I have upgraded to 10.10.3 on my MacBook Pro now the Calendar is not working properly. Help please?!?

Yesterday I upgraded my MacBook Pro 13" (Early 2013) to 10.10.3. I immediately started having problems with it opening apps slowly. So I read and discovered it had replaced some of my apps with newer versions. I also restarted it 2 or 3 times. That seemed to solve that problem. This morning I get on and it is doing the same thing, but it is limited to the Calendar. Anything I try to do in the Calendar gets me the spinning beachball, from opening it to editing to adding an event. I have many dates and events saved that I don't want to lose. Am I going to have to reinstall the Calendar? If so, how can I do it without losing my content?

This is the note I sent to the other thread (Macbook is slow since OS X 10.10.3. I'm sorry. I hope this helps
I did not have a specific category that said "log list" once I got to "All Messages". It just showed "Log" so that is what I am sending you. The other thing is that the timestamp is 9:23:?? the next is 9:34:?? and the problem occurred at 9:32:??. So you are getting the log from 9:23 until it repeats.
Apr 13 09:23:49 -MBP com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Apr 13 09:34:43 -MBP hidd[96]: IOHIDEventQueue unable to get policy for event of type 11. (e00002e8)
Apr 13 09:34:47 --- last message repeated 83 times ---
Apr 13 09:34:47 -MBP spindump[1465]: Got xpc error message in libspindump client connection: Connection invalid
Apr 13 09:37:56 -MBP apsd[73]: Failed to initialize budgeting, not using budgeting: Error Domain=Timed out waiting for XPC and/or reply handler Code=104 "The operation couldn’t be completed. (Timed out waiting for XPC and/or reply handler error 104.)"
Apr 13 09:37:56 -MBP apsd[73]: apsd(73,0x7fff7a8d5300) malloc: *** error for object 0x7fd5e0c43ef0: pointer being freed was not allocated
  *** set a breakpoint in malloc_error_break to debug
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.Finder[221]): Service exited due to signal: Terminated: 15
Apr 13 09:38:29 -MBP kernel[0]: process Messages[57790] caught causing excessive wakeups. Observed wakeups rate (per sec): 115; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45001
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.ReportCrash[57808]): Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash
Apr 13 09:38:29 -MBP ReportCrash[57808]: Invoking spindump for pid=57790 wakeups_rate=115 duration=392 because of excessive wakeups
Apr 13 09:38:29 -MBP com.apple.xpc.launchd[1] (com.apple.imfoundation.IMRemoteURLConnectionAgent): The _DirtyJetsamMemoryLimit key is not available on this platform.
Apr 13 09:38:29 --- last message repeated 1 time ---
Thank you for your times!

Similar Messages

  • Keyboard issue I have a iMac thats about 4 years old, and now the keyboard is not working properly. some keys do not work. Any suggestions ?

    I think I may have a virus! My keyboard is not working properly. When I press the zero key, it doesn't appear. Other keys that do not work include the directional keys, delete key, and others. I tried everything that I can think of to fix it, but nothing sesems to be working. Should I bring the keyboard and=/or the entire computer into my local Apple store+? see, the +? appears before the question mark, and I didn't put it there! Thanks!

    No need to take the computer at this stage.   Just take the keyboard into your local Apple store for examination.   If you have another machine, not necessarily Apple, you could try the board on that or perhaps a friend's machine … they are largely universal.
    You do not have a virus.

  • When I upgraded to Fire Fix 7X or higher some PHP pages I programmed do not work properly. Please see details below.

    I have some PHP pages I have programmed that do database inserts and updates. I am using Dreamweaver and an extention package called InterAkt MXKollection to enhance some features on the web page. In particular some fields on the page use what is called KTML Rich Text Editors. In Firefox versions 3X to 6X all the fields work for an UPDATE post to the database. When I upgraded to Fire Fix 7X or higher only the first RTE field posts any changes and the rest of the form fields do not post any changed content. I know this is a browser issue because it all works in IE 7 and 8 and when I uninstall Fire Fox 7X (and higher) and revert back to the earlier Fire Fox versions (6X and below) the page works correctly. Also there is a dependent dropdown menu set on the page and it too breaks from FF V7X and on. It seems that something in the browser is not allowing all the functions in my page to take place in the newer versions. I can provide proof if needed.

    Hi!
    We focus in end-user help. If you are having development questions, you will have better support in http://developer.mozilla.org

  • I have to use a wireless mouse with my MacBook Pro because the touchpad does not consistently work.  Now, the wireless mouse is not consistently staying connected.  Any ideas??

    Why doesn't my Apple wireless remote remain connected?  It is frequently giving me a "lost connection" signal and since the touch pad works intermittently it has become frustrating.

    Hi at eeze,
    If you are having issues with your wireless mouse, you may find the following article helpful:
    Apple Support: Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Regards,
    - Brenden

  • I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion. I am facing following messages.

    Hello Team,
    I have upgraded My leopard to Mountain lion 10.7 via snow leapeard. Now My itunes is not working properly nor I able to install google chrome successfully. Please help me in this occasion.
    Also, I am not being able to upgrade Mac OS X 10.7 to 10.7.4 or letest for lion.
    I am facing following messages when I open itunes ( I down loaded and install new for 10.7)
    Process:         iTunes [463]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.7 (10.7)
    Build Info:      iTunes-10702101~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [273]
    Date/Time:       2012-10-22 23:33:07.226 +0200
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          4918 sec
    Crashes Since Last Report:           2
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      3DE933E2-7A48-4840-91F4-7DC466ED9C26
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
    Binary Images:
           0x102a96000 -        0x103c36fff  com.apple.iTunes (10.7 - 10.7) <0CC47E12-134F-A9E1-7E4F-3EAC797C3050> /Applications/iTunes.app/Contents/MacOS/iTunes
        0x7fff62696000 -     0x7fff626cb1ff  dyld (195 - ???) <71093406-21CF-3DBE-A001-802259ED5300> /usr/lib/dyld
    Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
    Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
    Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 2 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHY2160BH, 160.04 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-867
    USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc52f, 0x1d100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x022a, 0x5d200000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    And Google chrome just keep loading the page for hours and nothing is appear on its browser. But safari and firefox working absolutly fine.
    In addition, I have reboot computer as well but it never worked. Please help me in this occasion.
    Eagerly waiting for your response on this issue.
    Best Regards,

    You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.

  • Hi Guys,  I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

    Hi Guys,
    I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
    Alex

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    The seller should have given you the original disk so that you can reinstall as needed. But it likely was a single-user license (which really means single computer) so you can only have a copy on one computer at a time. If the seller didn't give you the disk he is probably still using the software on his new Mac. Your best option to get any of the iWork apps to use in OS X 10.6.6 or later is through the Mac App Store. You can then install them on any Mac you have that has access to the Mac App Store using your Apple ID.

  • I have Windows 7 and PS Elements 10 and can't get the text button to work properly.  What can I do?

    I have Windows 7 and PS Elements 10 and can't get the text button to work properly.  What can I do?

    Try selecting the T tool and then doing a reset (see image below)

  • I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

    I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
    It might be a huge coincidence but the drive was working fine before i installed lion?

    Installing Lion would not cause the superdrive to stop working.  Are you unsure as to whether or no a cd/dvd is inside?  Something may be broken inside and you should consider bringing it in for service.

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • Accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help

    I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.

  • Upgraded to lion on my 2009 summer macbook pro, now no memory left. something is screwy ...please help an old lady out..

    upgraded to lion on my 2009 summer macbook pro, now no memory left. something is screwy ...please help an old lady out..

    By memory, do you mean space on your hard disk?
    If so, here is one resource:
    Freeing space on your Mac OS X startup disk
    Or do you really mean memory - i.e,, RAM?
    In any case, what occurs that makes you think your "memory" is gone?
    charlie

  • I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?

    I have updated iOS7 today via iTunes as I was not able to update it directly in the iPhone. After the update I restored the back up and now the iPhone is not getting started. Please advice?

    That error message suggest you have a permissions issue. Make sure you have full read/write privileges for the Drive/ Folder location that you are copying the files to. 

Maybe you are looking for

  • FWs Nav Bar - Make Hyperlinks

    Hi I am currently making a website and I have created a nav bar in fireworks using slices and pop-up menus etc. Anyway I have imported it to my website in Dreamweaver, but I cant figure out how to make a hyperlink from the from down and nav bar butto

  • Font is blurry, works if I go into firefox "Safe Mode"

    It's not the font on the text that I type with, but the Address bar, Bookmarks(Include the images), so everything above the tabs(Include the tab text/images), and the right click menu. If I go into Firefox safe mode it all works fine, I have tried to

  • How can I get a log of conversation with Apple Support Chat ?

    How can I get a log of conversation with Apple Support Chat ? Case ID: 52****250 <Edited By Host>

  • KE5Z Vs 2KEE - Profit center Reports

    hi, Could anyone explain me the difference between these two reports Profit center reports KE5Z and 2KEE. KE5Z is line item report and 2KEE is Totals report. I would like to know the diffrence especially with refernce to a report painter report. I ha

  • Best way to import closed captions

    BACKGROUND: We record "webinars" using Microsoft LiveMeeting. They are available for download as Windows Media Video (WMV) files. Our government agency-approved contractor provides captions embedded in the windows media video, and they also provide a