I have upgraded from 7 to 11 photoshop and am trying to organize photo in calendar format. How?

I have upgraded from photoshop 7 to 11 and am trying to format the photos in calendar format as I did in the 7 version and can not figure out how. ?

A lot of things changed with Elements 11, including the available display views. There is no longer a calendar view like in Elements 10 and before. The closest available is to go to the Events page (click Events in the top bar), and then switch from Events to Smart Events (just below the top bar). This will group all of your images into the day on which they were shot. However, it doesn't separated them on a calendar and leave you the blank spaces where no images were taken.

Similar Messages

  • I have upgraded from tiger to leopard and seem to have lost Photoshop 7.0. how do i retrieve it?

    I have upgraded from tiger to leopard and seem to have lost Photoshop 7.0. Is it possible to retrieve it

    Photoshop 7.0 only goes as far as 10.4.11
    If you have a drive, you can put 10.4.11 on it or a partition of it
    and save some money.
    I am not convinced the upgrade is worth it,
    but I just do simple things.

  • Can I remove photoshop cs2 after I have upgraded from cs2 to cs5?

    Can I remove Photoshop CS2 after I have upgraded from CS2 to CS5?  I upgraded from CS2 to CS5 quite a while ago and I have never removed CS2.  Will it affect CS5 to remove the old CS2 if it was an upgrade?

    If I were you I would just delete the installed  Adobe CS2 folder. Adobe CS2 uninstaller my remove settind CS5 made to your system after CS2.   The CS2 uninstaller may try to restore settings to a point in time where there was no Photoshop installed on your system.  If you do a CS un-install you may need to then Install CS5 on top of itself the update cs5 for the install will not have the updates you will be back at CS5 level .

  • I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore.  If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

    I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

  • HT1386 I have upgraded from  an iPhone 4 to a 5 i have an itunes account on my laptop for the 4 and have set up a new account for the 5 on my desktop how do I get my contacts , music, apps and photos over to the 5 from the 4?

    I have upgraded from an iphone to a 5. I have an itunes account on my laptop for the 4 and have started a new itunes account for the 5 on my desktop at work as the laptop was being fixed. I want to transfer all the contacts, apps and music, photos etc from the 4 to the 5 How do I go about this (in dummies language please!)

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • I am new to mac's and have upgrade from Snow Leopard to Lion but......

    I am new to mac's and have upgrade from Snow Leopard to Lion but not all my application will work. Is it save to reinstall using original snow leopard dvd and does it wipe all my other application like apature? I am in a panic over this, any help!!
    I came across this online and i want to know is it safe to do this:
    Backup your User folders to an external drive. This should preserve your documents, photos, music, etc. If you store those things in locations not in the User folder, make sure to copy those over too.
    Insert the Snow Leopard disc. Restart your Mac and hold down C to boot to your DVD drive.
    Go to Utilities in the menu bar once the installer pops up and select “Disk Utility.”
    Find the drive in the sidebar where Lion is installed, select it and navigate to the Partition tab.
    Click on the drop down menu under Partition Layout and select “1 Partition.” Hit Apply.
    Now navigate to the Erase tab and make sure “Mac OS Extended (Journaled)” is selected, then hit Erase to delete all data on the drive.
    Quit Disk Utility to get back to the Snow Leopard installer and proceed with the install.
    Restore your User folder and documents from your backup.
    Run Software Update to get everything current, install your apps from your original install media and update those as well.
    if any one can help me that would be great, thanks Mike

    Before you do that why not do this first:
    Repair the Hard Drive and Permissions
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    If this doesn't help, then you can proceed to reinstall Snow Leopard as follows:
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    This will erase the drive so be sure to backup your files before doing this.

  • I've had Itunes since the original ipod came out, I have upgraded to the new version, and upgraded my Ipod to and Ipod Touch, but I can't get the music I already purchased from the old Itunes to play/sync in my new itunes or ipod. How do I fix this?

    I have the new version of Itunes and have upgraded from 1st gen. Ipod to 4th gen. Ipod touch, I am unable to sync all my music from my old Itunes to my new Ipod, also when I try to play the music on the computer through Itunes it says it needs to be authorized but keeps using my Old email account (which I don't have anymore) for me to authorize, is there a way to fix/ change this so I don't have to buy that music over again?

    What exactly happens when you try to sync?
    Does iTunes see the iPod?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
      Managing content manually on iPhone, iPad, and iPod
    Backup the iPod to iTunes and then restore from that backup
    ]iOS: Back up and restore your iOS device with iCloud or iTunes

  • Since I have upgraded from 7.1 then the power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours

    Since I have upgraded from 7.1 then the power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery.

    Wrote a little wrong the first time!
    Then I upgraded to 7.1 so have power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery.

  • I have upgraded from 10.5 to 10.6 and found that all folders/files/pics have pixelated (either white or black) patterns on them. But it turns out fine when i open up the affected files/folders/pics. And this phenomenon persists after updating software.

    I have upgraded from 10.5 to 10.6 and found that all folders/files/pics in my disk drive have 'dotted' (either white or black) patterns on them. But it turns out fine when I open up the affected files/folders/pics. And this phenomenon persisted even after updating to the latest software. I proceeded to upgrade to 10.8 and updated the latest software thinking that this might resolve the problem but still stays the same way as it was. Could it be the Adobe flash player that is causing this problem? Please help.

    this posting shows how to migrate wiki. http://discussions.apple.com/thread.jspa?threadID=2205892
    I did it and it worked.

  • Please are you able to help. I have upgraded from Windows XP to 7 and am no longer able to email pho

    I have upgraded from Windows XP to Windows 7 and am no longer able to email photographs from Elements 10. I need a verification code and have requested this several times. I have looked in the spam but nothing has arrived.Thanks you.

    The software on the CD will not run on a Mac.
    You may be able to navigate through the CD and pull out the image files, however.

  • I have changed from pc to mac and photoshop elements 2.0 disk does not install on mac

    I have changed from pc to mac and photoshop elements 2.0 disk does not install on mac

    Hi keltystu,
    You are doing 2 things wrong:
    1. you are trying to run EXE file(installer) on MAC
    2. You are trying to run a very old application on latest configuration which is not compatible and may not fulfill the appropriate requirement.
    Thanks
    Kapil Malik

  • I have an IMAC and purchased OS X Lion to upgrade from the APP store, and launched the software for downloading, and I have been waiting on this for an hour, and it still says it's downloading? What do I do next?

    I have an IMAC and purchased OS X Lion to upgrade from the APP store, and launched the software for downloading, and I have been waiting on this for an hour, and it still says it's downloading? What do I do next?

    Welcome to Apple Support Communities
    The OS X Lion installer takes more than 4 GB of space, so it is normal for most Internet connections to take the download more than an hour.
    If you want to see the download progress, open the Mac App Store and go to Purchases.
    Before upgrading, make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com

  • My husband and I have upgraded our phones (iPhone 4s and iPhone 5) to the iPhone 5s.  We have given 2 of our kids the "old" phones and want to set them up as an iPod touch.  Both kids have email and need to be able to text (iMessage).

    My husband and I have upgraded our phones (iPhone 4s and iPhone 5) to the iPhone 5s.  We have given 2 of our kids the "old" phones and want to set them up as an iPod touch.  Both kids have email and need to be able to text (iMessage).
    I have read multiple posts on how to do this and I am still confused.
    Apple ID/ICoud:
    We want to be able to monitor what they do, but do not want their devices linked to our emails/contacts/etc...  Each kid has their own email account.  So, from what I have read the best way to do this is to use our family Apple ID, but set them up with a separate iCloud account?  Is this correct?
    Reset/Restore/DFU:
    To start fresh we have done multiple factory resets.  I did one that someone said was a DFU and a plan ol' factory reset, etc...  Not sure the difference.  However, when I do that I get the "hello" screen and am able to start setting the phone up anew.  However, when I go to set the phone up as an iPod I end with the same result.
    So, here is what I am doing (tell me what I am doing wrong):
    Hello Screen
    Asks me to select language and selecting:  English
    Select Your Country or Region:  United States
    Choose a Wi-Fi Network:  select my home wi-fi network
    Enter password:  entered my home wi-fi network password
    Activiate iPhone - wants me to enter Apple ID and Passwordsays that this iphone is currently linked to an Apple ID (k*******@gmail.com).  Sign in with the Apple ID that was used to set up this iPhone.
    Location Services - I have enabled location services
    Set Up iPhone
    Set Up as New iPhone
    Apple ID
    Options are to sign in with your Apple ID or Create a Free Apple ID
    Or I could "skip this step"
    I signed in with my Apple ID
    Terms and Conditions - Agree
    iCloud - I can select either to use iCloud or Don't Use iCloud - I selected use iCloud
    Find My iPhone - I can select either to use find my iPhone or to not - I selected use find my iphone
    Once I do this it says iMessage and FaceTime and shows the following:
    my email
    my other child's cell phone number
    and my husband's work phone number
    This is where things do not make sense.  I only want the phone set up with the current child's email address.  Where did I go wrong?

    There are a number of Apple services: iMessage, FaceTime, iCloud, Game center, Find My iPad, etc.
    Now, to share apps, music and books you need to have the same Apple ID:
    iPad's Settings > iTunes & App Stores > Apple ID > Your purchasing Apple ID.
    For the other service, your wife should have her own Apple ID.
    All she needs is a valid e-mail address, apply Apple ID below:
    https://appleid.apple.com
    Here's a limk with useful tips: Note: It's also valid in IOS 6
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

  • I have upgraded from Mountain Lion to Mavericks, since then my Adobe Flash Player don't want to work?

    Hi, can anybody help me please, i have upgraded from Mountain Lion to Mavericks, since then my Adobe flash player don't want to work.
    I clicked on update and downloaded the update from Adobe and installed it.
    Every time i get an error saying - "that this wasn't downloaded from App Store".
    i can not find it in App Store.
    What must i do?

    Try this: in your Utilities folder launch Adobe Flash Player Install Manager and run it to completely uninstall Flash. Then go to http://get.adobe.com/flashplayer/ and download Flash
    Once downloaded, double-click to open it and run the installer. If you get a message saying the file can't be opened, or similar, Control+click or right click and select 'open' and should then be able to proceed to install it.

  • I have upgraded to 10.6.8 and have purchased 10.8.2 but it will not let me install until I have 10.8.0 so it says... I cannot find 10.8.0 anywhere... what to do?

    I have upgraded to 10.6.8 and have purchased Mountain Lion 10.8.2 but it will not let me install until I have 10.8.0 and I cannot find the download or a way to get it anywhere.  What do I do to upgrade?  Thanks for the help!

    Yes... Thank you.... the first 10.8.2 was not the full version from the app store... all good!  Thanks Allen.

Maybe you are looking for

  • Windows 7 64-bit ask for validation; when installing itunes?????

    I bought a new computer. It has the 64 bit verion of windows 7. when i download the installer it responds with "The installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor

  • My Blackberry died! Help!

    So I was out and I picked up my BB and pressed the unlock button at the top, nothing happened so I pressed all the keys and it still didn't turn on. The battery was nearly fully charged, so it could'nt have died and to make sure, I've put it on charg

  • P2 import problems

    HELP! I am having terrible import issues with P2 media. I am using FCS 5.1.4 on both a powerbook and a DP G5. Random clips will not import into FCP. You can scrub through the clips, but they won't load. I have tried several other import programs like

  • Saving Interactive form as Noninteractive form finally

    Hi, We are creating interactive forms and at the final stage, when the user submits the form, we wish to archive the form as a non-interactive form. This final archive will be build in the program as soon as the submission is made. Experts, any idea

  • TV and Airport EXPRESS stop streaming after update

    I have read all of the posts regarding the Airport Extreme update being the culprit of the slow streaming with the Apple TV, but I have an Airport Express (2 actually) that suddenly stopped streaming after the last batch of updates (iTunes 8 etc.). E