I have VISA3.0,do i need any further instrument drivers to communicate with my device?

If I get Visa 3.0,will that be sufficient to communicate with my device via matlab or will I need
further instrument drivers?

Hello,
It is not very clear what you want to do. For what I understand you have an instrument that you are connecting to a gpib, or serial or tcp port in your computer. Matlab should be able to do the link between VISA and the instrument. Are you using NI-VISA? Are you using LabVIEW or any other software?
If you are using one of our GPIB cards or serial cards, then you would also need the driver for that hardware.
Hope this answers your question. If it doesn�t please provide more description like if you would like to call a Matlab script through LabVIEW or something like that.
Thank you,
Ricardo S.

Similar Messages

I have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?)

i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?) I NEED HELP BADLY PLEASE....

What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
Thanks so much!

To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
For an admin password:
Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command until
     you do. If after seven tries you still do not receive a "Filesystem OK" message,
     then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
   1. Type fsck -fy
   2. Type mount -uw /
   3. Type passwd <username>
I have never tried this method myself.

TA38622 is there any way to send sms by a connected iPhone to computer ? if so does it need any special application and program ? with witch port ? thank you.

is there any way to send sms by a connected iPhone to computer ? if so does it need any special application and program ? with witch port ? thank you.

Hi, Santosh..., and welcome to the Community,
I would recommend testing the SMS reply forwarding to your mobile number. Depending upon the results and if this works for you, you could then contact Skype Customer Service to cancel and request a refund.
In other words, SMS will be received via your mobile number, not via your Skype Number.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

HT4623 I have iPhone 4S GSM , is there any way to make it works with CDMA SIM card ?

I have iPhone 4S GSM , is there any way to make it works with CDMA SIM card ?

No.

Does any one know how to communicate with thunderbolt or J.D.Edwards Oneworld?

Hi,
Does any one know how to communicate with thunderbolt or J.D.Edwards Oneworld through LabVIEW ? Do I need to use database connectivity toolkit? Can i do it without it?
Thanks

Hi Atul,
we have made a application which uses Oneworld. We didn't use the database connectivity tool because we used ODBC and SQL.
We have some VIs to do database connectivity using ODBC functions. So you have to know SQL as language and the ODBC functions. If you do not have this knowledge the database connectivity toolkit will make it easier for you.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Hi my 3rd gen iPod nano is not connecting to iTunes - the error message says there is missing software to communicate with the device. I am running iTunes 10.4 on XP and I have tried all the troubleshooting routes to no avail - anybody help me out?

I can't get Itunes to communicate with my 3rd gen Nano - I've reinstalled iTunes several times but still get the same error message for both mine and my wife's ipod - same version of 3rd gen. All the troubleshooting guide has been followed but still not connecting.
Any ideas?

Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

Need information on how to comunicate with USB devices

I have an aquisition unit that connects to the computer trhough a USB port. Does anyone knows how to comunicate usb devices with labview using a Universal Serial Bus (USB)?

Sorry for digging up old threads, but it seemed most relevent, and I always figure it's best to add onto old then start new. For ease of the next persons search.
So anywho, My first question is... I assume it is not necessary to open and close VISA sessions to USB ports, right?
I am having an issue where my device doesn't like to work unless a specific series of events take place... very unlike USB Devices in my experience. For instance, if you have the said device plugged in, and you turn it on, then open labview. It will spit out garbage. If you close labview, do nothing else, and open labview up... it will spit out the same garbage. ( by garbage i mean a series of y's with dots over it, and odd looking p's ... you know the kind of letters you get by pressing alt+###... i think in hex it winds up spitting out something like FF EF FF FF FF EF EF ) .... now, if from this current state, I unplug the USB and plug it back into the device, it will finally start to communicate properly.
Im curious why either labview or the computer itself are not recognizing the device on the USB port properly unless it is unplugged and then plugged back in. Ive tried to do reading on USB, and got all sorts of interesting tid bits of somewhat useless information. Im trying to determine if this is something I am not doing in labview, or if this device should have a driver to register with windows, or what exactly the issue is... Just a little background, I do explicitly know all the individual commands to this device so it is not an issue to communicate with it directly through visa...
Thought some of you might have insight or some similar USB experiences....
Message Edited by MJBrehm on 10-02-2006 02:17 PM
Message Edited by MJBrehm on 10-02-2006 02:19 PM

I have a bright white screen when turning on my ipod nano 7th gen. Have tried resetting etc etc. Any further ideas?

I have a bright white screen when turning on my nano 7th gen. Have tried resetting and restoring settings - no change. Any ideas please?

Hello pipworms,
I would be concerned too if my iPod nano's was just showing a white screen. I recommend following the steps below:
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (Reset the device by pressing the Sleep and Home buttons simultaneously until the display shows the Apple logo. This should take about eight seconds).
When the Apple logo appears, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
While the device is in disk mode, sync it to iTunes and try to restore.
I got this information from the following article for the 6th generation iPod nano. The steps are the same, except I updated the reset steps with the reset for the 7th generation iPod nano:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
How to reset iPod
http://support.apple.com/kb/ht1320
Putting iPod into Disk Mode
http://support.apple.com/kb/HT1363
Thank you for using Apple Support Communities.
Best,
Sheila M.

Can i go back to the previous version, i have a plug in i need to use that does not work with ver. 4

I have norton's password manager which i use many times per session. It is not supported by MF 4.0. I really need to go back to the previous version.

https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox
https://support.mozilla.com/en-US/kb/Opening+PDF+files+within+Firefox

TS1424 Follow-Up: 270884853 Hello again, I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assist

17 day my I'd was problem....this time it is ok yes or no please help me all app pay money all app not work for example download pro good player and ....Moreno ok thanks....

Most of the people on here, including myself, are fellow users - you aren't talking to iTunes Support on these forums.
Your post's title appears to be a reply from iTunes Support. If you are still having problems with your account (e.g. for buying or downloading content) then you should reply to that email so that they can help you with it.
If none of your downloaded apps are working on your iPad then try downloading a free app from the store and see if they then work.

Need to understand how clients will communicate with a remote DP if their local DP decides to go down (offline)

Will clients fallback to the Central Office DP if their local DP "goes down", or does this depend solely on if the Central Office site DP has been configured in a Content Location Boundary Group for that remote site and if it is NOT,
then will clients will NOT be able to search for any available DPs within the domain?

It depends on the configuration of the distribution point (tab Boundary Groups | checkbox
Allow fallback source location for content) and the configuration of the application (tab Content | checkbox
Allow clients to use a fallback source location for content).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

My ipod touch won't go any further then the white screen with the apple on it

i went to erase my ipod and it erased and then restarted but when it restarted it only goes to the loading screen with the apple sign on it and even if i restart it it goes back to the same screen. pleas somby help me i ant afford a new one

iMac G5: Fails to startup
http://support.apple.com/kb/HT2173?viewlocale=en_US

Will I need any other virus protection such as McAfee for my computer if I'm using Firefox?

I'm purchasing a new home computer and would like to know if I will need any further virus protection, such as McAfee or Webroot? Is the protection from Firefox sufficient enough or should I get something else as well? Thank you.
Neil

Firefox is a browser, it is not a antivirus program, of course you must install a antivirus program of your choice.
An excellent add-on to support as a supplement your antivirus program which is provides extra protection to your Firefox is [https://addons.mozilla.org/en-us/firefox/addon/noscript/?src=hp-dl-mostpopular NoScript]. See it and your choice is yours.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

I have VISA3.0,do i need any further instrument drivers to communicate with my device?

Similar Messages

Maybe you are looking for