I have Windows 2000, DSL access, and just updated to Firefox 7 which seems to run much slower in many ways: any thoughts?

Firefox starts as quickly as before, but switching between tabs or closing tabs often takes forever. Also when I drag to highlight a long page and copy, the scrolling speed is much much slower than before. To highlight a long passage I have to drag just the beginning, hold that with the Shift key and use the arrow keys to highlight the whole passage within any reasonable time. Closing Firefox is usually as quick as before, but once in a while it gets constipated and takes 30+ seconds to close -- though I suspect this might have something to do with some open tabs. (By "close" I'm referring to when it leaves the screen, not later when it is dropped from memory.) I average 3 or 4 open tabs with brief periods of 8 or 9 open tabs.

Please try this: '''Tools''' (or '''Alt''' + '''T''') > '''Options''' > '''Advanced''' > '''General'''. Under '''Browsing''' deselect '''Use autoscrolling''', '''Use smooth scrolling''', '''Use hardware acceleration...''' if any are selected.
You may also want to boomark these for occassional reference:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
[https://addons.mozilla.org/en-US/firefox/performance/ Slow Performing Extensions/Add-ons]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

Similar Messages

  • I just downloaded a lot of PDF textbooks to my ibooks, and now it crashes within seconds of opening the app. I have tried restoring the iPad and just updated the iBooks to 3.1. Any ideas? I have the new iPad.

    I just downloaded a lot of PDF textbooks to my ibooks, and now it crashes within seconds of opening the app. I have tried restoring the iPad and just updated the iBooks to 3.1. Any ideas? I have the new iPad.

    What a waste of space to paste the code.
    Why not ask in the iLife > iPhoto forum where your question belongs.

  • I have a new macbook pro and just installed latest firefox. The problems is i can't seem to disable the tabs from appearing each time i restart firefox. I did uncheck every box in the peferences tab menu, still can't stop the tabs from appearing.

    New Macbook pro with lion
    Firefox 10.0

    Hi dcast01,
    Are you saying that it restores your old tabs when you restart? Have you looked at ''Preferences > General'' to see if Firefox is set to restore your tabs from the last session? You should change it to ''When Firefox Starts: Show my home page''.
    Or is your issue that you keep seeing the tab that says "welcome to firefox" when you start the browser? If that's the case, you should look at [https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox this article about that specific issue] and the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved]. These should give you all the information you need!
    If that doesn't work:
    # Type about:config in the address bar
    # Click ''I'll be careful, I promise'' if prompted
    # In the Filter input field type ''startup''
    # Double click on startup.homepage_override_url
    # Delete the text string and click ''OK''
    # Close Firefox and reopen the window to verify that it has worked.
    Hopefully this helps!

  • Firefox will not let use any checkboxes on any sites, like when you read the rules and want to check the acceot checkbox. We just started using firefox alot because IE is running incredibly slow on our computer. Any ideas

    Our computer has been running terribly slow, so we switched to using Firefox and it will not let me use any checkboxes on any website. Is there a setting or anything that needs to be changed

    Many of your points are totally legitimate.
    This one, however, is not:
    …To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
    The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
    The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

  • I had firefox 3.6 and since I updated to 4.0 my computer is running much slower. I called my ISP and they cannot uninstall the 4.0 version. I play alot of POGO and it runs sooo slowly. I am using windows XP. Can you help me get the 3.6. version back?

    I would like to get the 3.6 version and uninstall the 4.0 version computer running slow

    Here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 4.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • I just restored my 24 inch imac and it seems to be running MUCH slower than before. Any Ideas why? thanks in advance for your help!

    I have erased and restored my 24 inch Intel iMac. I have upgraded to the last version of X os. My system is running WAY slower than it was before. Even opening windows seems to lag and the spinning wheel come up for everything. Every task is slow, even typing this! lol
    Here are my specs:
    Model Name:          iMac
      Model Identifier:          iMac8,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.8 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          IM81.00C1.B00
      SMC Version (system):          1.30f1
    Any ideas would be helpful. Is this a hardware issue?
    Thanks!

    Matt:
    Thanks for the update. It is good to know that the maintenance procedures helped. Regular maintenance and a good backup are key to computer security. Gulliver's article has a suggested schedule. Dr. Smoke's FAQ on Backup and Recovery has excellent information and advice. I part company with him on his insistence on Retrospect, which I have found to be difficult to use. SuperDuper has been shown the best backup software in these tests.
    If you usually leave your computer on or asleep, it is good practice to shut down and start up in Safe Mode occausionally. I do it about once weekly.
    Good luck.
    cornelius
    Message was edited by: cornelius

  • I just upgraded to FF 4.0, and am overall unhappy with the app. It runs much slower than my previous version, and continually hangs...even on the Mozilla websites. I'm going to try and go back to my older version, which I loved.

    As noted in my question, FF4.0 continually hangs (Not responding) even on your website.

    http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
    http://www.mozilla.com/en-US/firefox/all-older.html

  • Can I still get CS5 trial - I have limited internet access and just want software on my pc - I am only running vista so that looks to be the latest that  will work for me

    Can I still get CS5 trial - I have limited internet access and just want software on my pc - I am only running vista so that looks to be the latest that  will work for me
    If so what url do I go to as I have been round in circles and always come back to CC
    Thanks

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

  • I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

    I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM.  My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore.  Connected those drives to TM via firewire and could see the drives and access them.
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.  I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads.  Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system.  I really didn't want to monkey around too much with my system.  But are there other options to connect the new TC.  Can't find info anywhere for this and called apple who gave me the info above.  after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light  or repair it in disk utility if it should become corrupted.
    For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working.  Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
    Now a rant.  I can't believe in this wireless age that Apple would make a product that cant join a wireless net work.  The apple rep said i could return it and look for the previous TC that would join an existing wireless network.  Are we going backwards?
    Thanks!
    lennydas

    Ok... it is getting a bit clearer but there are still some questions.
    I connect to the internet via airport only and it is pretty fast.
    I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.
    I think this is mistaken.
    Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
    If the computer is close it will be faster than the FIOS.
    You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
    I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC.  the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
    Thanks again!
    You cannot extend to a non-apple wireless router.
    You cannot use join a wireless network because when you do the ethernet ports will be cut off.
    But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
    Join in the express is the only apple router that still allows an ethernet connection.
    For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

  • Zen 3.2 snap shot to force out windows 2000 service packs and critical patches

    Zen 3.2 snap shot to force out windows 2000 service packs and critical
    patches
    has anyone used MSI to do the installations of services packs.

    All Hotfixes and SPs have switches on the EXEs to allow for silent
    installs.
    This is the recommended method of deploying these.
    [email protected] wrote:
    > Zen 3.2 snap shot to force out windows 2000 service packs and critical
    > patches
    > has anyone used MSI to do the installations of services packs.

  • ITunes says "Must have Windows 2000 or Later...please make sure compatibili

    "Must have Windows 2000 or later. Please make sure compatibility mode is disabled in the Compatibility tab of the properties for iTunes.exe"
    I do and it is. What the heck is going on? Anyone else get this? I have downloaded it 3 times now and get the same thing every time.
    I have also done a Windows Update and it still remains the same...

    You need to turn off compatabilty mode, see this apple article:
    http://docs.info.apple.com/article.html?artnum=302478
    OOps sorry, I should have read your post more carefully.

  • I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can I get idvd?

    I have a new macbook pro and just made a video on imovie and it asked me to put it on idvd but there is no idvd listed as an option. How can i get idvd. it doesn't seem available

    Since Apple has stopped supporting and offering iDVD you'll need to purchase the iLIfe 11 disk from a 3rd party retailer like Amazon.com: iLife 11 which will include iDVD 7. 
    OT

  • We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

    We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

    Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

  • I have a 3gs and just updated my ios from 4.1 to 6.1.  But I can't activate it after the upgrade. heeeeelp!

    I have a 3gs and just updated my ios from 4.1 to 6.1. But I can't activate it after the upgrade. what to do?

    joycesalvador wrote:
    ... But I can't activate it after the upgrade. what to do?
    See this discussion.
    https://discussions.apple.com/message/21189708

  • I have an old IPOD Touch and just bought a new Nano.  If I download the latest version of Itunes for my Nano, will I lose all of my songs stored in my old version of Itunes and can I still use my Touch with the new version?

    I have an old IPID touch and just bought a anew Nano.  If I downoload the latest version of Itunes for my Nano, will I lose all of my osns stored in my old version of Itunes and can I still use my Touch (with my current songs on it) with the new version of Itunes?  In the past when I downloaded a new version, I lost my songs on my Touch.  Thank you for any help any one might offer.

    i am no shure but go on Itunes store in shortcuts and try to find 'purchasse'
    good luck

Maybe you are looking for

  • Dynamic column handling in reports of BPC 10.0 NW EPM Add in

    Hello All, My requirement is to have 3 columns. Col1 is defined based on Context selection from TIME dimension . Col2 is defined based on EPMoffset function based on Col1. Col3  to be shown always previous year with Dec month (2014.12). Say for Examp

  • Can't export PDF to word.

    I've subscribed yesterday and still can't export PDF to word.

  • WinRM query result locale

    I am testing the following scenario: WinRM client is running on a Windows Server 2008 with German locale Hyper-V (and WinRM service respectively) is running on Windows Server 2012 R2 with English as default locale and German locale installed in addit

  • OIM - IT Resource - how to cofigure Mail Server

    Hi, Maybe it is dummy question... but I want to configure a mail server as an IT resource in OIM and there are 4 fields to fill; authentication, server name, user login, user password, what authentication field refers to? It is not obligatory field b

  • Animating video in photoshop

    i am animating film footage in photoshop Cs6.  i have used the paint brush tool to draw an image over my film, which works nicely.  but i have to do this frame by frame--e.g. as i move to the next frame, what i draw is gone, and i have to reanimate e