I have very slow Mail when I read PDF, it almost hang. watt to do?

Yes, and small PDF will also run OK, even in akrobat Reader is that problem but it is little betterthere. The size of the PDF is 6MB and is a mekanical drawing

Similar Messages

My Photoshop CS3 goes very slow/choppy when I have a selection made.

Hello,
My Photoshop CS3 goes very slow/choppy when I have a selection made, with those little moving lines indicating the selection (the lines that look like walking ants). When I'm adding to the selection, it's fine again, because the "ants" aren't moving, same with when I hit Q to enter Quick Mask Mode--as long as the "ants" aren't moving, my Photoshop isn't slow. Is there any way to fix this? To either speed up Photoshop or to stop the "ants" from moving, and simply allow selections to be indicated by broken lines, but not moving broken lines?
Thanks

Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
           Language: English (Regional Setting: English)
System Manufacturer: Tyan Computer Corporation
       System Model: S2668 Tiger i7505
               BIOS: PhoenixBIOS 4.0 Release 6.0
          Processor: Intel(R) Xeon(TM) CPU 3.06GHz (4 CPUs), ~3.1GHz
             Memory: 4096MB RAM
Available OS Memory: 3072MB RAM
          Page File: 2548MB used, 3589MB available
49.9 GB of 465 GB free.

I have a MBP 13 EArly 2011 in my laptop problem is when i shutdown my laptop and again start it its very slow and when i put my laptop on sleep and after five minutes everythings fine.Some body know about this problem???????

I have a MBP 13 EArly 2011 in my laptop problem is when i shutdown my laptop and again start it its very slow and when i put my laptop on sleep and after five minutes everythings fine.Some body know about this problem???????

You may find this user tip article helpful:
https://discussions.apple.com/docs/DOC-3521
Ciao.

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

Very slow response when I click on a link, but almost instant response if I go back and click a second time.

I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
Sincerely,
Al
Version 26.0 Firefox, Windows XP, sp/3

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Very slow start when initially entering the service ticket in Web UI (2007)

We seem to encounter a very slow start when initially entering the service ticket in Web UI (2007). Once in all seems speedy enough. I don't have my access arrange for the Service marketplace (OSS notes) yet so can't check if there is a known solution, which I suspect there is. Has anyone encountered this problem and possibly resolved it?.
Jason.

Previous posts have highlighted the following notes:
1048388 General Performance improvements of BSP transactions
1162605 Network performance for CRM 2007 Webclient
1162685 SAP CRM 2007 Webclient Performance
821045 Poor performance of MIME objects in BSP pages
581316 BSP Delta-Handling for CRM (BASIS 620 SP17)
However, I was wondering whether anyone has come across any other small changes that may have a major effect. A quick-win I guess you call it. From bitter experience I know there are rarely quick wins when it comes to optimisation due to the amount of re-testing etc.
But any further advice would be welcome.
Jas.

InDesign CC 2014 very slow performance when dragging images and changing text

InDesign CC 2014 very slow performance when dragging images and changing text.
Running on 2010 Macpro 2.4GHz. 8GB RAM. Any solutions? I've read through many forums on this and tried several fixes.

Have exact same issue on my Windows 7 machine. Resetting preferences is a workaround.
So I start InDesign whilst holding down these keys.
Ctrl + Alt + Shift (Windows) or Cmd + Ctrl + Opt + Shift (Mac)
Whilst inDesign is usable again with this fix- I have to do it every time so it trashes all my preferences so NOT GOOD long term fix. Otherwise InDesign freezes and can only be stopped by forcing a quit.
I have manually deleted the preference files and I have created a brand new admin account - but still no luck - will be onto support tomorrow

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.

Exchange 2013 CU5 , Exchange Power Shell very very very slow reasponse when using get command.
First my organize has Exchange on 2 site like
site A (internet facing) : 2CAS 2 MB all are Services pack1
site B (DR Site , no user active on this site) : 2CAS 2MB all are Services pack 1
so today I upgrade Exchange 2013 from SP1 to CU5 start on "site B" and I found this issue and the details is....
When I open EMS on any CU5 for query something (like get-mailboxdatabasecopystatus) the response return very slow and some query will not return at all (like get-owavirtualdirectory).
But If I using EMS on SP1. Everything is ok then I try to use EMS on SP1 connect to CU5 and try to query something. the result is
some query command cannot return for any result that are server on siteB (just some query command)
Problem
EMS on CU5 return very slow result.
EMS on SP1 still ok.
Does anyone face this problem before for CU5??? Please help me figure this out. Thank you
reply from Social.technet

Hi,
Have you used the above cmdlets to check your Exchange server health?
"all other command that I ran on EMS didn't logged on event viewer.", my environment is the same with you. I use Exchange 2013, only errors will be displayed in MSExchange Management. Actually, it is not related to slow EMS response.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

've never used a Mac before, recently i purchased a MBP13" which came loaded with LION OS by default. I upgraded the OS to OS10.7.2 when prompted. Now after the upgrade, my MBP feels very slow - specially when typing emails !! What is the solution ??

I've never used a Mac before, recently i purchased a MBP13" which came loaded with LION OS by default. I upgraded the OS to OS10.7.2 when prompted. Now after the upgrade, my MBP feels very slow - specially when typing emails !! What is the solution ??

After an update or installation, your MBP may take some time to index its files. Give it some time - but if you don't see any improvement, post here - you'll get an answer!

VERY Slow Respons When Changing Songs on iPod

My work computer is a Windows Vista machine, with Vista, SP 2 installed. I installed iTunes 8.2.0.23 this morning, upgrading from version 8.1.1.10. The new version works well when I play songs stored to the library on my hard drive, but I find that it has a VERY slow response when changing songs that I play from my iPod Touch. At one point, it took 17 seconds to change to the next song in the iPod's library. It changes instantaneously when I play songs from the library stored on my HDD. The iPod Software is version 2.2.1.
Can someone please offer insight?
Is there a way to download and install iTunes 8.1.1.10? I had no problems with that version.

Hi Ajrobin,
Welcome to Apple Discussions
[deleted because misread original post]
Jon
[btabz...funny...wait never... ;)]
Mac Mini 1.42Ghz, iPod (All), Airport (Origional & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..
Message was edited by: ~JB~

My firefox is running very slow, espically when I am typing, scrolling and in many simple activities. On the other hand my internet explorer is going normally like simple browser.

My firefox is running very slow, espically when I am typing, scrolling and in many simple activities. On the other hand my internet explorer is going normally like simple browser.

Hi,
Please try disabling all the features under '''Browsing''' in '''Tools '''('''Alt''' + '''T''') > '''Options '''> '''Advanced '''> '''General'''. You can later toggle the values to find an optimum solution. Please also [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u see this.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Page%20Info%20window Page Info] Tools (Alt + T) > Page Info, Right-click > View Page Info
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing Video without Plugins]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://developer.mozilla.org/en/Command_Line_Options#Browser Firefox Commands]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36 After Upgrading]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?

I have a problem. When exporting from PDF to PPTX error "unable to process the document in the module Save As file is not created." What to do?
Windows 7 64
PC

everything works on a laptop (

Finder is very slow, particularly when using network drive

I have a mid-2011 Macbook Air, OSX 10.9.4, and Finder is extremely slow, particularly when I am navigating my Time Capsule. First, a little history.
I have tried the fixes listed in these three threads:
(1) https://discussions.apple.com/thread/3358265?searchText=finder%20slow
(2) https://discussions.apple.com/thread/1324280?searchText=Finder%20is%20slow
(3) https://discussions.apple.com/thread/5495797?start=30&tstart=0
Second, my Time Capsule is new. I bought it to replace a WD MyBook that used to work really well, and then something changed. Unfortunately, I assumed that it was some problem on WD's side, so after a year or two of waiting to see if either WD or Apple issued an update to fix it, I assumed it was some kind of file system incompatibility (or other interoperability problem) that wasn't likely to go away, and just sprung for the Time Capsule. However, after getting all the files on the Time Capsule, the problem remains. So here's a rundown of what I experience:
When I navigate the directories on my Time Capsule, if I haven't been in a particular folder, it takes a very long time to load the contents. On average, it will be 30 seconds, but it is not uncommon for it to be over a minute. This can happen even if a folder is empty or has just a few files in it. In addition, adding a subfolder and trying to rename it takes a very long time. After renaming a new folder, it can then take another full minute or more for the folder to actually show the newly assigned name and bounce into line in alphabetical order.
Here are some other observations. First, my connection is very fast, as I'm directly connected to the Time Capsule (albeit via wireless). Second, there is clearly something extra going on in Finder that is contributing to this issue, because I navigated to different directories using Terminal and did an "ls" command, and as you would expect, the list fired out virtually instantaneously. Yet, right after that, if I clicked on that same folder with Finder, it would take a minute or more to display the same file names.
Could it be that the Finder is doing other things at the same time as it is giving me a list of what is in the directory? For example, could the Finder be loading ALL metadata for each of the files into some database or index being built on the fly every time I pop into a new folder, even if I'm not using a view mode where I am asking to see those other bits of metadata? If so, that might make sense as I generally am using the network drive to navigate directories of my photographs, and they have a lot more categories of metadata associated with them than do Word docs and PDFs (e.g., date of picture, time of picture, aperture, shutter speed, exposure, etc.). Or, perhaps is Finder trying to load previews of ALL of the files whenever a directory request is made, so that bouncing through the previews takes less time? I sort of doubt that, because even after a directory listing finally comes up, it seems to churn a bit on each photo before the preview comes up, which I take as an indication that it's creating each preview only after a request is made for that particular file. Either way, I will say that in old WinXP and even in the newer Windows 7, if you want to view files in a Detailed setting where you can see other metadata (called "Attributes"), it definitely prioritizes giving you a directory listing, and then continues filling in the various selected Attributes one-by-one after that. Thus, if you want to sort by the date a photograph was taken (as opposed to its modified or created date, which seem to be default attributes that load as quickly (or nearly as quickly) as the filename), or by the photo's dimensions, it might take a few minutes to load in those attributes for a folder of a couple thousand pictures. But, critically, if you are not planning on using those attributes, but rather, merely want to see how many files you have in that folder, or select them all and load them into a photo viewer, you won't have to wait for the file system to load the file attributes before you get a listing of the folder's contents. It seems to me like the Finder, however, might actually be forcing you to wait until it has loaded all of those attributes.
Does the foregoing sound like a plausible explanation of the problem to those out there with knowledge of how Finder actually works? And if so, does that bring to mind any potential settings that could be turned off or any other work-arounds (since those I've tried have not fixed the issue)?
If anyone has other ideas, I am all ears. I am pretty annoyed that I sunk time into switching over to a Time Capsule on the assumption that Apple couldn't have had a bug this bad, only to find out that I was wrong. The biggest irony is that my old WinXP computer used to rip through the folder structures with ease on the MyBook, but my fully updated Air is practically crippled by the same task.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I have very slow Mail when I read PDF, it almost hang. watt to do?

Similar Messages

Maybe you are looking for