I have windows 64 and trying to download itunes 10.5, it start downloading but then after it`s almos finish i have a window pup up with error Microsoft ft VC80.CRT,type="win32" etc.Please help.I have windows 7 64
I have windows 64 and trying to download itunes 10.5, it start downloading but then after it`s almos finish i have a window pup up with error Microsoft ft VC80.CRT,type="win32" etc.Please help.I have windows 7 64
same here.
Similar Messages
-
Installing error: "Microsoft. VC80.CRT. type="win32" "
A few days ago I tried to open iTunes only to be told there was Mediatoolbox.dll missing, this confused me because I don't mess around with the technicalities of programmes on my laptop ,so, from previous experience with iTunes I figured simply un-installing and re-installing would solve the issue like it does normally. However, when I now try to re-install it it comes up with this error message:
After clicking OK this error message appears:
If I press retry it's just a continuous cycle of this message appearing, if I click abort it cancels the entire install but if I click ignore it does finish installing and even says it has done so successfully. Although when I try to open iTunes it comes up with this error 2 message:
It was suggested in a discussion on here that I completely wipe off iTunes and it's applications using these instructions - Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support , which I have tried and failed to get anywhere with.
Going a little bit mad here, have tried numerous other things aswell, such as extracting files, but had no luck. Would greatly appreciate any help.Try:
Troubleshooting issues with iTunes for Windows updates
Next. post in the iTunes for Windows forum
iTunes for Windows -
An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
im trying to install and i get a message saying
"an error occured during the installation of assembly 'Microsoft. VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b3b9a1e18e3b ",processorArchitecture="x86"" . Please refer to Help and Support for more infomation. HRESULT: 0x800736B3These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
when i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86" what should i do?
same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
i was trying to download the new itunes, ahd this message appeared. What can i do?
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.
it says that Windows Resource Protection could not start the repair service.
Okay. We've got a broken Windows Modules Installer on the PC, then.
It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
I am getting this error message when trying to download itunes on windows 7 32 bit: microsoft.vc80.crt.type="win32".version="8.0.907276195".publickeytoken="1p86369 ale18e36" Hresult: 0x800736fd
Can someone please Help?I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195".publicKeyToken="x86"'. why??
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Tried to install itunes 10/5 and got this error:
An error occured during the installation of assembly 'Micrsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712
Can anyone help solve this problemExactly the same problems as many others with iTunes 10.5 and my Windows 7 32 bit laptop: An error occurred during the installation of assembly 'Microsoft.VC80.CRT .type="win32", … HRESULT:0x800736FD. I followed the Apple instructions to completely uninstall earlier iTunes and all Apple applications and then tried to re-install iTunes 10.5. Numerous attempts. Still no success. Constantly goes through the install and then rolls back after failure.
By unzipping using WinRAR and installing each module separately it seems that the module that fails is the AppleApplicationSupport.msi
Finally I uninstalled everything again and reinstalled iTunes 10.4.1. This installed perfectly. So at least I still have iTunes.
I was able to install iTunes 10.5 on myWindows XP SP3 desktop.
I noticed with WinRAR that the AppleApplicationSupport.msi file with 10.5 is a completely different size to that with 10.4.1. This suggests to me a conflict between the latest AppleApplicationSupport.msi and Windows 7. -
Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE. Recently upgraded to windows 8.1 then everything just wouldn't work properly
Could you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?
-
Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
i am trying to reinstall itunes 10.5 and am getting the following error message.
An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
Anyone know how to fix this?same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
Can't download latest Itunes 10.5 - Keep receiving following error: An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win32",version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".pro cessorArchitecture="x86".
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR
Maybe you are looking for
-
I film with an iPhone and edit in PE10, what project settings would be best?
So I'm filming a short film with my iPhone 4S, and editing in PE10. The recommended project setting for the iPhone 4S's footage is 'Flip Mino HD and Ultra HD 29_97'. However, I film using an App called FilmicPro, which allows me to customize fra
-
I want to exclude Mail messages from showing up in Finder search on OSX Mavericks.
I went to the SysPrefs > Spotlight > Search Results tab and uncheck Mail but all my email messages still show up in finder searches. How do I exclude finder from searching mail?
-
FIM Synchronization Service - How to provsion a group to another object type
Hi, i'm new to fim and use just the fim2010 synchronization engine with some rules extensions. I have 2 ActiveDirectories and want to Provision a Group(used as Distribution list) from ActiveDirectory A as a contact object in ActiveDirectory B with th
-
Help!!!why the flag " jsp:forward" don't work?
the code like this: <%@page buffer="none" autoFlush="true" %> //attention: buffer="none" <% long i=0; for(i=0;i<10;i++) out.println("@@@@@@@@@@@@@@@@@"); %> <jsp:forward page="test.jsp" /> but it not turn to the page "test.jsp".Why?
-
Acrobat won't start after Reader for Palm OS
That's basically the problem. I can't open any PDF files since I got Adobe Reader for my new Treo running the Palm OS. It's ver 3.05, Build20030829. Should I uninstall Reader, or is there something I'm missing?