I have upgrade my iphone 4 to ios 6 and from this moment every day my iphone go to block. it turn off and i can't turn on if i don't connect to charge connectors.. someone have the same problem? how can i solve it?
i have upgrade my iphone 4 to ios 6 and from this moment every day my iphone go to block. it turn off and i can't turn on if i don't connect to charge connectors.. someone have the same problem? how can i solve it?
I am experience a similar problem, my iphone 4 either turns off by itself or I am unable to answer a call. Everything just blocks. After contacting 2 different apple service spots still no answer as to how can we fix the problem. Worse, I am unable to revert back to ios 5.1.1 where everything worked just fine.
Similar Messages
-
my phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup
Well, it appears that your backup is corrupt, thus causing your issue. So, you'll have to restore as a new device, & not from backup. Follow this by syncing your content back to your phone:
http://support.apple.com/kb/ht1414
Do not restore from backup. -
After upgrading to ios 8.2, my keyboard on my iphone 5s is weird. When i typing a sms, the screen is locking it self. Does somebody have the same problem? Sorry for my bad english...
Hello Wexxwoxx,
Welcome to the Apple Support Communities!
I understand that after you updated to iOS 8.2, while typing a message your iPhone seems to be locking itself. In this situation, there are a couple of different troubleshooting steps that I would recommend.
First, I would suggest closing the Messages application completely by using the instructions in the attached article below.
Force an app to close in iOS - Apple Support
After the Messages app is closed, I would recommend resetting your iPhone using the instructions in the next attached article. After the reset, open Messages fresh and attempt to use as you normally would.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Have a great day,
Joe -
This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach. -
my ipod will only charge when i fiddle with it and hold it in a weird position, i've tried a 2 new chargers but i still have the same problem, any ideas what to do?
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. (is this what you meant by charger?)
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.
I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.
-
Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?
Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
I updated iTunes to 10.4 version and now it doesn't start and send a messages "iTunes has detected an error and must be closed". Someone have the same problem and how can we repair our installation insted of change the windows XP installation? Best regards
Only way to get iMac starting again was to re-install 10.4.4 from DVD, and then update it into 10.4.6. For a while it worked perfectly, just as before.
Then I tried to print to CD with my EPSON Stylus Photo 950 from Adobe Photoshop Elements (2.0). It didn't print anything, but printer started flashing all lights. The print job was not performed, so I did remove it from the Printer Utility. After that the iMac started "ticking" again, same noise than before, after 10.4.7 installation. I did re-boot iMac. It never started, it does stuck on gray screen (gray block running clockwise). HW test from DVD didn't find any problems (extended search looping 3 times). But Disk Utility found hard drive to have inaccurate node structure, it could not fix it.
Apple support recommended to use DiskWarrior. However, it does not support (yet) Intel Macs. I haven't got TechTool Pro 4.5.1 anywhere. iMac does start on to FireWire mode (T at boot), but I cannot see the disk from 10.2.8 iMac.
So, obvisously the problem is not 10.4.7. I believe it to be ESPON printer driver compatibility on Mac OSX. This does not suprise me, EPSON printers *****, I shall never purchase one again. However, disk catalog structure should not get messed by one faulty printer driver! -
I have a problem when I receive calls I can not hear well or when it cuts, like when I pass calls. I have to put the earphone. someone has the same problem?
I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
Now all is working.
Thanks,
B. -
i have the same problem in my iphone. i can receive call and talk and listen too otherwise no sound at all like ringer tone , on-off click soung , video-music song , game sound.
i have tried to clean the audio jack too but result is the same. Can any body help me please.No external sound or not sound at all - external or when using the earbuds?
Standard troubleshooting steps in order are; power the iPhone off and on, Reset by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, Restore.
i had it once before, restored the iPhone and it was solved, but i don't want to restore my iPhone every day.
Does this happen every day? If not, when was the last time this happened?
If you have sound when using the earbuds, another thing to try is insert the earbuds and start playing a song - making sure the sound can be heard with the earbuds. Without pausing the song, remove the earbuds.
If no sound is available with the speaker and a the troubleshooting steps do not resolve it or one of the steps does resolve it but the same occurs again, time to give AppleCare a call (800) 694-7466 or make an appointment at an Apple Store if there is one nearby. -
I want to restore iphone 4s and i have the error 21.How cand i solve yhis issue?
I want to restore iphone 4s and i have the error 21.How cand i solve yhis issue?
http://support.apple.com/kb/TS3694#error21
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
Ever since I upgraded my iMac to the latest software I can't seem to burn any cd's does anyone have the same problem?
Care to share which latest software you installed?
-
I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
in response to Pita Fito
I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...I can send e-mails just fine with apple mail on yosemite...
Might not be a generic problem but rather a personal problem..
You should try find a fix rather than waiting on apple.
Hopefully somebody can help you out.
More than happy to help with your settings/preference pain... And compare mine with yours...
If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
Is it a gmail or icloud email acount? Can be of more help if it is. -
Since I upgraded my iPad 3 to IOS6 my safari just quits unexpectedly. Does anyone have the same problem?
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I just updated my Iphone 4 for IOS5. The photo lybrary just duplicated after sync. Does anyone have the same problem?
Try this
https://discussions.apple.com/message/15135297#15135297
Maybe you are looking for
-
LDAP authentication in a rich client application
Hi, Our application runs ona WLS 8.1 environment. It has a Flash client side. On WLS side, we created an IPlanetAuthenticator and now are able to see the LDAP users in myrealm / users. I went through some weblogic docs. There were info about FORM bas
-
I have a problem about sql to extract xml node,the sql followed: select a.disptx.extract('/Record/_20/text()').getStringVal() from swifti a where swidty = '6666666666666666666' and the clob is : <Record> <swrctm>2223</swrctm> <swintm>22:23:13</swintm
-
I want to deply cirrus with a (rather large) client, Now.
I'm looking to use this product for a rather large client, but since it is not yet official, I can't guarentee that it will continue to work. How is the outlook for this product, as we're really looking forward to use it the coming years. Will adobe
-
if we passed a linkedlist object to another procedure is it passed by value or by reference what i remembered that all object are passed by reference in Java and all primitive types are passed by value please confirm this to me is it right or wrong?
-
Hello Forum, A dataload was taking about 3 hours which usually takes 1 hour. I've turned the request red and reran the load from Infopackage. But while the new load was running, the request that I've turned red was also updating the records. My quest