I have wifi connection but can't face time or use safari?

i have wifi signal on ipad but cannot use it?

Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • Have WIFI connection but can't access Safari or App store, nothing.  Can anyone help??

    I have just bought a iPad 2 WI-FI 16G today.  I have a full WI-FI connection but can't access the App store or Safari for any webpages, can anyone help?
    Thanks!!!!

    Despite what you call, "a full WiFi connection", you may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid local network IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power to the router for 30 seconds and then  restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • I'm from the USA but am on vacation in Brazil; I have a great WiFi connection but can not connect to the iTunes Store. Is this because I am out of the Country?

    I'm from the USA but am on vacation in Brazil; I have a great WiFi connection but can not connect to the iTunes Store. Is this because I am out of the Country?

    Thank you very much for your insight; I guess I had assummed that iPads/iPhones/iPods were here in Brazil and further assumed that the iTunes store would also be available.

  • I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

    This is possible to be connected to WiFi but not internet.
    You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
    Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
    Then make sure that your modem/router is connected to the internet.
    You can try any other device, lights on the modem/router or use Eth cable to test.
    Report back your findings.

  • "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why?

    "Unable to connect to server"  I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(

    Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.

  • I have wifi connection, but my internet is very slow

    I have wifi connection, but my internet is very slow

    try switching off photo stream in System Preferences > iCloud
    This seems to throttle the internet connection and when I switched it off, it fixed my issues instantly!

  • HT204053 Have just got iPhone 4S but can not face time to iPad please help

    HAve just got iPhone 4S but can not face time to my iPad please help

    Do you see your Outlook calendar on the iCloud website?
    Do you see your iCloud calendar on your iPhone?
    This Apple article is a good place to start -> iCloud: Troubleshooting iCloud Calendar

  • Have wifi connection but won't let me connect to itunes or do anything else

    Have a wi fi connection but can not do anything and when I try app store it says cannot connect to itunes store

    Can't connect to the iTunes Store

  • Airport Extreme-have wifi connection but no internet on some devices???

    I just replaced my linksys router with the latest (tower) Airport Extreme and an Airport Express as an extention of the network.  Now I had a heak of a tme setting this up to mimic what the linksys did so I would have a smooth transition.  I have a windows server 2008 R2 server which is my file server, DHCP & DNS server.  I set my Extreme with the "DHCP & NAT" set the range I use which is 10.0.0.10 - .253, Set the router's address to 10.0.0.10 in network properties as well as setting the default host to point back to my server at 10.0.0.100.  I also checked "Enable NAT port mapping protocol".  Everthing seems to be working great most of the time...my wired PC's have internet and their proper IP addresses, my iMac and MacBook Pro have internet and proper IP addresses, iPad, iPhones...BUT I am noticing on my iPhone 5 that I'll show a full wifi signal but no IP address there for no internet.  Now this happened a couple times and the only way I got it back was to do a rest of the phone.  I have never had any wifi issues with this prior to installing the Extreme and Express.  So I thought it was just the iPhone but my iPad just behaved the same way and a rest took care of it.  Worse at the same time I checked my MacBook and I have the exlimation point over the wifi in the top tool bar.  I can see and pick my SSID but couldn't get an IP address until I clicked the Airport Utility then it connected.
    So basically I am looking for any suggestions or better yet fixes on my issues.  I'm not sure if I have the Airport Extreme configured properly for it to work with the Windows 2008 Server.
    I appreciate any help at all!
    Thank you greatly in advance,
    Dave

    And when is apple going to put a NAT only mode on the Extreme????
    Apple have a policy of not telling.. you can ask .. but they don't tell.
    I am a rather recent arrival on the Mac/Apple seen so I would also wonder how an OSX server is setup with AE..
    For wireless in particular, you can use Enterprise level security.. and that might fix it... because instead of using a preset key, as standard in wireless you can use a username and password combo from a radius server.. which might then be used to pass IP via dhcp. Something to consider if you don't mind getting a bit more complex..
    Look at this thread which is looking at using ox x server which is basically the same issue you are having.
    https://discussions.apple.com/thread/2756247?start=0&tstart=0
    The idea of using a static range of IP addresses.. that might work.. with DHCP actually turned off.. I have used this setup for something completely different.. ie to pass different DNS to clients that need access to Netflix from overseas.. I did not explore it from a your no dhcp setup.. but that is another option to try.. there is so little info supplied it is hard to know and you just have to trial and error with it.
    Here is another interesting post
    http://www.youtube.com/watch?v=qyU4vpMljEI
    Clearly other people are hitting the issue.

  • Have wifi connection but no internet?

    I have an Airport Extreme (version 7.6.4) in bridge mode as main network, this is connected via ethernet to an ADSL router (this allocates the ip addresses)
    I then have 3 airport express extending teh network to improve the signal in different parts of the house. All the ip addresses are 10.0.0.x.
    I have internet connectivity on my iMac (10.8.5)  connected to the wifi network, however my Macbook Pro (also 10.8.5) and all my iOS devices (iphone 4s on iOS 6.1.2 and ipad 2 iOS 7.0.3) whilst having strong wifi connection do not have an internet connection. When I launch AirPort utility on the macbook pro and iOS devices it shows the network but the internet reflects as disconected, whereas on the iMac the internet is connected.
    Any ideas what is causing this?

    I have an Airport Extreme (version 7.6.4) in bridge mode as main network, this is connected via ethernet to an ADSL router (this allocates the ip addresses)
    Since you have a router "upstream" from the AirPort Extreme, the Bridge Mode setting on the AirPort Extreme is the correct setting.
    As you know, when the AirPort Extreme is set to "create a wireless network", the AirPort can be setup either in Router Mode or Bridge Mode.
    This avoids a situation where you have two routers on the same network, with both of them are trying to provide DHCP and NAT services.  Conflicts would be certain with two routers competing against each other.
    I then have 3 airport express extending teh network to improve the signal in different parts of the house. All the ip addresses are 10.0.0.x.
    Can you clarify whether the Expresses are "extending" the network wirelessly?  If they are, then they are already in the correct Bridge Mode setting.
    Or, are the Expresses "extending" by connecting back to the AriPort Extreme using wired Ethernet connections?
    We need to do some more troubleshooting starting with one Express at a time.....but first need to understand how you have the Expresses connecting to the AirPort Extreme.
    We assume that each Express is either the A1264 version or the current A1392 version. Is that correct?

  • I have WiFi connection but no internet access HELP

    I got the ipod touch 3rd generation two days ago at yesterday it was connecting fine but now when i try to connect it shows that i have good WiFi signal but no actual internet connection because when i try to load app world or Safari it wont let me. I have reset my router several times and reset my network settings on my ipod but still nothing. My computer and laptop are both working fine with the internet. However, my sister also has the same ipod and she has the same problem but she resets it once and it works but her ipod has not been updated in a long time and mine has the latest software. HELP ME PLEASE!!!

    You may not really be connected to your WiFi network.
    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (not reset -  to restart remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages. Check for a firmware update for your router on the manufacturer's support web pages. See the documentation that came with your router on how to install.
    If you need more help please give more details on your network, i.e., your router make, model and version, and how you have it configured.

  • Imac wi-fi, it says I have a connection but can't get any internet access

    Hi All,
    Help please, just got a new iPad air and trying to use the Wi-Fi function on the iMac to access internet on the iPad. Used to be able to do this on previous tablet but now iMac won't wi-fi any of my devices- including new iPad. All devices and iMac say there is a connection but when I open internet apps it tells me there is no connection. Have reset iPad, turned wi-fi on/off, turned internet sharing on/off everything! Think the problem is the iMac, can anyone suggest a solution?
    Cheers

    I have checked the network in the system preference. The Built-In-Ethernet has a green light beside it and says "Built-In-Ethernet is currently active and has the IP address (bunch of numbers). You are connected to the Internet via Built-In-Ethernet."
    When I click on "Assist me" and then "Diagnostics", The Network Diagnostics screen pops up and Scans for a while. There's five tabs on the left. Built-In-Ethernet is green, Network Settings is Green, and ISP is green. After scanning for a while, the tab by Internet goes red and says Failed below it, and the tab by Server goes red and says Failed below it. Then it asks me "Have you ever used this computer to successfully connect to the internet?" I say yes, and then it asks for the network port configuration that I would like to use. I choose Built-In-Ethernet, and it scans for a while and tells me "This computer appears to have a working internet connection, but cannot find www.apple.com. You may have typed the address incorrectly.
    My neighbor has a wireless network that is unsecured. I use it all the time on my ipod touch. My imac finds it, connects to it, but I still have the same problem. No browser or mail will work.
    Message was edited by: thescamdog

  • I have a connection, but can't get any internet or email

    I have two macs. The new one suddenly won't open any internet pages or email. I can't use Safari or Firefox or my mail. The old G4 cube on the same cable modem is having no problems at all. I called my ISP, and everything is fine from their end, and they can see my IP address and it matches what they have, so all should be working. On the imac, it says I have an internet connection, gives me an IP address, and claims I'm connected. But when I open Safari or Firefox or my mail, I get nothing.
    Any suggestions?

    I have checked the network in the system preference. The Built-In-Ethernet has a green light beside it and says "Built-In-Ethernet is currently active and has the IP address (bunch of numbers). You are connected to the Internet via Built-In-Ethernet."
    When I click on "Assist me" and then "Diagnostics", The Network Diagnostics screen pops up and Scans for a while. There's five tabs on the left. Built-In-Ethernet is green, Network Settings is Green, and ISP is green. After scanning for a while, the tab by Internet goes red and says Failed below it, and the tab by Server goes red and says Failed below it. Then it asks me "Have you ever used this computer to successfully connect to the internet?" I say yes, and then it asks for the network port configuration that I would like to use. I choose Built-In-Ethernet, and it scans for a while and tells me "This computer appears to have a working internet connection, but cannot find www.apple.com. You may have typed the address incorrectly.
    My neighbor has a wireless network that is unsecured. I use it all the time on my ipod touch. My imac finds it, connects to it, but I still have the same problem. No browser or mail will work.
    Message was edited by: thescamdog

  • Touch says I have Wifi connection, but Safari says no internet connection

    My wifi had been working fine on my iPod Touch, but it all of a sudden stopped connecting to the internet 2 nights ago. I still have wifi internet connection on my laptop though...so it much be an ipod issue. I reset my modem/router and my network connection on my ipod...why isn't my ipod connecting to the wifi internet anymore? :[
    Message was edited by: musicequalslife15

    Did you reset your network connections using Settings > General > Reset > Reset Network Connections?
    Did you try to log back into your network using Settings > WiFi > Other Networks and re-entering your network name, security settings, and password?
    Have you tried a general reset of your iPod?

  • Have Wifi connection but won't load

    My Iphone 3g  indicates wifi connection after finding and connecting to my office router but won't load Itunes, App store or Safari pages, it will however connect via 3G. The phone is using Orange as the carrier and the phone was previously on the o2 network but was unlocked by o2 prior to putting in an Orange sim.
    I have an identical Iphone (for business use) which connects fine, this is running on an O2 network but is otherwise identical.
    Any suggestions are really appreciated.
    Many thanks.

    If you are running Lion 10.7.2 please try Lion WiFi  problems fix, if you have trouble understanding it then watch the WiFi Lion Fix on YouTube . Your issue also could be with your router, it may be using a older firmware version. You will need to refer to the router mfg for instruction on how to update the router.

Maybe you are looking for

  • Convert contents of a formatted excel cell to HTML format

    Hi All, Background: I am writing a script that uploads some test cases written in excel into Quality Center. For those who are familiar with the QC Excel Addin, this script would do a pretty similar job except for reducing the steps involved. I'm usi

  • [SOLVED]wma support for banshee

    Hey guys, I just installed banshee with all the extra gstreamers and it works like a charm, the only problem  though is that it won't play wma files. Is there a certain plugin that must be installed for it to work? When I used other distros banshee w

  • Wrong router for my needs

    I think I let a pretty advertisement convince me to buy a product that is not suited for my needs; I hope someone here can shed some light on this for me as I am new to wireless home networking. I have an Ubuntu (8.04) box hard-wired to my cable mode

  • How do i update to the newest hp assistant?

    1) hp pasario, 64 bit,intel celeron 2) windows 7 home premium 5) i usually do a routine maintenance, and once i did it today, the computer suggested that I get an UPDATE hp assistance, the more recent one!  I don't know how to do this.

  • Please tell me about flash back query

    Hi Please tell me about flash back query and when to use it and the advantages.. Thanks in advance..