I have upgraded to snow leopard 10.6.3 version and it will not open mail it says i cant use this version of mail 3.6

I have upgraded to mac os x snow leopard but it doesent let me open mail it says i have mail 3.6 so i tried to download a larer version of mail and i havent got space.

While the minimum free space some quote of 4GB or 10% in actual practice you want more like 10-15GB minimum and that doesn't mean it will perform as it should, only that it may be able to function at all. 20% free space, but none of that means that your free space is large enough, or that the pieces of free space may be so small as to still not allow writes.
The worst is when it is no longer possible to update the index to the drive directory of where files and fragments are located.
Last, good idea when moving to a new OS, to backup/clone your drive, erase and install, then use Setup Assistant, as in going from 10.5 to 10.6. It may seem like you or others can "get away" with avoiding formatting a drive. In practice, you want to be safe rather than sorry. And the only time to insure the partitions are aligned and healthy and no bad sectors, especially those contained by the OS that are hidden.
Swapping out hard drive, moving your drive to an external case kit can be found here:
http://www.macsales.com/firewire - has all types

Similar Messages

I just downloaded Snow Leopard to my Mac Book, now my ICalendar says I cant use this version of iCal with this version of Mac OS X, i currently have ICal 3.0.8.....what do i need to do?

I just downloaded Snow Leopard to my Mac Book, now my ICalendar says I cant use this version of iCal with this version of Mac OS X, i currently have ICal 3.0.8.....what do i need to do?

Your profile shows you are running Snow Leopard. Put the Safari version you now have into the Trash. You need to reinstall Snow Leopard.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I use LR5 on my Mac Desktop (Yosemite 10.10.1) and it works fine. I have downloaded LR5 to my new MacBookAir (Yosemite 10.10.1) and it will not open. Message says program in running on too many computers. I once had it on another MacBookPro (Yosemite 10

I use LR5 on my Mac Desktop (Yosemite 10.10.1) and it works fine. I have downloaded LR5 to my new MacBookAir (Yosemite 10.10.1) and it will not open. Message says program in running on too many computers. I once had it on another MacBookPro (Yosemite 10.10.1), but no longer use that computer and LR5 does not show up in the applications.

What is the exact complete word-for-word error message?
Is this the Creative cloud version of Lightroom or the standalone (also called "perpetual license") version of Lightroom?

I have downloaded a language app and it will not open. it says it is downloaded

i have downloaded a language app for learning Spanish. It shows that it is downloaded, but it will not open. I must be missing a step but not sure what I have not eve got to the point where I put in the username and P.W.

What happens when you try to open it?

Upgraded to 0SX Snow Leopard and now mail is saying can't use this version of app mail. i have mail 3.6. HELP

I UP DATED MY MAC TO SNOW LEOPARD AND NOW MY COMPUTER IS TELLING ME I CAN'T US THE APP MAIL WITH THIS VERSION. I HAVE MAIL 3.6. PLEASE HELP

In Mac os 10.5.8 firefox will not open at all. Updated latest version, used time machine to get back to older version and still will not open. Have to force quit with message Firefox not responding

Crash reporter fails as well. Says report cannot be forwarded to Apple.

Hey kbroch,
Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
There is also a lot of useful stuff in the [https://support.mozilla.org/en-US/kb/Firefox-not-start Firefox won't start] Knowledge Base article. If you've recently upgraded, you might want to check out [https://support.mozilla.com/en-US/kb/latest-firefox-issues#w_firefox-crashes-when-i-start-it this article] as well.
Hopefully this helps!

Have upgraded to Snow Leopard. Pages icon still there but wont open, and i cant open my pages docs. Any ideas

Have upgraded to Snow Leopard. Pages icon still on dock but wont open. Also I cant view my documents. Do I have to buy Pages from ITunes? Thankyou

Good, use the disc. Also do the software updates. You can download from here http://www.apple.com/support/pages/
and you don't need the Pages 4.1/ iWork 9.1 I downgraded from iWork 9.1 to iWork 9.0.5.

I am new to mac's and have upgrade from Snow Leopard to Lion but......

I am new to mac's and have upgrade from Snow Leopard to Lion but not all my application will work. Is it save to reinstall using original snow leopard dvd and does it wipe all my other application like apature? I am in a panic over this, any help!!
I came across this online and i want to know is it safe to do this:
Backup your User folders to an external drive. This should preserve your documents, photos, music, etc. If you store those things in locations not in the User folder, make sure to copy those over too.
Insert the Snow Leopard disc. Restart your Mac and hold down C to boot to your DVD drive.
Go to Utilities in the menu bar once the installer pops up and select “Disk Utility.”
Find the drive in the sidebar where Lion is installed, select it and navigate to the Partition tab.
Click on the drop down menu under Partition Layout and select “1 Partition.” Hit Apply.
Now navigate to the Erase tab and make sure “Mac OS Extended (Journaled)” is selected, then hit Erase to delete all data on the drive.
Quit Disk Utility to get back to the Snow Leopard installer and proceed with the install.
Restore your User folder and documents from your backup.
Run Software Update to get everything current, install your apps from your original install media and update those as well.
if any one can help me that would be great, thanks Mike

Before you do that why not do this first:
Repair the Hard Drive and Permissions
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
To boot from the Recovery HD restart the computer. After the chime hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
If this doesn't help, then you can proceed to reinstall Snow Leopard as follows:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
This will erase the drive so be sure to backup your files before doing this.

How can I format my intell based imac without the original Tiger discs? I have a user account on it that I dont want. I have upgraded to Snow Leopard but I want to to star affresh. Thank you.

How can I format my intell based imac without the original Tiger discs? I have a user account on it that I dont want. I have upgraded to Snow Leopard but I want to to start affresh. Thank you. I have tried loading the Snow Leopard disc whilst holding down th C key but it goes straight into install mode. I am new to Macs and I have inherited this machine.

Hello, many options...
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
   2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
      *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
   3. Click the Erase tab.
   4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
   5. Select your Mac OS X volume.
   6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion do a new install.
Or...
Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
In the same pref pane highlight your old account, click the little minus icon, then use Disk Utility to Secure Erase Free Space.

I have upgraded my snow leopard to mavericks. Now I want to install the snow leopard in a hard disk partition. But the mac refuses to start the installation app on the snow leopard dvd. What to do?

I have upgraded my snow leopard to mavericks. Now I want to install the snow leopard in a hard disk partition. But the mac refuses to start the installation app on the snow leopard dvd. What to do?

Restart the computer with the disk in the drive and the C key held down.
(107242)

HT6065 I upgraded from Snow Leopard to Mavericks OS X, and lost all of my "on my mac" mail boxes. How do I restore them?

I upgraded from Snow Leopard to Mavericks OS X, and lost all of my "on my mac" mail boxes. How do I restore them?

The answer was more complicated. I had to have an Apple Care tech help me onscreen. Had to go to Time Machine to restore (which I had tried, but couldn't find the right files to import. The Mail icon was barred). They helped me find them. It was very complicated, with many steps involved. I never could have figured it out on my own. Even the tech was not sure how, or if it would work. And it took about 1/2 hour for the stuff to download. But, the problem was solved eventually
. Thanks again for your help!

If I upgrade from Snow Leopard 10.6.8 to Mountain Lion, will I lose Microsoft Office and iMovie?

If I upgrade from Snow Leopard 10.6.8 to Mountain Lion, will I lose Microsoft Office and iMovie?

Check to make sure your applications are compatible. PowerPC applications are no longer supported.
Application Compatibility

I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick. My iTunes will not open because it says i need a 64 bit version. Already followed the promted instructions but no luck. Any suggestions??

I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick. My iTunes will not open because it says i need a 64 bit version. Already followed the promted instructions but no luck. Any suggestions??

Oh, you do have the C2D! That's great!
I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.
Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
Well, that's about it..
I hope that something I've mentioned can help you achieve your overall goal.
Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
Best Regards,
mm~

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

I have been using Elements 12 without a problem for 9 months. Now when I try to open the program, I get an error message "Adobe Photoshop Elements 12 quit unexpectedly" and it will not open at all. What can I do to open the program?

Thank you for responding. Nothing actually worked! After reading the posts online, I called Apple. They indicated they have seen problems with some software after their upgrades. The technician was able to fix the problem on my computer remotely, but I have no clue what he did! But, it was definitely related to their recent upgrade to my computer.

I have a laptop using OSX 10.5.8, iTunes v. 10.6.3 and Quicktime 7.7. iTunes will not open. It says it requires QuickTime 7.5.5 or later. I've tried reinstalling each of them. No success. Don't know what to try next.

I have a laptop using OSX 10.5.8, iTunes v. 10.6.3 and Quicktime 7.7. iTunes will not open. It says it requires QuickTime 7.5.5 or later. I've tried reinstalling each of them. No success. Don't know what to try next.

QuickTime 7.5.5 for Leopard - http://support.apple.com/kb/DL27
QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
= New version of Quicktime installed but application reports it needs to have that version installed =
Open Application > Utilities > System Profiler and check the Quicktime version in Frameworks vs. the version in Applications. One person had re-installed their operating system. It had kept the newer Player application but had reverted to an earlier version of the underlying support framework files which many applications utilize. Re-installing Quicktime 7.7 took care of the problem. Do this manually, not with Software Update.
Installation get stuck at "configuring installation" - https://discussions.apple.com/thread/2592979?threadID=2592979 - uninstall Quicktime before installing.

I have upgraded to snow leopard 10.6.3 version and it will not open mail it says i cant use this version of mail 3.6

Similar Messages

Maybe you are looking for