I have upgraded Norton 360 to latest ver but does not work with FF ver 22/?

I do live updates on Norton 360 on daily basis. After upgrading to FF 22 from ver 21, I get the message that Norton toolbar is not compatible. I have rolled back to FF ver 21 due to this conflict as Norton works fine with ver 21.
Win7 64-bit Enterprise edition

hello, according to norton the toolbar is compatible with firefox 22. please run the norton liveupdate repeatedly & until all components are up-to-date. in addition make sure that the toolbar is enabled under ''firefox > addons > extension'' afterwards.
for more information refer to http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-22-Support-for-Norton-Toolbar/td-p/979947

Similar Messages

  • Have macbook 13 inch, full trackpad yet gestures does not work with Lion

    Installed Lion, tried to use gestures but does not work, have macbook with full trackpad without bottoms, went to System Preferences, Trackpads, checked for all features, is there anything else I need to do?

    Check some features change others,and if you check someones doesn't work,check it and be sure you no asking do different things with the same gesture,happen to me too so i take the time to check uncheck what i check..

  • I often rely on my Norton Toolbar for sites, and it does not work with the new updates. Can I uninstall recent Mozilla updates until this add-on works with Mozilla, or am I stuck? Thanks!

    It's probably really easy to figure this out and uninstall the updates but, well, I'm slightly tech-illiterate! I use my Norton Toolbar a lot for those sites I visit infrequently, and this non-compatibility issue is the same reason I stick with Mozilla over Chrome, but now I can't even use my Norton information with Mozilla. Thanks.

    http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

  • I have purchased i phone 4s from US .but its not working with vodafone microSIM .can you please tell me whether its hardware or software problem

    please reply me soon..

    i have purchased unlocked iphone
    How do you know that?  Unless you bought it directly from an Apple Store as unlocked, it pprobably isn't or was hacked.  Phones that were hacked to "unlock", often don't work correctly and ALWAYS get re-locked when updated or restored.

  • Norton 360 premier is not compatible and the identity safe does not work with firefox 4 it worked with earlier version. If there is a solution great otherwise I am going back to IE.

    All my passwords are Norton identity safe protected. If firefox4 does not work with it I am forced to go back to IE. Previous versions had a patch. I only realized the problem after downloading the new update. I wish I never had.

    Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
    I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Question
    I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
    ::Worked for me::

  • I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

    I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

    Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
    But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
    While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

  • I have aperture 3.4.4, which does not work with Yosemite. Is there a way to upgrade my Aperture version, or do I have to buy Aperture again?

    I have aperture 3.4.4, which does not work with Yosemite. Is there a way to upgrade my Aperture version, or do I have to buy Aperture again?

    If you own any version of Aperture 3, you are entitled to a free update. Only it can be tricky, if your version is not associated with your AppleID, because you bought it with a serial number.
    Have you checked, if you can see an update at the App Store Updates page? Or an "Accept" button on the Purchases tab of the app Store?
    Contact the AppStore Support and request a redeem code, to be able to buy the update for free. You will need to provide a proof op purchase of Aperture.
    Use this link: http://www.apple.com/support/mac/app-store/contact/
    Apple sent redeem codes for Aperture 3.6 to several users who had bought the version on disks, if they could provide a serial number.  See for example this discussion: (The post marked as the solution)
    Re: Aperture update not possible after update to Yosemite
    It is really unfortunate you missed the window of opportunity with Mavericks MacOS X 10.9.5, when the update was easy.

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

    I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

    If you had given us sensible information, I could look it up for you if your efforts fail.
    Right now, I don't even know if you are on a Mac or on a Windows box.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How can I get RAW pictures to open in PSE 12 and PSE 13?  I have installed the plugin 8.7.1 but it wont work with either.

    What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????

    Hi I asked a computer engineer to install RAW plug in 8.7.1. on PSE 12 for me, and he couldnt do it either.   I have bought PSE 13 and followed the advise I was given - go to Edit - expert - Help - plugins - RAW - update- and IT WORKS !!!    DW
    Original message----
    From : [email protected]
    Date : 25/01/2015 - 11:53 (GMTST)
    To : [email protected]
    Subject :  How can I get RAW pictures to open in PSE 12 and PSE 13?  I have installed the plugin 8.7.1 but it wont work with either.
        How can I get RAW pictures to open in PSE 12 and PSE 13?  I have installed the plugin 8.7.1 but it wont work with either.
        created by susanl96972449 in Photoshop Elements - View the full discussion
    Hello, I have been experiencing similar problems and followed the suggestion and yes, the raw icon comes up as illustrated but there is nothing there to indicate any further action can be taken.  So I am presuming that means it is installed and no further action required?
    Here's my problem:  I have had no problems  getting my pics into my organiser in Elements 12 from either my Nikon D7100 or my Fujifilm X100S - until last week.  Suddenly when they are imported all I see is the timer icons but they don't open to let me view them.  If I click on one it will open and I can then edit it but it will not save an image onto the grid for me to view so it's really frustrating not being able to view all my photos in order to decide what to edit and compare them.
    Here's what action I've taken so far - restarted the computer (endlessly), checked the updates and installed them, checked I have the latest raw plug in (I do) and gone into edit/update thumbnail (doesn't do a thing) - and torn out a fair amount of my hair.  So anyone out there experienced this and can give me some advice? Please?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7129439#7129439 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7129439#7129439
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • 10g JSpell PJC does not work with latest JSpell version

    Looks like latest (10g) forms demo - Spell check with JSpell does not work with the latest version of the JSpell software (does not look like this demo been changed from the previous version).
    Does anybody has a success running this or have any suggestions how to integrate it together?
    Thanks for any input.

    We're in contact with JSpell on this issue and will revise the integration code as soon as we recieve the relevant updates from them.

Maybe you are looking for