I have windows 7 and i recently downloaded firefox 4 last month and today it just wont display as firefox 4

i have windows 7 and ive had firefox 4 for a while and it has been working properly until today . it won't display as the firefox 4 but as a regular firefox. my persona will not work with firefox4 anymore like it did until this day. i tried uninstalling and restarting and reinstalling but nothing is working how can i fix this to have the firefox 4 browser and personas back to the way it was when i downloaded firefox 4 last month

Presumably it looks like you see it in the top half of the screenshot?
If so, right click a blank part of the Tab Bar and then click the top option called "Menu bar". This will return it to the way you see it displayed in the bottom half of the picture albeit with the tabs on top.
If you want to move the tabs to below the location bar, right click a blank part of the Tab Bar again and then click "Tabs on top".

Similar Messages

  • Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • I recently downloaded Supernatural season seven, and cannot download it onto my iPod, qnd cannot find any other way to watch it. We have iTunes, but on a Dell, not a Mac or PC. Any suggestions?

    I recently downloaded Supernatural season seven, and cannot download it onto my 4th generation iPod touch, and cannot find any other way to watch it. I have iTunes on Window XP, but not a Mac or PC. The show will come up, but not completely load. Any suggestions?

    1. No.
    2. Click here and follow the instructions.
    (100305)

  • I attempted to update my firefox last night, and when i did it casued me to have to reinstall adobe flahplayer and adblock. When i attempted to re-download these apps i couldn't. Now I don't have adblock and I can't watch videos because flashplayer won't

    i attempted to update my firefox last night, and when i did it casued me to have to reinstall adobe flahplayer and adblock. When i attempted to re-download these apps i couldn't. Now I don't have adblock and I can't watch videos because flashplayer won't download. If this can't be corrected I may have to return to Internet Explorer. Can this be put right? in English
    == This happened ==
    Every time Firefox opened
    == 7/20/2010

    Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.<br />
    See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]
    You can check the Adobe welcome and test page: http://www.adobe.com/software/flash/about/
    You can use this manual download link:
    *http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

  • I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick.  My iTunes will not open because it says i need a 64 bit version.  Already followed the promted instructions but no luck.  Any suggestions??

    I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick.  My iTunes will not open because it says i need a 64 bit version.  Already followed the promted instructions but no luck.  Any suggestions??

    Oh, you do have the C2D! That's great!
    I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.  
    Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
    It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
    Well, that's about it..
    I hope that something I've mentioned can help you achieve your overall goal.
    Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
    Best Regards,
    mm~

  • I have recently downloaded final cut pro and i'm unable to access cinema tools. I understood this would be a free addition when purchasing FCPX?

    i have recently downloaded final cut pro and i'm unable to access cinema tools. I understood this would be a free addition when purchasing FCPX?

    Thanks for responding Tom. Yes I was trying to conform frame rates, I found a few threads/youtube tutorials that all used cinema tools. Now I've spent some time in FCPX I can see where you can conform.
    Appreciate your help.

  • I have an Iphone 4S, and I recently downloaded the IOS7, my Iphone now isn't an Iphone anymore it became an ugly Samsung!!!!! and is much slower!!!! What can I do to get my old better Iphone back???

    I have an Iphone 4S, and I recently downloaded the IOS7, my Iphone now isn't an Iphone anymore it became an ugly Samsung!!!!! and is much slower!!!! What can I do to get my old better Iphone back???

    Unfortunately you can't go back to ios6. Please write to apple - http://www.apple.com/feedback/
    I also think ios7 makes the iphone look like a samsung. Pure Ugly.

  • I have recently downloaded OS X lion and I want to upgrade iPhoto to use with iCloud. I can't find the software update anywhere where can I get this?

    I have recently downloaded IOS X Lion and I want to upgrade Iphoto to use with ICloud, I can't see the upgraded anywhere on the computer in system updates or on APP store updates. Where can I find this?

    If you have lion and iPhoto '11 (latest version is 9.2.1) you can set up and turn on iCloud there and if you have IOS 5 on your mobile then your mobile devices will sync with your Mac
    If this does not cover what you need please describe your situation in more detail
    LN

  • So, I got Adobe CC a year ago and I recently downloaded ABOBE CC 2014 at adobes SUGGESTION. When I open After effects it says I only have 4 (and counting ) days left to purchase----I'm supposed to get it for FREE, right?.  It doesn't happen when I open il

    So, I got Adobe CC a year ago and I recently downloaded ABOBE CC 2014 at adobes SUGGESTION. When I open After effects it says I only have 4 (and counting ) days left to purchase…………I’m supposed to get it for FREE, right?.  It doesn’t happen when I open illustrator and Photoshop CC 2014. Am I doing something wrong? If you’re not the one to contact please refer to the correct person……….the school uses AE CC 2014  so I NEED to have the correct version.

    you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • I recently downloaded itunes 10.5 and have lost all my music. How do I retrieve it? Help!

    I recently downloaded itunes 10.5 and have lost all my music.  How do i retrieve it? Help!

    shouldnt be too hard for them to not have sync as the default
    Not difficult at all but iTunes is meant to be very simple to use. No one would know how to sync their music if the default was to not sync it.
    many people will have an ipod that hoops up to itunes for first time and then will sync up and lose all songs
    One big reason to make regular backups.

  • Hi.  Ever since I downloaded the last itunes and quicktime update (a week or so ago), I can't access any video podcasts or movies I have stored in itunes.  iTunes keeps crashing and telling me I have a quicktime error.  Do I uninstall quicktime? or?

    Hi .  Ever since I downloaded the last itunes and quicktime update ( a week or so ago), I can't access any movies or video podcasts i have store in itunes on my pc (vista).  iTunes crashes and my error reports tell me it is a quicktime error.  Do i uninstall and reinstall quicktime, or completely uninstall itunes and reinstall it -- if so, what will i lose?  Help, please!

    Let's try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • TS1702 I recently downloaded The Sims Freeplay and whenever i try to open it, it just crashes.

    I recently downloaded The Sims Freeplay and whenever i try to open it, it comes up with the EA Games logo then it seems to freeze for about 15-20 seconds, then it crashes. im not sure if this problem is with my ipod or with the app, anyone got any ideas? I looked on the reviews for it on the App Store, but nobody else seems to have had the same problem as me.....

    Try here:
    iOS: Troubleshooting applications purchased from the App Store

  • HT1689 I recently downloaded the app, "Priorities", and love it on my iPhone, but can't get it to work on my MacBook Pro.  Can you help?

    Dear Apple Support Communities,
    I recently downloaded the app, "Priorities", and love it on my iPhone.  However, it won't load onto my MacBook Pro and I would love to have it sync from my iPhone to my MacBook Pro.  Is this possible?  If so, how can I do this?
    Thanks,
    easyjack

    They don't make an OS X version of their software.

  • I have bought a luminex camera but cannot download my pics onto my mac as I don't have windows. Can I download windows on my mac.

    I have bought a luminex camera but cannot download my pics onto my mac as I don't have windows. Can I download windows on my mac.

    (1) You should not need to use Windows on your Mac unless you want to do so.
    I'm unsure what a "luminex camera" is, but you can probably use your Mac's iPhoto app with it.
    Launching iPhoto and search iPhoto > Help for "import" (without the quote marks.)
    If you're still having trouble, this article may give you some ideas:
    iPhoto '11: Import photos or video from a digital camera
    (2) You can only "download Windows"  if you have bought it from a download source.
    Once you have an usable (downloaded or disk-based) Windows installation, Apple's
    Windows on a Mac Support page explains using Windows on your Mac via Boot Camp.
    VMWare, Virtual Box, or Parallels Windows are other alternatives.  This article may be of interest:
    The best way to run Windows on your Mac.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • My Company was mistakenly sent CS6 for Windows.  May I download CS6 for Mac and use serial # for win

    my Company was mistakenly sent CS6 for Windows.  May I download CS6 for Mac and use serial # for windows?

    Unless things have changed, there are separate S/N's for the PC and the Mac versions.
    I would immediately contact Adobe Customer Support (not Technical Support), and explain the error. I feel that they will be able to help you with replacing the PC version.
    Good luck,
    Hunt

Maybe you are looking for

  • I restored my macbook air

    i restored  my macbook air to factory settings to delete all my stuff cause ill gonna give it to my sis,,, & it didn't dowload iphoto,imovie & garageband,, i tried to dowload from app store & it says that those apps were assigned to another apple id,

  • Skype for Business / MS Office

    I have the new Skype for Business client unstalled in my home office PC as part of the MS Office 2013 suite. Can this client be used to log into my personal Skype account? If so, how do you enter the proper credentials?

  • [Solved] OSS can't be started at system start.

    Hello. I got strange issue with OSS. I got OSS in deamons array and I can't start it. I getting error's: When you got something wrong in your config file and I got connection refused at mpd port When I restart 2nd times OSS is starting normally. Than

  • Pb with image in pdf on ssl

    Hi there, I want to generate pdf document including images (I use cfdocument). It works on http but on ssl (https) images are not displayed. I use coldfusion 8.01 on windows server 2003. Any idea ? Thx

  • No "Specific Information" Allowed???

     I have tried calling Comcast Customer Service and talking with their billing department, but they refused to give me any information that could help my 91-year-old grandfather. I wasn't even asking about specific information about his bill! He got a