I have Vista 64 bit but no graphics display after downloading the latest version of iTunes
No graphics display and I can't preview any songs in iTunes Store. I have Vista 64 bit
Try this,
Close your iTunes
Go to Command Prompt. START/All programs/Accessories, right mouse click "Command Promot" and select "Run as Administrator"
In the Command Prompt, type in
Netsh winsock reset
Hit ENTER key
Restart computer.
Now open your iTunes and see if it is working now.
Similar Messages
-
After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.
I have the same problem and have been fighting with it for several days. I think the last thing that I did before this happened was to let Quicktime update itself. When I open itunes and click on store, the connecting bar gets halfway and then stops. That leaves me with the white store page, if I leave it alone for a bit, I see words as in names of singers and but no pictures.
I have ran the diagnostics and see no problems at all, no event logs in windows, no errors at all. I've un-installed itunes and re-installed but no change. I'm using Norton 360 from comcast. I have windows 7 pro 64 bit. Also, the help in itunes doesn't display.
I put in a ticket with apple and the response I got back basically told me to do what I've already done. I created a new user and have the same issue.
Any help at all will be very much appreciated. I think this started August. 8, 2011.
thanks so much for reading -
Hi my and my husbands iphones are no longer syncing to itunes but have in the past. When i try to download the latest version of itunes it won't let me do it until I load and earliers version....help
No problem.
Okay ... Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/
Does that install go through okay? If so, can you connect the phones now? -
After downloading the latest itunes,I seem to have lost the page with the grey bar on the left, so can no loonger access my device,burn disks, etc.
Can anyone please help? Thxs in advance....View>Show sidebar
-
I'm using the latest iMac & have downloaded the lates Adobe Flash player & installed it but it seems still not to work with Firefox - plse advise what to do so it can work in Firefox 3.6.13
RE Skype for Linux.
Yeah, me too, am running 64 bit LinuxMint 16, I have tried Firefox and Chrome and tried to download any/all of the Linux variants but nothing happens, I have allowed pop ups and disabled security, still nothing. I have tried downloading any/all of the linux versions onto my Asus ROG laptop running windows 8 and do a file transfer - still nothing. So I have to conclude the page is broken ?? Pretty poor really.
Stratixman. -
I have installed a new windows 7 computer (Dell) and downloaded the latest version of ITunes. How can I populate my music into ITunes from my I-pod classic?
Hey AppleMacParker,
Thanks for the question. The following article may assist you in setting up syncing with your iPod:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Select items to sync automatically
1. Connect your iPod, iPhone, or iPad to your computer and select your device.
2. Select the type of media you want to sync.
The types of media you can sync depends on your device. For more information, see Sync and organize iOS apps and Add photos to iPod, iPhone, or iPad.
3. Select the Sync checkbox, and select the items you want to sync automatically each time you connect your device.
Click a button to select the kind of content you want to sync, then select the sync checkbox and select the items you want to sync automatically
The bar at the bottom of the window shows how much space will remain on your device after you sync.
Thanks,
Matt M. -
I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
What should I do.Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792) -
I have had to restore my pc to a place back in time when it worked correctly. This meant that iTunes was deleted. I have now downloaded the latest version of iTunes but I cant sync my iPad with it. I get the message that this iPad is synced with another iTunes Library and cant sync to this one. Thankfully all my music library is on iPad. I would be grateful for some help on this issue
Its solved I just restored it to that point
-
I have downloaded the latest version of itunes to my computer and when I sync my new iphone, it says it is syncing but doe not pull the music in my library. Can anyone assist me in figuring out how to sync my iphone? The computer that has my current music library is old so I want to get it synced before it dies...
Download what applications?
Apps in iTunes do not run on computers.
What is the exact error and where specifically is it occurring? -
I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
I have always been able to create playlists on itunes, then drag them to my ipod when it is plugged into the mac. I recently downloaded the latest version of itunes, and now am unable to do that. I can drag songs and albums to the ipod, but not my playlists. It used to be so easy, am I missing something here?
Plug your iPod into your computer, it will begin to sync. Now check to see if the playlists have been added.
If not, go to the songs tab under your iPod when it is connected to iTunes, Unless you have checked "Sync all songs (or something to those words)" you should have an option on what you can put on your iPod. Make sure to check the playlists that you want on your iPod. -
I'm using windows 8 on my pc, and i have just downloaded the latest version of itunes, after i upgraded the latest version of itunes, it can't detect my iphone, but my windows/my pc does. Anyone knows how to solve this problem?
Hi jstutsman,
If you are having issues with your iPod nano not being recognized in iTunes after a recent update, you may find the steps and links listed in the following article helpful:
iPod not appearing in iTunes - Apple Support
Regards,
- Brenden -
After installing the latest version of iTunes, I can no longer export music files converted by EZ Vinyl Conversion software to iTunes, which is the only export option available in the software. I have been converting my vinyl records, tapes and cd's to MP3 files in iTunes for about a year now, and have well over 1000 man-hours invested in this effort. I tried restoring the last version of iTunes, but it will no longer read my library, as, apparently, the new version modified the library file(s) in some way. I want to reenable this export-import function to finish my archival. What is necessary ???
Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.
-
I have downloaded the latest version of itunes but when i plug in my ipod it doesnt list any devices in itunes to enable me to choose my ipod to sync it. Its like there is a link missing or something blocking my computer talking to itunes. My computer itself recongnises the ipod but itunes doesn't. Please help!
Yes reinstalled itunes a couple of days ago but got it sorted now thanks, the problem was that when i wiped my computer last week and reinstalled everything using the discs the free McAfee anti virus that the computer came with was still in my all programmes list although i aren't using it. This morning i tried unistalling that (didn't think it would make any difference as the programme wasn't active) once uninstalled i pluged the ipod in and hey presto it is now recognised by itunes, THANK GOODNESS. So panick over for now, thank you very much.
-
I keep plugging in my iPhone to my computer, but iTunes says it does not recognize my phone and won't sync because it needs the latest version of iTunes (11.1 I believe?) to work. I have already downloaded the latest version of iTunes, and I have retried multiple times just incase and it says I already have the latest version downloaded. What can I do to make iTunes recognize my phone again?
Hey there RMBrizzolara,
It sounds like you have downloaded iTunes from the download site, but when you connect the phone to your computer you are prompted to update iTunes to 11.1. I would start by opening iTunes and then verifying the version that is running with this article:
iTunes: How to find which version you are using
http://support.apple.com/kb/HT1208
On Windows
Open iTunes.
On the Help menu, click About iTunes. A window appears with scrolling text. The first text that appears displays the iTunes version (press the Space bar to freeze the text if it's moving too fast for you to read).
Also when you download the iTunes installer, you MUST double click the file that was downloaded to install it.
You can check in your Programs folder and try running the iTunes application from there to see if that works.
Cheers,
Sterling
Maybe you are looking for
-
Standard Process for Credit Memo & Debit Memos in CRM
Dear all, What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction? We can successfully replicate Return Items and Replacement Items in ECC Return Order But I don't know how to process Credit Memo and Deb
-
Basically, I can't read a PDF file that is posted on the Internet. When I click on it, I get a window that opens, but nothing else but white space. My computer also does not allow me to select Adobe Reader as one of the viable applications to read th
-
How to send the output to PDF format in reports 6i?
Hi, How to send the output to PDF format in reports 6i? I given Mode = BITMAP. DESTYPE = File, DESFORMAT = PDF, DESNAME = C:\x.pdf. Report is running fine. But PDF file not generated. I don't know what i missed. Any one can help this? Thanks Kavitha
-
What is my hard drive type and size?
My model is: 13-inch, Early 2008, Generation 5, MB402xx/A I've found the manuals for my model of macbook, I think, and it tells me how to replace the RAM. But it doesn't tell me how to replace the hard drive. I'm just not looking in the right place,
-
Quicktime error 2093 windows xp need help
can not unload quciktime or get to load new quicktime can not run on windows xp I get error code 2093. went to open the quicktime exe folder and running as me do not see how to over ride or check adminiatrator box