I have version 36.0; however, I continue to get notice it is out of date. What should I do now?
I will try this again, the dialog stated I did not have permission to access.
I refreshed FireFox because I was having some lag issues with the browser. After it was reset I now get the following:
"Looks like you’re using an older version of Firefox." FireFox
"You have been redirected to the basic HTML version because this browser is not supported. To use standard view please upgrade to a supported browser." Gmail
"Oops, your web browser is no longer supported.
YouTube works with a wide range of browsers. However, if you'd like to use many of our latest and greatest features, please upgrade to a modern, fully supported browser.
Find the latest versions of our supported browsers below." YouTube
I have version 36.0 and it shows my browser is currently up to date in the "About FireFox" (see attached photo).
Please advise
hi gibfish, your useragent (the information the browser sends to websites to identify its version) - apparently mistakenly - shows you're on firefox version 3.6.11. probably some sort of toolbar or adware has overwritten it.
please refer to this article in order to reset the user-agent settings in firefox: [[Websites say that Firefox is outdated or incompatible even though it's the latest version]]
Similar Messages
-
Should I be clearing my history and cookies? My I pad just started giving me the "could not open page" message and I am not sure why. Not very computer literate.
Do a FACTORY RESTORE...not from your back...
Make sure you DON'T allow iTunes to back-up your Ipad before this as it will Replace your back up with the funcky New app arrangement and soo on..
Now after the Factory restore, restart iTunes and do a restore from the Back-p. AGAIN don't let iTunes do a back-up prior to this... -
Question: on trying to install iTunes got the following message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services. I am this computer's administrator. What should I do now?
The most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562
-
I have version 10.6.8 and want to get icloud. How do I do that? Can I also upgrade to the lion?
I have version 10.6.8 and want to get icloud. How do I do that? Can I also upgrade to the lion?
Open the Mac App Store and try purchasing Mountain Lion 10.8. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Core 2 Duo(not Core Duo) or better CPU with at least 2GB of RAM, and if it does, phone the online Apple Store and order a download code for Lion 10.7.
(89791) -
I have an iMac model 4,1 running OSX 10.6.8. The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject. I have asked about this before and tried all all the suggestions I have received but I can not eject.
Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem. I still can not eject. When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
How do I solve this problem?Hi again Hal
Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
You have also tried resetting the PRAM as I suggestion in your other thread...?
See resetting the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys. -
HT5167 I have version 10.6.8, how do I get to OS X Lion v10.7.4?
I have version 10.6.8, how do I get to OS X Lion v10.7.4? It won't download.
If you go to the Purchases tab in the App Store, do you see Lion listed there? If so, does it show a progress bar, or something else? If it says there was an error, you may need to restart the download. Note that you need to keep your Mac on and awake while downloading... you may want to go to System Preferences -> Energy Saver and set it to sleep "never." Make sure your MacBook is plugged in, of course, and that you change the sleep settings in the Power Adapter tab, not for the battery.
-
I have a mac pro i bought in 2008. I keep getting prompted my start up disk is full. I have delted many files, however I'm still getting the prompt
Then your hard drive is full. You need to move large libraries to another location (like an external drive). Libraries like iPhoto, iTunes, and even iMovie Events, are very big space hogs.
iPhoto
Moving iPhoto Library - http://support.apple.com/kb/HT1229. and http://support.apple.com/kb/PH2506.
iTunes
Moving iTunes Music from one computer to another or an external drive - http://docs.info.apple.com/article.html?path=iTunesMac/8.2/en/15475.html and HT1449 - http://support.apple.com/kb/ht1449
iMovie
Moving iMovie Events to an external drive to save space see the following 2 articles:
PH2302 - How to move "Events Only" to an external hard drive - http://support.apple.com/kb/PH2302?viewlocale=en_US.
PH2289 - How to move "Projects" (and their associated events) to an external drive - http://support.apple.com/kb/PH2289?viewlocale=en_US&locale=en_US.
Also note, you can save space on your hard drive by deleting "Excess" unused video in your event folder - see the iMovie 11 help menu, and select the "browse help" tab. Under Manage Events, select "Delete all excess video from an event"
NOTE - ensure you are "Moving" the data, and not just "Copying" the data as per - http://support.apple.com/kb/PH2302?viewlocale=en_US. (hold down COMMAND while dragging to the external drive) for the best results and less chance of loosing data connection with the project -
I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA. I have another tool that puts data into HANA, So don't want to reload this new data into Lumira every time I want to run a report.
so do i have the ability to create polished ad hoc dashboards, reports, infographics and storyboards Apart from Ad-Hoc reports, I also need a dashboard with some fixed reports that update with the live data.
So please suggest me to accomplish this task.
Thanks and regards
Shashi kiranPlease have a look at Ludek's document here which contains links: SAP Lumira Family Supported Versions Matrix
Ludek has also attached the PAM's as zipped files; Lumira comes in many flavors so I encourage you to research options
Also see this "HANA Live" document: [SAP HANA Academy] Visualized: Lumira & HANA -
My Iphone will not let me download apps because it says my apple id is disabled, I have changed my password four times and it still is saying the same thing. What do I do now?
Contact iTunes to re-enable your account at expresslane.apple.com
You can reach them by chat or email. -
We started with an apple computer and set up 1 apple id and for music on iPods. Now we have 3 apple phones and want to share the music but keep our contacts separate. what should we do? Right now we have the same apple id on the PC, ipodtouch, ipod, and 3 phones. They said make seperate clouds?
Hello there MizzouTrojan,
If I understand correctly you want all 6 devices to have access to a single calendar that each device gets notifications for and can edit. You can do that with an private iCloud shared calendar. First sign into www.icloud.com and use these steps from the following article to share a calendar:
iCloud: Share a calendar with others
Share a calendar privately
Click the Share button to the right of the calendar name in the sidebar, then select Private Calendar.
Note: You can also share the same calendar publicly. For instructions, see the next task, “Share a calendar publicly.”
Type the invitee’s email address in the Add Person field and press Return.
Click the pop-up menu with the invitee’s name and choose access privileges (View & Edit or View Only).
For each person you want to share the calendar with, repeat steps 2 and 3.
When you’ve invited everyone and set their privileges, click OK.
Invitation emails are sent from your iCloud email address to the participants you specified.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
My apple tv seems to have hung up during the latest software update - what should I do now?
my apple tv seems to have hung up during the latest software update - what should I do now?
I have not turned it off but it has been stuck in the same spot for 30 minutes now and I'm not sure what to do next since the screen says to NOT turn it off until done. Please help.If it hangs much longer you may need to disconnect and then grab a micro USB to restore through iTunes
http://support.apple.com/kb/HT4367 -
I am trying to log on to iwork but it keeps saying that my password is incorrect. I have already reset it and entered my new password and it still is not working. what should i do?
I really can't comprehend the logic that leads to believe that password for old apple id will come to e-mail for new id. Buy may be I just misunderstood something. Contact Apple for assist with password retrieval. If you can verify yourself as account owner they may be able to help you.
-
My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?
Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario -
My iPhone was stolen in Asia and it's now in Germany. How do I get it back? All I have left is a serial number, apple ID and password, plus a police report. What do I do now? I really want my phone back. Can someone help me? Thank you, Bobi
No one here can help you, nor can Apple or any carrier. If you know the location, contact the local police where it is located.
Maybe you are looking for
-
Ink system failed Error:Oxc18a0101 on photosmart D7160
Changed the ink cartridges and got Ink system failure. Unable to print. Error: Oxc18a0101 Printer not that old and not used that much. Turned power off then on again did not help. Unplugged power and USB also did not help. Looking for help!!! Thi
-
Change (convert) delivery quantity
Dear all, Does anyone know how I can change the delivery quantity ? What we ant to achieve is the following: - an order has been created with a quantity in sales units for example 10 BAG - at creation of delivery, we would like to convert the sales o
-
How to zip multi files into one zip file in ABAP
hi all: As you know, ABAP has CL_ABAP_GZIP class to support zip file function. But it only support one file zip. If I want to zip two files into one zip file, how to do it? thanks.
-
Applying Currency conversion with respect to Date in WAD result
Hi Gurus, We have a web report with different currencies. Now the business requested to create a down drop with the dates as per the data when we load the exchange rates in TCURR table. So using the date on the web report, business wants to change th
-
Hi I ll get a digi cam to my birthday so i want to play the pictures on my Zen vision: M... Now i want to know how i can conect the cam to the Player OR to conect the CF card to the camerea... SO... can i get a "addon" 4 the Zen visio: M or is there