I have updated to ios7, now my camera picture is wobbly, and I have no video capability, help please
It seams that since I updated to ios7 my iPad camera picture is wobbly, and I have a video button that does nothing, help.
lol...your answer worked, thank you so much. So simple, just move the screen up and down!
Thank you Popoki Iti
Similar Messages
-
I cannot get .arw or jpeg files from my Sony A6000 to be taken into my Lightroom 4.4 via the normal "synchronise" process. I have updated my Pc to Adobe RAW/DNG 8.4 with no improvement. Can you help please?
With regards to your .arw files:
You need to either purchase and install Lightroom 5.4 -- OR -- download and install and use the FREE Adobe DNG Converter version 8.4, did you actually launch and use the DNG Converter?
There should be no problem importing JPG files into Lightroom from your camera, what happens when you try? Is there an error message? -
Help please
What version do you currently have?
If you have iOS 5.0 or later, do not update through iTunes if possible; update over Wi-Fi if you have it. Just go to Settings > General > Software Update. -
I've been hppily usingtoday until about half an hour ago!!!
It updated the O/S, then I went about connecting to I-Tunes, after a while it flashed up on I-Tunes "There is no SIM card installed in the I-Phone you are attempting to activate - please disconnect and try again..."
I've tried taking it out an dputting it back in several times!!
The phone now just says "no service"..
Thank you for any help!!! -
HT201210 tryed to install ios7 now iphone 4s in reboot mode and wont come out of it help
tryed to install i07 on iphone 4s now in reboot mode but wont reboot
See the following. Do not omit the Additional Information paragraph.
Try changing the DSN for Google DNS servers.
Using Google Public DNS - Public DNS — Google Developers
Try on another computer/another network -
I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?
I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support. -
I just updated to IOS7, now when I am sending a text the letters and words have a delay so I dont see them for a few seconds
I HAVE RESOLVED THIS!! The problem was that I was signed in to iCloud on my iphone with an old Apple ID and using a different Apple ID on my pc. I signed out of iCloud on my phone, then re-signed in with the same id as the iCloud on my pc. Presto chango. All is well.
-
Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.
The only thing I can think of is if you got a replacement D610 as rumored here:
http://nikonrumors.com/2014/01/27/nikon-is-replacing-some-d600-cameras-with-new-d610-model s.aspx/
In that case, you would need the new version of Camera RAW or DNG converter as per Camera Raw plug-in | Supported cameras .
The other thing to check is if the files open in the Nikon native ViewNX software. If they don't it's time to call the service center. -
i updated to ios7 now i cant download new apps. what should i do?
Try a restore via iTunes. You need to put your device in dfu mode to let iTunes restore. If you don't know to put it in dfu mode, google it.
-
I've updated to IOS7 now app updates wont disappear from screen even after updating
I have updated to IOS7 on my Ipad and Iphone. I've noticed now that when i get a notice that an app needs an update, I tap the "install" button and after the update is finished the "install" icon changes to "open". Problem is that even if i tap the "open" icon, the app opens has it should. But when I return to the "app store" icon under updates the app I just open still appears on the list and still has the "open" icon visable. Use to be once you updated an app it would dissapear from the update list. I know have a list of 7 apps all updated and showing the "open" icon on my Iphone 5 and 13 on my Ipad. I've tried shutting down my device and restarting, yet they still show up on the list. Is it just me, have I missed a setting or something? How do I get rid of updated app showing up on my update list?
I've had the same issues since iOS 7 was released last week. Sometimes my iPad' App Store icon's badge shows I have 3 updates. When I enter the App Store to update them, there are no updates shown. When I back out of the App Store, they are no longer shown on the iPad's App Store icon. When I again enter the App Store, only 2 updates show up. It's all very inconsistent. Rebooting, restarting, etc all do nothing. I believe the issue to be on Apple's end.
-
i have updated to ios7 on my iphone 4s but the keybard has become extremely unresponsive and i cant write mails/texts/searched etc without a considerable delay in the text appearing. How can i reinstall ios7????
litemotiv wrote:Nice entrance Bruce Lee JR, welcome!
Thanks~!! I usually like my presence to be known and not just sit in the dark I wanna become apart of the community~!! Actually, every activity I do, I like to get involved~!!
cybertorture wrote:
wow man, u really enjoy this ? ... well u ll see here many ppl like yr self who feels @ home here after a looooooong distro hopping
well be welcome here and long live ARCH !
LONG LIVE ARCH~!!!!! Hek yeah I enjoy, especially since I was a major power user of XP & strictly XP. There was everything I ever needed. The only thing was that, if there was an Open-Source alternative, I would take it. I didn't know much about Linux other than that it ran EXTREMELY well as a server just as FreeBSD does. Once I finally took the time to google Linux, read about ditributions,open source and read blogs and read community comments etc.. I was like" I gotta be apart of this~!!" because XP was the shizz. But now Linux, more specifically, ARCH~!!!!! -
I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?
Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh -
I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.
This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plug-in | Supported cameras
So you can upgrade to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
And here is a great video tutorial on how to use the converter.
https://www.youtube.com/watch?v=0bqGovpuihw
Gene -
i have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and lost all my data. anyone knows how to fix it?
If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, there is a hardware problem.
-
can anyonehelp, i have updated to ios7 which has put a passcode on my ipad, i keep getting the code wrong, i have no itunes or cloud sync
Duncanray10 wrote:
... I keep getting a message stating my ipad needs software to be 10.6.3. ...
You are misreading it... it is referring to iTunes on your computer...
Download and Install the Latest version of iTunes onto your computer...
http://www.apple.com/support/itunes/install/
Maybe you are looking for
-
HT1430 iPad2 is no longer recognizing that the SIM card is installed
My iPad2 is no longer recognizing that the SIM card is installed. I keep ketting a "NO SIM CARD" message even though the card is in the slot. I've tried switching on and off, resetting and removing and then reinstalling the SIM card. Any ideas?
-
Writing large xmltype data to UTL_FILE and setting max row per file
Hey Gurus, I am trying to create a procedure (in Oracle 9i) that writes out xml data I have created into several xml files (file would probably be to large for one xml file output...I am doing this for 270,000 rows of data), setting the max rows to 1
-
Problem with submit button - Acrobat/Reader
I have created a simple fillable form with Adobe Acrobat XI Pro with a submit button, form posted to the web. The form/button works fine for me in Google Chrome, IE, and Safari (Windows 8, Outlook email client) but doesn't seem to work for users with
-
Hi all! I'm from Italy and coming to NY next september. The big question is: if I bought the new 3gs, would it be operator lock or not??? Would it work with italian SIM card? Could anybody ask it to an apple store (i don't have any tel number...)???
-
Can I use PDK on a non SAP Platform
Hi Everyone, We have SAP ECC available with us with certain modules. I am not too sure which ones. Now, we are brainstorming if we can develop a plain normal web application using JSP/Servlets but connect to SAP ECC using JCO protocol. We will import