I have Widow7 Ultamate installed on my computer / i loaded Adobe on my computer and it shows installed but will Not work ??????????

i used your tools to uninstall and reinstalled it but adobe still will Not work

Hi stick462,
What is the version of Adobe Acrobat / Reader you are trying to install on Windows 7. Was it working before on the same machine?
Also, you may try to uninstall Adobe Reader/Acrobat using cleaner tool if the version is 9 or above: http://labs.adobe.com/downloads/acrobatcleaner.html
Try reinstall again and let me know.
Regards,
Ajlan Huda.

Similar Messages

I loose text of emails randomly; I have tried the properties and fix file procedure, but will not work;

I use W7 and TB 31.2; when I sign on to Comcast.net, all message text is fine; if I forward the Comcast emails that failed on TB they then come through fine on TB with all the text; Should I reload TB? Would I loose my emails?

https://discussions.apple.com/docs/DOC-6131

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I installed Lion and now my MS office will not work, is there a way to revert back my original software?

I installed Lion and now my MS office will not work, is there a way to revert back my original software?

Back to Snow Leopard from Lion install method
Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
Here we go!
Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
Look at the Utilities Menu for Disk Utility.
On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
Update OS X to 10.6.8 using the Combo Update for best results.
http://support.apple.com/kb/DL1399
(Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
Final step optional but highly receommended.
A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version.. (in addition to TimeMachine drive for more immediate backups.)
It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!

There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!

My 160GB ipod classic stopped whilst playing music and will not turn back on despite having almost a full battery. I have tried connecting to itunes and a docking station but will not turn on at all - HELP?!
I've had this from new for 2 years, the battery life is excellent and lasts for days so I know it's not a power issue as it was fully charged that morning. No signs of connection in itunes, it's not showing as a connected device.
Can anyone please help?

Hi gscoops,
Welcome to Apple Support Communities.
You may find the steps in our iPod Troubleshooting Assistant helpful:
http://www.apple.com/support/ipod/five_rs/classic/
Best,
Jeremy

This an IPOD I bought used. Everything else works fine. It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. Any ideas?

This an IPOD I bought used. Everything else works fine. It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. I should say it connects but then immediately disconnects. Any ideas?

Then my last suggestion is to Reset it, while connected to the BMW Audio.
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need?

I Installed Lion and now my USB modem will not work to send a PDF fax? Do I need a new USB modem to send faxes or is there a software update that I need? Also can I change the picture of the login screen? That grey mat looks ugly!

As posted by Ham on July 29 @ 9pm on this thread <https://discussions.apple.com/message/15786976#15786976>.
Official statement from Apple:
http://support.apple.com/kb/ht3152

Computer Recognizes iSight in System Profiler, but will not work

So I have a black MacBook and everything works fine except for the built-in iSight. I have tried reseting my computer and even did a factory restore, but to no avail. When I checked the system profiler, it recognizes my iSight. Here is what it says under the USB Device Tree:
Built-in iSight:
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.89
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Location ID: 0xfd400000
Current Available (mA): 500
Current Required (mA): 100
When I open iChat or PhotoBooth, the green camera comes on but it displays only black. Obviously the computer knows that I have an iSight camera, but it just will not work. Is there something I can do, or is my camera just broken? Please help me out.

jwellie wrote:
So I have a black MacBook and everything works fine except for the built-in iSight. I have tried reseting my computer and even did a factory restore, but to no avail. When I checked the system profiler, it recognizes my iSight. Here is what it says under the USB Device Tree:
Built-in iSight:
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.89
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Location ID: 0xfd400000
Current Available (mA): 500
Current Required (mA): 100
When I open iChat or PhotoBooth, the green camera comes on but it displays only black. Obviously the computer knows that I have an iSight camera, but it just will not work. Is there something I can do, or is my camera just broken? Please help me out.
So Welcome to Discussions, jwellie
(0) Have you tried all relevant suggestions from http://support.apple.com/kb/HT2090 ? Did you test iChat and Photo Booth in a new test user account? If you need help creating a test account, see this article:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
(1) You post that you "tried reseting my computer". If that means you doubt whether you properly reset your PMU (SMC) per this Apple article:
http://support.apple.com/kb/HT3964
print out the instructions appropriate to you model, study them carefully, and perform the reset again.
(2) Did you disconnect all AV devices (examples: eYeTV, iPods, scanners, etc.) before your tests? If you installed non-Apple software with any of those AV items, have you uninstalled the software IAW the supplier's instructions?
(3) When you did your "factory restore", did you zero (securely erase) your disk before installing the factory software? One zero write is sufficient to be certain there is nothing left on your startup disk that may be causing your problem. If you need help with the procedure, see:
http://docs.info.apple.com/article.html?path=DiskUtility/11.5/en/7090.html
Zeroing the disk will take a long time (hours, depending on the size of your drive), so plan some time.
(4) After zeroing the disk and a "factory restore", did you test iChat and Photo Booth before you added any non-Apple software items? This test will assure that you have not added some third-party item that is causing your problem.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Flash player shows as installed but will not work and is not recognized by anything including adobe

I hve installed flash player(several times) and it will not work. programs using it tell me to install it...but it IS..I can see it in my programs list. I have tried ev everything in adobes suggestions. none work. I cannnot acess my Exfintiy or any games on Facebook. This stipid program has screwed up everything!! All of which worked last week!! How do I fix this?

What OS?
What browser?

We set up Airprint to our Xerox machine but we have codes set up so each department has to enter their code in before they print. Airprint will not work because we have the codes. Does any one know if there is a way to override this?

Hello there-
Our Xerox rep helped us set up Airprint to our copier machine. We have department codes set up on our copier so when any one goes to copy or print something they need to punch their code in. Airprint will not work because we have those codes (something prints out to the copier saying error due to accounting codes being set up). Does anyone know if there is a way to override this on our ipads? Thank you!!

Hi Nico,
if you want a local test/development setup of Oracle why don't you just install Oracle 11gR2 XE (http://www.oracle.com/technetwork/products/express-edition/downloads/index.html) ?
If you install this you get a database, APEX (4.1), client etc all in one install, this includes a webserver (EPG) on port 8080 without having to configure anything. It's a simple next-next-next installation without much configuration.
If you would like to seperate database and software you can always do this later when you understand the concepts of database/control files etc.
If you would like to upgrade to APEX 4.2 you can download this afterwards and easily install this by running two scripts in SQL*Plus ( apexins.sql and apxldimg.sql ), just check the apex 4.2 installtion guid section EPG for this.
Regards
Bas
b.t.w. If you're running windows 7 - 64 bits just use the 32 bits XE for windows, might get some warnings but you should be able to install and run, good enough for test/dev

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

My MacBook Pro will connect to WiFi but will not work in one location but will at others. I have the same issue with my IPhone 4S at the same location.

My MacBook Pro will connect to Wifi at one location (this is a secure location) but will not allow access to the internet. I will put in the password but will not display page. Other wifi capable devises do not have this issue but my Mac and my Iphone 4S will not work. I have tried restarting the router. All other wifi locations I have been to have not had this issue. Any suggestions? I am realtively new to Apple products (less than a year) so any advise is greatly appreciated.

The other devices that are working got on with the same password. It says it is connected. Just nothing works on the internet.

Have just downloaded iTunes 10.5.2.(11) onto Mac Book Pro and now the earphones port does not work. Any suggestions? Annie H

Have just down loaded iTUnes 10.5.2.(11) onto MacBook Pro and now the earphone port is not working. Any suggestions. Annie H

My System Preferences>Soundoutput screen does not have the "Use audio port for" field.
Does your MBP have two separate audio ports - one for line-in and one output port? Then you wan't see that selector.
but the port has started to work again....Reason???
Perhaps there was dirt or something in the jack and the contact was bad.
(or you accidentally put the plug into the line-in jack instead into the audio-out; that happened to me once ).
Regards
Léonie

My iphone is not showing in itunes/devices i have un-installed and re-insalled itunes but still not working i have not had this problem before this has just happed i am running win8

my iphone is not showing as a device in itunes so cannot sync i have un-installed and re-installed itunes but still not showing yhis problem has just suddenly happend so dont understand whats wrong i am currently running win 8

Try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
tt2

I have Widow7 Ultamate installed on my computer / i loaded Adobe on my computer and it shows installed but will Not work ??????????

Similar Messages

Maybe you are looking for