I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough

I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough

I think you're using a Lion developer version. Open  > About this Mac > More Info, and copy Software here. Did you purchase Lion in the App Store?

Similar Messages

  • I updated my ad to iOS 6 and now my App Store app does not work, how can I get it back

    I updated my iPad 2 with the latest iOS 6 and now my App Store application does not work right.  The only part that does work is the genius, and the purchased, but I cannot search for any new apps now have the categories come up.  I don't know how else to search for apps, and I don't know how to download this as it was pre installed.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • I have changed from pc to mac and photoshop elements 2.0 disk does not install on mac

    I have changed from pc to mac and photoshop elements 2.0 disk does not install on mac

    Hi keltystu,
    You are doing 2 things wrong:
    1. you are trying to run EXE file(installer) on MAC
    2. You are trying to run a very old application on latest configuration which is not compatible and may not fulfill the appropriate requirement.
    Thanks
    Kapil Malik

  • HT4623 I updated recently to the latest IOS but now the websites screen of Safari would not go widescreen when I put it side way, why? Please fix bug.

    I updated recently to the latest IOS but now the websites screen of Safari would not go widescreen when I put it side way, why? Please fix bug.

    During a normal install of iOS 7.0.6 this does not happen but something clearly went wrong in your installation.
    To fix this, connect to iTunes and restore to Factory. Hopefully your iPad will be working again and you can restore your iCloud backup during Setup.

  • HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

    why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

    Hi lgmmo,
    I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
    A quick Chat session should get you fixed up.
    Please let us know if you have additional questions.
    Best,
    Sara

  • HT4623 I uploaded IOS 7 and the feature to forward text messages is no longer on my phone

    I uploaded IOS 7 and the feature to forward text messages is no longer on my phone how can I correct this issue? Thanks

    Long-press on the message and then press More. Then select the message to forward and then press the blue arrow in the bottom right corner.

  • I have i5 now battie does not last long sense you latest up date

    i have i5 battie does not last long seses the lastest up date

    I'm sorry but your post doesn't make much sense in English. You may want to try posting again in your native language.
    Best of luck.

  • I am trying to sync my songs in iTunes to my iphone4S, its running on IOS 7.3( the recent update) it just does not sync. I can see the songs in my library but they just don't transfer. Please help!

    I am trying to sync my songs in iTunes to my iphone4S, its running on IOS 7.3( the recent update) it just does not sync. I can see the songs in my library but they just don't transfer. Please help!
    I have Macbook Pro running latest Mavericks with latest version of itunes as well.
    I have tried coiple of options which were posted here in discussion forum but none of them worked out for me.
    Any help would be appreciated.

    connect device and open itunes navugate to music and click the box that says all music library and click sync or apply bottom right corner

  • JAN 4, 2012  As of the  Upgrade to   Lion,. and the  Email portion, ..   DOES NOT  allow a Video Clip to be sent via the Email  as the I-Photo is not supported by Video Clips  ( Previous Leopard  No problem  clip and drag  via Quick Time Pro to the email

    JAN 4, 2012 
    As of the  Upgrade to   Lion,.   2007  I-Mac  -   the  Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email 
    as the I-Photo is not supported by Video Clips  ( Previous Leopard ) 
    No problem  clip and drag  via Quick Time Pro to the email  and select the  Attchment  size to send. .  Depending on the 
    Size of the Video Clip  ..      Now  Lion only  Export's   1 size, .   only  and as a result . . teh  File is  TOO  Large and
    Will NOT  send via  E-Mail    ??? 
    Between the   Issue of   the   Lion,  and  Email  issues ,   and  the   Upgrade  of   I-Touch  to  5.1  from  4.2.1 
    as my  Photo  Size is  Huge ..    70,000  +  photos in the  Computer. .   and was   40,000  in the   I - Touch  .. .  
    The  New I-Touch  too will not Load the  same  as Previously  used  on  either  my  16 GB   or  32 GB   Unit . . 
              No Help . ..   so far, ..  as a Apple user   since   1996 ..    I  have Never  experieanced such  frustration    ??? 
                   (  any one have some help  if similar  experiances    ?     thank you     )

    JAN 4, 2012 
    As of the  Upgrade to   Lion,.   2007  I-Mac  -   the  Email portion, ..   DOES NOT    allow a Video Clips to be sent via the Email 
    as the I-Photo is not supported by Video Clips  ( Previous Leopard ) 
    No problem  clip and drag  via Quick Time Pro to the email  and select the  Attchment  size to send. .  Depending on the 
    Size of the Video Clip  ..      Now  Lion only  Export's   1 size, .   only  and as a result . . teh  File is  TOO  Large and
    Will NOT  send via  E-Mail    ??? 
    Between the   Issue of   the   Lion,  and  Email  issues ,   and  the   Upgrade  of   I-Touch  to  5.1  from  4.2.1 
    as my  Photo  Size is  Huge ..    70,000  +  photos in the  Computer. .   and was   40,000  in the   I - Touch  .. .  
    The  New I-Touch  too will not Load the  same  as Previously  used  on  either  my  16 GB   or  32 GB   Unit . . 
              No Help . ..   so far, ..  as a Apple user   since   1996 ..    I  have Never  experieanced such  frustration    ??? 
                   (  any one have some help  if similar  experiances    ?     thank you     )

  • I don't received codes and  the magic wand of PS does not work

    I don't received no codes, now I can't no use LR
    the magic wand of PS does not work

    We can't know. You have not provided any useful technical info about your system or other details. If you bought the photographer's bundle for Creative Cloud then there are no serial numbers. Refer to this:
    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • TS1453 after itunes upgraded to latest 11.0.2.26 apple tv (1st gen)does not show up anywhere in itunes

    After Itunes upgraded to latest version 11.0.2.26 Apple TV (1st gen) does not show up anywhere in Itunes

    I have the same problem. It was working fine up until the last update for iTunes 11.0.2
    Here's the details:
    I have an Apple TV - first Gen and up until a couple of weeks ago, was regularly playing sync'd iTunes music and videos through it on a daily basis.
    I see other devicess showing up in the "Devices" list in the left panel of iTunes (such as iPad, iPhone, etc.)
    AppleTV used to be there consistently, then disappeared upon update to 11.0.2
    Apple TV also does not show up in the devices tab under the Preferences window.
    I have tried multiple suggestions on the support forum but none have worked.
    Apple TV is able to access the network, is on the same network as the iMac with iTunes library connected. Both are connected to network via ethernet cable (not wifi). Both are able to access the internet (apple tv plays movie prieviews and gets updates). Using the Terminal app, I am able to ping the apple TV's IP number from the iMac and get a successful return. 
    Both have latest software downloads.
    I have tried cold-booting the apple TV, resetting the router, and verified in the router device list that both imac and appleTV are listed as active, un-blocked connections.
    I don't intend to buy an Apple TV 2nd gen or later (since I bought this one and it's not working now due to software update, what guarantee that a later model won't generate the same problem later.
    One last wrinkle, I have a 2 year old and a 5 year old who are jonesing hard for their "dance party" fix.
    Have you ever wronged a two year old?
    It is NOT pretty.
    Help me Apple-wan-kenobi...I can't take the screaming!

  • I have win 7 pro and the download for jre 7u10 does not work on Firefox17, I have installed and uninstalled, but works on internet explorer.

    I have uninstalled jre7u10, the latest version of java, and re-installed this several times and it will NOT work on Firefox 17. I have checked that the plugins are downloaded in the add-ons tab and made sure they are Enabled. I have tried disabling every plugin I have on the page, but it still will NOT run on FF 17. So, I have uninstalled jre7u10 in windows control panel. I got the jre7u10 download for windows 7 from the actual java website.
    I don't know what else to do. I am totally confused as to why it works on Internet explorer but not Firefox 17. It gives me an error message on a chat window on one of my sites that says error client class not found, But I DON'T get this error when I use Internet explorer because the chat window works with it. HELP PLEASE ???????????
    I am not that good with computers so take it easy on me please.
    Thanks in advance

    I questioned that 64 bit version thing and when I checked the download it sent me to the java version 32 bit for windows 7. The download of jre 32 bit works for my computer on internet explorer but not for firefox 17. I also checked firefox and there is not a 64 bit version browser. so I don't get this at all. anyway, I don't know what a 64 bit vs a 32 bit means but someone asked me to check that too on the site I went to they thought it might be different browser. It's not.

  • Hi. I have a website that uses Virtuemart and the 'add to cart' feature will not work in Firefox but will in IE. I am running XP and 'Accept all cookies' is enabled. HELP, PLEASE... Thankyou

    I am testing our website :www.winningsportstips.com and we have Virtuemart installed and the site will not allow me to select 'add to cart' feature. However if I open the website in Internet Explorer, the feature is available and it functions correctly. I am running XP and have 'accept all cookies' enabled in settings.
    Can you give me any clues? Thanks , Vern Nowland

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • Ipod touch is frozen and the home/lock button combination does not reset it

    The ipod is not responding. I tried holding the lock/home button combo for more than 30 seconds. The screen will go turn all white then all black every five to ten seconds during the reset procedure. I hooked up to the PC and it did sync with computer. Since the display does not work, I cannot do anything else with the ipod. Please save me. My daughter is very upset. 
    I updated the OS very recently and I am sure it is the latest but I cannot see the ipod. Itunes says it is current though.

    iPhone and iPod touch: Frozen and unresponsive
    When iTunes doesn't recognize the iPod, try disabling a/v software and turning off the Firewall on the PC.
    Disable antivirus software
    Turn Windows Firewall on or off

Maybe you are looking for

  • So I have a 30 GB Video iPod----

    I am pretty technology challened but I already have used a lot of space- Is there anyway to get the 60 GB iPod without having to buy a completley new one? Can you tack on more space? Please help it would be much appreciated!

  • Automator Folder Actions - Use filename as subject in email

    I regularly email .pdf atttachments to my head office. These are hand-written sales orders which are scanned in. The scanner software gives each file a sequential filename (eg. OrderNo_110612). I have set up a Folder Action in Automator to create a n

  • Migrating from NT to UNIX (Tru64)

    Please refer to statement "... With regards to import/export, Import/Export Utilities currently will <B>ONLY<B> work between portal installations which are at the <B>SAME VERSION LEVEL</B>." in the following thread - http://technet.oracle.com:89/ubb/

  • Patch and administer oracle with different user id other than "oracle" user

    Hi Friends, This is question about oracle on Windows. Can we patch and administer all parts of oracle with differnt user id than one from which we installed? Example, If we install an oracle from user "oracle" than can we install patches or other adm

  • Airport slow after update plus sometimes fails to connect?

    I updated my PowerBook G4 1.25GHz to 10.4.11 and initially though everything was OK, but now I am not so sure? On a number of occasions when I have turned on the PB I find it has not connected to my wireless router. If I select the router to connect