, just stock with native apps only
2. Running on 02.10.04 Baseband (That cannot be Cydia Unlocked), I manage used several Network Providers and all Sim cards worked and still do, no problems. (Using T-Mobile Now)
3. Model Number is MC603B, and according to my research, it is a factory unlocked model.
Unless im mistaken???????
Here we go. The iOS 5.0.1 is out and I am now running iOS 4.1 (Jailbroken), which is really bakward, so loads of tweaks and apps cant run on my outdated iOS and i want iOS 5. I have heard people all over the internet complain that after the iOS5 upgrade, their phones locked-up and can't dowgrade or activate after the update, so if that happens im STUCK forever, and I really dont know what to do!!!!
HERE ARE MY QUESTIONS:
1. Is my phone really factory unlocked, based on what I listed above? Or is there any other way of checking???
2. If I DO update, do I risk locking-up my phone????
***3. Should I update it "while preserving my baseband" and still manage to Activate it, or just leave it to update my baseband????? PLEASE HELP. Read my questions carefully and answer on what you think.
Thanks alot guysWell, since the iPhone is not officially sold in Zimbabwe, & that's where you purchased it, you can pretty much count on the fact that it was hacked to unlock it, regardless of what you think or see. Thus, you can be pretty much assured that if you update software your phone will be re-locked to the carrier it was originally locked to.
Maybe you are looking for
-
Hi Experts, Could you please tell me what actions/functions we can do with Receiver JDBC Adapter as well as with Sender JDBC Adapter? Regards Sara
-
Deploying Air Application with Zend AMF Dataservices to remote server?
I cannot find anything to guide me through getting this set up.. it's frustrating because I feel this is probably the whole point of Air! I have an Air project in Flash Builder which is set up with the Data/Services panel, using a custom php model fi
-
Satellite Pro L500 - Webcam has stopped working
The built-in Web Camera on my Satellite Pro L500 has stopped working with the following message: C:\Program Files (x86)\Toshiba\Toshiba Web Camera Application\TWebCamera.exe The application has failed to start because its side-by-side configuration i
-
This is a BAD BUG, but hopefully you save ALL of your work prior to testing in Live View. Because if you have a JavaScript, that you messed up and there is an endless loop, you have to FORCE QUIT Dreamweaver CS4 ( ) and lose the unsaved data since th
-
Packing Material Functionality
Dear All, Description of Scenario: I have BOM for FG(Finished Goods) with RM(Raw material) and PM(Packing Material), where Packing Material Being BOX. In BOX we can pack 15 nos of FG, thus in BOM the quantity of BOX would be (1/15 = 0.067) to manufac