I have v 10.6 and i make update to 10.8 but all my program is down i want to return back to 10.6

i have v 10.6 and i make update to 10.8 but all my program is down i want to return back to 10.6

Is there an update for the particular program you're using?
Niel's solution is simple. As an alternative that's a little more advanced, you could acquire and install one of the available virtual machine packages, and install OS X 10.6 into it. This will allow your existing program to run until it can be updated or replaced or migrated, and can remain with OS X 10.8 for the rest of your use; with the current OS X version.

Similar Messages

HT4623 i have a new email and password set up on i tones but it not coming on my phone it keeps going back to the old email i dont use it any more

my new email and new password is set up on i tones and not on my iphone 4 but under settins show my new email but my updates wont allow me to update it keeps going back to the old email and i dont use it any more

Did you change the email associated with your Apple ID or create a new Apple ID?
The former simply requires signing out of the iTunes store and back in with the new credentials.
The later is a waste of time as content acquired via iTunes is permanently tied to the Apple ID it was acquired with.

I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this??

I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this

You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4)

I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?

I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?

Create a new ID:
On the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into the other one. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into the other one. Make sure that under You can be reached at only the newID email address is listed
- Settings>iCloud and sign out and sign in with the new one
- Settings>iTunes and App Store and sign out your ID and sign in with the new one.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!

ME TOO. NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
iphone is diabled- connect to iTunes because i forget passcode.
i cannot connect iTunes because it's always asking to enter passcode on iphone.
So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
My iphone is new. No icloud. didn't connect to itune backage.
That's why I try to connect iTunes but it need to enter passcode.
So, my iphone just keep "iphone is disbled-connect to iTunes".
IPHONE 6 PLUS

I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

I suggest you get 9.2. You need to install the same or later version of the OS. One some computer the shipped version has extra drivers. The drivers will not be in the official release in this case 9.1. They would be in 9.2.
Mac OS 9.1 (Mac OS ROM 7.5.1) and Mac OS X 10.0.4 (4P13)
*blinking question mark*
The blinking question mark means that your mac firmware could not find a valid operating system
on one of your disk volumes.
Somethings to do to resolve the blinking question mark.
http://docs.info.apple.com/article.html?artnum=58042
Try holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key.
You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
What is firmware?
The firmware software receives control when you poweron your machine. It does some hardware testing and some hardware configuration then passes control to your version of Mac OS. It reside on a PROM ( program read only memory ) chip on the logic board.
Figuring out what level of firmware you have?
Open Firmware, boot into Open Firmware.
Power on your iMac while holding down command+option+o+f
The first output line contains the firmware level. Mine reads:
Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
Copyright 1994-2001 Apple Computer Inc.
On my machine, I have 4.1.9f1.
What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117
For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
http://docs.info.apple.com/article.html?artnum=75130
"The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
You can download the Mac OS 9 updates from the Apple site.
http://support.apple.com/kb/HT1387?viewlocale=en_US

I have an iPhone 4 and tried to update to iOS6 but received an error message when trying to restore. The phone is no longer recognised on iTunes (using my Windows PC). I have reinstalled iTunes but this has not worked. What can I do??

I have followed the instructions on the apple support pages and still cannot get my phone to work. It continues to show the iTunes USB picture and is not recognised on my iTunes on the windows PC. When I connect the phone to my iMac it shows no data and says I can restore to factory setting. However if I do this will all my data be erased? How do I get my phone and data back? I have saved most of the photos that were on the phone but all my contact details and messages are stored and I really need to get them back! Would have limited memory on the phone when trying to update caused this problem?

C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again.

I am trying to reapply for the FAFSA online for school but when I click the "start now" button it takes me to a page which says I have an incompatible browser and need to update my Firefox.

I have the latest version and I tried updating anyways, but it still won't let me access the page to fill it out. This is what it says "An Incompatible Browser Has Been Detected Your Web browser is not supported by our Web site. You must use a Compliant Web Browser - Standard* to view our site properly. We recommend you upgrade to the latest version of your browser according to your Operating System. "
This is what it suggests I do, and I did update but still isn't working.
Supported Mozilla Firefox browsers:
Windows XP - Mozilla Firefox 3.5.x and 3.6.x
Windows Vista - Mozilla Firefox 3.5.x and 3.6.x
Windows 7 - Mozilla Firefox 3.5.x and 3.6.x
Macintosh Operating System 10.5 - Mozilla Firefox 3.5.x and 3.6.x
Macintosh Operating System 10.4 - Mozilla Firefox 3.6
Instructions for upgrading Mozilla Firefox browser:
Click this link to access http://www.mozilla.com/firefox.
Click the "Download Firefox" button.
We recommend you use your browser's default settings to safeguard your application information and ensure that the Web site works properly.
....I need to have it filled out and posted by 9/1/11 so if i could get into the website it would be a great help. It takes a long time or I would go do it on another comp at the library or something. Any help would be appreciated:) thankyou

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

HT4623 I have a 3g iPhone and a new epson imprint compatible printer but the iPhone can't see it. I have downloaded all the software. Help

I have a 3g iPhone and a new epson imprint compatible printer but the iPhone can't see it. I have downloaded all the software.
But my phone does not recognises the printer. Can anyone Help? Thanks

to trouble shoot look here http://www.apple.com/support/iphone/assistant/airprint/#section_1

HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

I have an Ipad 2 and didn't update the 4.3.3, now when I try to update to 6 it keeps on coming up with an error.

I have an Ipad 2 and didn't update the 4.3.3, now when I try to update to 6 it keeps on coming up with an error. do i need 5 first? and if I do how do I update to 5?

What, Exactly, is the Error Message...

I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information. For instance, my email and phone number comes up under someone else's name (a thousand contacts)

I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information. For instance, my email and phone number comes up under someone else's name (a thousand contacts). I dont know how to repair this. what a nightmare

An icloud account is designed to be used by just one user. If you have given your ID or set up your account on someone else's device, then their data will be mingled with your or worse.

HT4623 I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doen's offer me another update!

I still have an iPad 1, and need to update to iOS 7 to use Keynote, Pages and Numbers but I get the message the my system is updated in iOS 5.1.1 and doent's offer me another update! How can I update it? Or I can't?

ayrosa wrote:
I still have an iPad 1, and need to update to iOS 7
Sorry... This is not possible. The iPad 1 can Only go as far as iOS 5.1.1

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks

You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser.

HT201269 My iphone contacts are not updating to Icloud, I can create a contact in Icloud and it will update to my phone but I cannot create a contact on my phone to have it update in the cloud, I am using Itunes as the bridge

My iphone contacts are not updating to Icloud or Outlook, I can create a contact in Icloud/Outlook and it will update to my Iphone but I cannot create a contact on my Iphone to have it update in the Cloud/Outlook, I am using Itunes as the bridge. I originally installed the Icloud manager to sync my contacts to Cloud/Outlook, but I did not like the functionality, when I uninstalled the Cloud manager and and installed Itunes I noticed that the none of my contacts in the phone updated to Outlook.
Thanks in advance.

Hi Cyclops12,
Welcome to the Support Communities!
The article below may be able to help you with this.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
Cheers,
- Judy

I have v 10.6 and i make update to 10.8 but all my program is down i want to return back to 10.6

Similar Messages

Maybe you are looking for