I have upgraded to the new Firefox but removed it because my DAP premium will not work with the new version. Am I doing something wrong?
DAP Premium seems not to be compatible with the new version
Dear Old Bob..I enjoyed that! I and thanks so much ...I would have done it if I could have done it but I was blocked by Photoshop at every stage! Thankfully my own IT Guru and friend came to the rescue remotely last night and has down-loaded it. But it took him quite a bit of time.
As XP is faded out, there will be an awful lot of people like me complaining.
But truth is my problems are only at a start! About 30 prints (some not yet on my 'blog' (juliamatcham.wordpress.com) all have varying settings which I have noted. Everything depends on these settings.
All are Apple RGB (although my computer is a PC) and they were all set for my printer Epson Photo 1800. Also they were set at varying settings...Standard or Vivid 1.5, 2.5 whatever suited the design.
These settings appear not to exist on CS2 which is a nightmare for me as each print was carefully proofed with a great deal patience and at some expense as in the end one has to use expensive paper even for proofing.
If you have any hints for how to translate these old settings...I would kiss your feet!
Just looking through how things work, I can't understand why I can't change my first printing option to landscape ...everything esle so far seems comprehensible.
I do hate change!
Meanwhile, thanks so much to Curt, Noel, Nahraka and Old Bob for cheering me on. I am obviously going to be back asking more questions about CS2!
Julia
Similar Messages
-
I need to download FF4.0 to get through my corporate firewall. All I can download is FF5.0 which will not work. How can I download FF4.0?
#A link to Firefox 4 versions will not be offered by any '''''responsible''''' contributor here, because Firefox 4 versions contain stability and security issues <u>that will not be corrected</u>. Firefox 4 is a thing of the past.
#The only currently supported versions that a '''''responsible''''' contributor here will offer are Firefox 5 and Firefox 3.6.18. Firefox 3.6.18 is currently scheduled for support for only 2-3 more months, then it, too, will be a thing of the past. Firefox 6 will probably be introduced about the time the Firefox 3.6.18 support is discontinued.
#To downgrade to Firefox 3.6.18, follow these instructions '''''very carefully''''':
#*Back up your personal information (bookmarks, passwords, etc.) before proceeding just in case something goes wrong: https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
#**'''''If you need to''''', see the following article. See the last 2 sections "Copying files between profile folders" and "Your important data and their files" to restore important information '''''if something goes wrong in the downgrade''''': https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
#*Download and SAVE Firefox 3.6.18 to your Desktop, then proceed as in the "Clean re-install" article below: https://www.mozilla.com/en-US/firefox/all-older.html
#*Clean re-install: http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
#*You may also need to reset your extension databases in your profile folder. Do the procedure after locating your profile folder (see "Back up your personal information" above) and closing Firefox. The files will be automatically re-built when you re-start Firefox: http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Corrupt_extension_files -
Firefox 4 will not work with my OSX 10.4.11. I cannot now get back the old version. what can I do?
Just downloaded Firefox 4. It replaced the older version on my mac but will not work with my current version of OSX.
I cannot find where I can download the older version so now I do not have Firefox. Can you help>Perfect! This works!!! Mozilla... remember many Mac users keep machines a looooong time! They are like an old Mercedes. They never die.
-
I have got the new iPhone 5 and the iOS inside is suppose to have the facebook integration, i have upgraded to the latest version, now i get the facebook option in my notification centre, but i thougth i was going to get all the notifictaion , but sadly i have to log on to fb application to get all my notification updates , nothing is notifyied to me , is there a way to make this happen ??, if yes please help me out , i have tried all the options but doesnt seem to work im afraid ..
Good.
Three things come to mind:
1. I think you're implying when you travel away from your home to a more populated area, the cellular coverage improves and your iPhone works well. Is that right?
2. Do you have a case or some other obstruction over or near your iPhone's antenna? Have you tried moving or removing any possible obstructions near the antenna?
3. AT&T has a (free) app in the App Store called "Mark the Spot". You can use this app to report voice and/or data issues to AT&T, as well as keep up on progress they may be making in improving coverage in your area. Your trouble reports are geotagged (if you wish). -
Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1. I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??
Is your computer still authorized in the Store menu in iTunes?
iTunes Store: About authorization and deauthorization
When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
Did you try to deselect Wi-Fi syncing and enable it again after that?
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
Did you already transfer your purchases and manually started a backup? -
I have backed up my old phone to itunes, however, when I try to restore data to my new phone it is saying the password is incorrect but I can get into my itunes account with my password so I am doing something wrong?
I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)
-
Hi
I am having problems with my old computer so syncyed my ipod to my new computer. all the appliance/games synched but not my music. I have somehow manged to wipe all my music from my ipod and it will not synch with my music libary from my old computer. Any suggestions.? Anyone have any suggestions?
-
I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.
Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software. -
I have upgrade my iphone new version so please let me know how can possible install my message
i have upgrade my iphone new version so please let me know how can possible install my message
What messages? I am guessing you mean messages as the iPhone does not provide massages.
Try posting in your native language. -
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?
You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html
-
I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?
I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!
-
Can't load XRE function error. I uninstalled Firefox but now it says my security setting will not allow me to install Firefox.
See:
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
*[[/questions/880170]] -
I was logged in to reply in the thread "Firefox will not work with paypal". I spent the better part of an hour carefully composing that reply, testing cases, providing links, etc... [Hint: Firefox, unlike other browsers, has a problem with scripts from server paypalobjects.com.] Because I had taken so long to compose the reply, it seemed like a good idea to check it via the Preview button, but I got a message that that function was not available. Of course I decided to submit it anyway, but when I hit "Submit" I got a message "You don't have permission ..." - at which point I was (stupidly) on a different page with that message, and everything I had composed was gone!
It might be too late for this, but it's what I use when this happens. Prepare for deep nerdom:
* Open the web console below the error page by pressing Ctrl+Shift+k
* Right-click the blank area and turn on logging of the request and response bodies
* Resubmit the request by clicking the reload button
* Click the new URL that appears to open the viewer showing the headers and bodies
There you may be able to copy out the content of your post from the Request Body. You can use a word processor or text editor to find/replace the + characters back to spaces. -
My old e-mail address was SHAW XXXXX.and worked very well with Thunder Bird mail. I recently switched to new ISP Bell and my new address is XXXXXX However with several attempts with techs ,Thunder Bird will not work with my new ISP. I had to start using Outlook.com and Outlook Express 6 for e-mail,but I really liked Thunder Bird and have numerous e-mails stored in it that I cannot import.
Outlook Express 6 is outdated and because I am running Windows XP it will not give me a newer version.I find Outlook.com confusing to me. Can you helpWhy don't you tell us what you did and why it didn't work? Start from File/New/Existing Mail Account, enter your details, click Continue, then immediately click Manual config. On the next screen enter these settings:
incoming POP server: pophm.sympatico.ca
port: 995
Connection security: SSL/TLS
Authentication: Normal password
User name: your full email address
outgoing SMTP server: smtphm.sympatico.ca
port: 587 (or try 25)
Connection security: STARTTLS
Authentication: Normal password
User name: your full email address
http://support.bell.ca/Internet/Email/How-to-use-Bell-Mail?step=3
Also, enable POP access as mentioned in the link.
Maybe you are looking for
-
I am trying to place .ai file in InDesign CS2. while placing the image right side shows some white space. How to remove the white space using javascript. please help me. Thanks in advance........
-
Hi, How to display left justified sign with currency field in ALV grid (eg: - 1,055.25)? The refernce filed or field type (data element type) should be currency field. Regards, Ramesh.
-
Customizing STYLE by each group
Hello, All~ I'm trying to apply a different skin/style to each user after user logged in. For example UserA login -> Blue look and fill Skin/Style UserB login -> Green look and fill Skin/Style So I copied default Skin and Style(s_oracle10/sk_oracle10
-
Unable to generate statistics for the table
I have got a staging table of more than 600 columns which has got range portioning. Size of the table is 4GB. The average size of the row is around 3 MB. I have created a Functional index on one of the column ABC VARCHAR2(50) and it has only number v
-
Trying to export on Final Cut Pro X
So, Final Cut Pro X is telling me that I need a compressor in order to export now. But then it says I also need to install that as well. What do I need to do? I just downloaded the new version 10.0, so I'm trying to adapt but does this mean I need to