I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names. I can still connect to iTunes store and I can still summit track names to the CDDB server. I just cant recive the names from the CD's. I read this problem on the community and I've checked that the proxy server from Lan is unchecked. I use a verizon wireless card for my internet if that matters.

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Similar Messages

I have 64 bit windows 7- and itunes version 10.6.1.7. yet i cannot connect to the store- anbody can help?

i have 64 bit windows 7- and itunes version 10.6.1.7. yet i cannot connect to the itunes store. do i need to download something additional?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes, Sync and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

the smtp server is the property of the mail provider and running in their server room
talk to them
and make sure the ports required by the mail providers smtp server are not blocked by your firewall or by your router or by your isp

The search request was unable to connect to the Search Service

I have upgraded from WSS 3.0 to SharePoint Foundation 2010. So far everything appears to be OK apart from my search.
When I attempt a search I get the following:
The search request was unable to connect to the Search Service.
I checked the Manage Database Update Status in Central Admin and noticed the following(an upgrade is required):
Also, I checked Manage Services on Server and noticed that the only search related service is 'SharePoint Foundation Help Search'.
If I go into Manage Service Applications and click new there is no option to add a search service.
Finally I tried PSConfig:
PS C:\Users\administrator.ACHESON> PSConfig.exe -cmd upgrade -inplace b2b -force
-cmd applicationcontent -install -cmd installfeatures
SharePoint Products Configuration Wizard version 14.0.6009.1000. Copyright (C) M
icrosoft Corporation 2010. All rights reserved.
Performing configuration task 1 of 6
Initializing SharePoint Products upgrade...
Waiting to get a lock to upgrade the farm.
Successfully initialized SharePoint Products upgrade.
Performing configuration task 2 of 6
Initiating the upgrade sequence...
Successfully initiated the upgrade sequence.
Performing configuration task 3 of 6
Registering SharePoint features...
Feature installation has determined that there are no new features that require
installation.
Successfully registered SharePoint features.
Performing configuration task 4 of 6
Installing the application content files...
Installing the SharePoint Central Administration Web Application content files..
Installing the SharePoint Web Application content files...
Successfully installed the application content files.
Performing configuration task 5 of 6
Upgrading SharePoint Products...
10.00%Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfig
urationTaskException was thrown. Additional exception information: The upgrade
command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Total number of configuration settings run: 5
Total number of successful configuration settings: 4
Total number of unsuccessful configuration settings: 1
Successfully stopped the configuration of SharePoint Products.
Configuration of SharePoint Products failed. Configuration must be performed be
fore you use SharePoint Products. For further details, see the diagnostic log l
ocated at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\1
4\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log and the application
event log.
This is the warnings and errors that the log contained:
10/09/2013 12:48:16 10 WRN Found registry key HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\ComponentsToRegister, but the SubKeyCount is zero
10/09/2013 12:48:24 10 WRN Failed to add the service connection point for this farm
10/09/2013 12:48:24 10 WRN Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=acheson-glover,DC=com doesn't exist in the directory.
at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
10/09/2013 12:48:40 10 ERR The exclusive inplace upgrader timer job failed.
10/09/2013 12:48:40 10 ERR Task upgrade has failed with a PostSetupConfigurationTaskException An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
10/09/2013 12:48:40 10 ERR An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:40 10 ERR Task upgrade has failed
10/09/2013 12:48:40 1 ERR Task upgrade SharePoint Products failed, so stopping execution of the engine
10/09/2013 12:48:40 1 ERR Failed to upgrade SharePoint Products.
An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: The upgrade command is invalid or a failure has been encountered.
Failed to upgrade SharePoint Products.
Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException: Exception of type 'Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException' was thrown.
at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed or some tasks were not run
10/09/2013 12:48:41 1 ERR One or more configuration tasks has failed to execute
10/09/2013 12:48:41 1 ERR Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\PSCDiagnostics_10_9_2013_12_47_54_528_1859316720.log, fix the problem, and run this configuration wizard again.
10/09/2013 12:48:41 1 ERR Post setup configuration was not run successfully when using the command line task driver module
How do I resolve this?
Cheers
Paul

Hi,
SharePoint Foundation the search service should be installed by default. It's not the same as with 2010 Standard or Enterprise where you can create a "Service Application" for it.
Follow this article to configure SharePoint Foundation Search:
http://plexhosted.blogspot.com/2011/11/how-to-configure-sharepoint-foundation.html
Meanwhile, here is a thread which discusses the similar question:
Configuration of SharePoint Foundation 2010 Search
http://social.technet.microsoft.com/Forums/sharepoint/en-US/af57728f-ae20-477b-8c67-2b594a1a72de/configuration-of-sharepoint-foundation-2010-search?forum=sharepointadminprevious
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Application cannot proceed. Internal error occured. Contact your administrator. Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct.

After clicking in email link, I get the following message on Firefox page : " The application cannot proceed!
An internal error occured. Please contact your administrator and describe the steps you took before you encounter this error message.Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct."
The email asked to install the latest Adobe Flashplayer version to have it working. I installed it, also updated my plug-ins and checked in safe mode that the extensions were not the problem. I also deleted the cookies an cache. Nothing seems to be working so far. I have the lastest version of Firefox 8.0.1 as well as Roboform 7. I noticed that the latest Firefox version has (x86) tagged to it. Does it refers to an 86 bits because my computer uses 32 or 64 bits only. I tried also different browsers and the message kept appearing. How do I resolve this problem?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

When I try to open a pdf I get the following error "Acrobat failed to connect to a DDE server" what should I do?

When I try to open a pdf I get the following error "Acrobat failed to connect to a DDE server" what should I do?

I have not had this error before, but Google has numerous examples. Here are a couple:
https://forums.adobe.com/thread/847438
http://community.spiceworks.com/topic/134868-adobe-acrobat-fatal-error-failed-to-connect-t o-a-dde-server

HT204291 Air Play was working now it is not gives me the An error occurred (-6722) while connecting to the AirPlay device "Family Room Apple TV"

Apple TV is working and set up. All I have done is take a vacation and one time I did hook up Macbook to a HDTV. Now I get home and this is the error I get.
An error occurred (-6722) while connecting to the AirPlay device “Family Room Apple TV”

Router is OK, I did check my security settings and I did turn on the firewall, while overseas, I turned it off and it works.

Ok, so last week I updated itunes on my computer. I have windows vista. Up until that point I was able to connect to the itunes store most of the time, but after that update I have not been able to connect. I have ran the diagnostic test and it says that

Sorry this is the 1st time on here. The diagnostic test said that I did not have a safe connection. I have even went as far as to delete Itunes from my computer twice and reinstall, but still luck. I have read several suggestions on here, but still to no avail. Please help me!!

Hi Dalegu219,
Thanks for visiting Apple Support Communities.
If your iTunes library is on an external hard drive, but iTunes is not recognizing the library, first make sure the right library is selected.
You can use these steps to make sure iTunes is opening the library on your external drive:
If iTunes is running, quit iTunes.
If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
If you're using a Mac, open iTunes and immediately hold down the Option key.
You should see one of these screens:
Pick Choose Library and locate the library on your external hard drive.
From:
iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support
If the right library is selected, but you do not see your songs, try re-creating the library using the instructions found here:
iTunes: How to re-create your iTunes library and playlists - Apple Support
Best Regards,
Jeremy

Had to reload i tunes following hard drive reboot now cannot acess i tunes stor keep getting error message "unable to connect to the internet connection timed out " but I have no problem getting onto the internet

Had to redownload i tunes following hard drive reboot but now cannot connect the i tunes store as I get the following error message " itunes could not connect to the itunes store the connection timed out " I get this message as soon as I click on the store.
Any ideas how to solve this ?????
Bill

Had to redownload i tunes following hard drive reboot but now cannot connect the i tunes store as I get the following error message " itunes could not connect to the itunes store the connection timed out " I get this message as soon as I click on the store.
Any ideas how to solve this ?????
Bill

When I try to "Get Track Names" or "Get Album Art," the wrong info or no info is retrieved

I'm using the latest iTunes and Lion OS.
I have many songs from long ago (not downloaded from iTunes) which have incorrect album names, etc., and I want to clean them up, but when I enter the correct info and select "Get Album Art" or "Get Track Names," either nothing is found or the incorrect information is returned, respectively.
For example, I have a song:
Artist: James Taylor
Album: Greatest Hits
Name: Mexico
It does not have the associated Album Art, nor does it have the rest of the information like Track, Year, etc. It just has the Track Name, Album Name and Artist Name. I want to update this to show that it is from the original Album, "Gorilla," so I right-click and select Info, and I fill in the Album Name as "Gorilla." When I right-click and select "Get Album Art," it tells me: "Artwork for "James Taylor - Gorilla" could not be found - though it exists in iTunes. When I right-click and select "Get Track Names," the item is updatd, and now it reads:
Artist: America
Album: Mellow Rock Hits Of The 70s: Summer Breeze
Name: A Horse With No Name
When I rename everything to "James Taylor," "Mexico," and "Gorilla," and select either "Get Album Art" or "Get Track Names," I get the exact same thing: no album artwork found, and it renames it to America.
What is happening? What am I doing wrong? Do I have the wrong expectations of the two right-click options?

I don't think CDDB and iTunes Store is the same. The CDDB gets information for CDs only (not collections of tracks made from a CD) and uses CD features such as track lengths (exact, which could be modified by a fraction of a second when you make a MP3) track count, etc. It doesn't use any information such as artist, track name. From what Mike Johnson12 was saying it seems that ITMS uses the base tag information to identify the track fully.
I have never used iTunes Store to label a track so I can't provide information there. I have no idea what criteria it uses, but for other id3 tag application and iTunes, by "exact" we mean exact. Letter case is important, and I have even found that sometimes font can make a difference.
For album artwork I do a Google search, then restrict the finds to images and select the best quality I can find. This is also the biggest in terms of file size so I only attach the image to one file in a track. When playing iTunes on the computer it displays that image for all tracks in that album.

I hv a wifi connection. the ipad is detedcting the wifi, but still unable to connect to the internet.

I have a wi-fi connection. The Ipad is detecting the connection, but i am not able to connect to the internet.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I get this error message: AutoPostToeCollege(): Internal System Error. Unable to connect to the remote server

I get the following when I try to use the bookmark for Corinthian Colleges, a bookmark I've successfully used for nearly two years. With the recent update to Mozilla, it no longer works.

I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Setup WIzard error. Unable to connect to the Router.

All the connections are correct. I am able to connect to IE and FireFox with ethernet and connected my nook via 'Linksys'. I opened using ISP address and set up security. Is there more in the setup that I need to do?
Solved!
Go to Solution.

Hi. Are you still getting that error after you setup everything on the router? Is wired internet working already? Are you replacing an old router? If you still encounter that error, you can download the updated software version for your router. It is best to wire your computer directly to the modem for that and run it from there. You may have to reset the router back to defaults by pressing its reset button down for 15 seconds so that you can start afresh with the setup. I have here a link for you that might help you regarding the software:
Cisco Connect error codes
http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=8c48ffab84714adb992ca2bf5dd9a529_Cisco_Connect_Er...

I run XP64 and itunes 8 works fine but now I can't connect to the store unless I d/load iTunes 10 which won't run on XP64. Help

Everytime I try to access the store I'm asked if I want to download iTunes 10 which I don't because it wont run on my OS and I can't decline the offer so I can't get into the store

iTunes has never supported XP64 bit.
However iTunes itself is a 32 bit program that will run on XP64 if you can get it installed. however this requires some hacking. Here are some links, you may be able to find others.
http://yukichigai.googlepages.com/iphonex64
http://skunkwerks.wordpress.com/2008/04/13/getting-itunes-to-work-with-windows-x p-x64/
I haven't tried any of this myself.

I upgraded my iphone 4s to the iphone 6 , and when trying to restore my settings from icloud, I keep getting the same error message, "unable to connect to icloud". it's been this way for 5 days! How do i fix this?

I upgraded my old iphone 4s to an iPhone 6+ last Sunday (12/28). I've been trying to restore my settings and whatnot thru the icloud restore, and have been unsuccessful. The Wi-Fi connection isn't the problem, I'm not sure what is. The error message I keep getting is: "couldn't connect to icloud", it's been 5 days!! How do I fix this?

Hi I would Restore New iPhone back to Factory Settings After Restore use same Apple ID & you will get all your Apps &Data back. This will get rid of any bugs. Cheers Brian

I have windows 7 and Itunes 10. I the the error of Unable to connect to the CDDB server when I try to get tune names

Similar Messages

Maybe you are looking for