I have windows 7 and my firefox client will not open, but it shows in task manager with 108k memory. Whats going on with my firefox?

As stated on the question I have windows 7 and meet all the requirements. But when i launch firefox It wont start, but it shows in task manager with 108k memory.

Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
http://www.filehippo.com/download_firefox/7345/

Similar Messages

  • Firefox is not open, will not open, but when I try to update or uninstall it says I need to close Firefox first. I have exhausted the suggestions on the support page. I have no choice but to use a different browser.

    Firefox is not open, will not open, but when I try to update or uninstall it says I need to close Firefox first. This is a common problem, as I have seen many posts with the same problem. I don't know what else I can say about it, it is pretty straightforward.

    http://kb.mozillazine.org/Kill_application

  • Firefox 4 will not open but returns to reboot request over and over how do I get past this?

    I downloaded the Firefox 4 update and now can not open Firefox. I have had to go through google browser to reach Firefox. The screen keeps coming up with instructions to reboot after the download. I have done this several times. I can not find Firefox in my program list at this time .

    Take it to an Apple Store, have proof of purchase with you.

  • TS2972 hi I have window 8.  My iTunes will not see my iPhone, iPad or Apple TV.  Firewall and setting all look fine.  The little box that is on the lower right that allows you to pick a device is missing, thanks

    hi I have window 8.  My iTunes will not see my iPhone, iPad or Apple TV.  Firewall and setting all look fine.  The little box that is on the lower right that allows you to pick a device is missing, thanks

    Windows 8 has not been officially released nor is it supported by iTunes.

  • When i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when clicked

    when i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when c
    the problem started when my computer screen broke from something falling on it, the screen was replaced but the people that fixed it for me told me there may be some hard disk issues when a problem like this happens, they ran their own checks and found nothing and i was given my laptop back, then when i tried to use it, i found this problem. everything else works fine.
    i have shutdown and re-started my computer multiple times and i have also re-started finder multiple times, both having no effect
    i have also done a few other things to find that my apple.com.finder.plist and apple.com.sidebar.plist are both missing, and are not re-creating themselves, i have found no way to bring them back either.
    any help would be greatly appreciated, thanks

    there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

  • I partitioned my Mac Book so I could have windows and now i don't know how to switch back it also doesn't tell me what I want to use when I reboot it. How do I switch back to OS X?

    I partitioned my Mac Book so I could have windows and now i don't know how to switch back it also doesn't ask me what I want to use when I reboot it. How do I switch back to OS X?

    At startuo hold down the Option key. That will bring up a boot menu screen.

  • I have reinstalled win 7 and premer elements 4 will not open

    hi i have just reinstalled win 7 as an upgrade and premier elements 4 will not open
    i tried to repair the porgram that did not work
    i uninstalled and reinstalled the program
    i still have the same problem
    is there a program that will remove elements in full
    or is there a ?????????????? that will help
    i also have elements 8 which has the same problem
    thanks
    David

    It's likely that, having just installed W7, there are a fair number of updates you should apply:
    Install all Windows Updates.
    Install latest version of Apple QuickTime (v7.6.9 at time of writing). Even if you don't use QuickTime, PRE relies heavily on it.
    Install most recent graphics and sound drivers from the manufacturers web sites.
    Run Disk Cleanup.
    Run Defragmenter.
    Temporarily disable any anti-virus realtime scanning.
    Post back here with the necessary information (especially about your PC) described here: Got a Problem? How to Get Started
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

  • I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding"

    I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding" and I try opening it in my Finder and it'll say "The Application 'Safari' cannot be opened." and below that it'll say "-1712" Please help? I would really like to open it again.

    The application Safari can't be opened -1712
    What to do about "The application 'Safari' can't be opened" -1712 ?

  • Hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been not help.

    hello,i have updated to the new 11,and now i tunes will not open,error pops up,says Data Execution Prevention,and other error we can not complete ur i tune request,unknown error 4002,i have uninstalled and reinstalled ,has been no help.

    - Try restoring on another computer.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have just loaded my iLife disc and now my iPhoto will not open

    I have just loaded iLife 11 which I have had for over a year and now my iPhoto will not open, how can I overcome this problem.

    I have just loaded iLife 11 which I have had for over a year
    You mean, you reinstalled iLife from the iLIfe '11 installer? If your current iPhoto library has been edited using a newer iPhoto version, you need first to update to the latest version you used. Update from the -menu > Software Update.
    Then try again to launch iPhoto.
    now my iPhoto will not open, how can I overcome this problem.
    If updating to the latest version does not solve this, explain exactly, in what way "iPhoto will not open". What is the error message, and what is your MacOS X version?

  • My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open.  Now what?

    My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open.  It said that the licensing had expired.  But this is not the case.  Now what?

    uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then properly install (do not migrate, use timemachine etc) using the installation files.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Itunes on windows 7 (64 bit) store will not open nor will it sync itouch?

    Itunes on windows 7 (64 bit) store will not open nor will it sync itouch?

    First it told me to uninstall itunes and install a windows 64 bit version which I did, the phone still won't sync
    At the same time the itunes won't access the store
    I've never accessed the store before or synced the phone
    I live in a country without apple stores and geniuses so this is really the only way someone can help me

  • Iphone not recognized by itunes and my safari also will not open??? Help??

    I bought an iphone and synced it. When unplugging it, I realized all my apps I downloaded were gone off the iphone (I did find them in the itunes folder however) but the issue is, my Safari and my itunes program will NOT open. They bounce once and that is it, never opens. No errors, nothing. I have been going insane trying to figure out what the problem is. Anyone else have this issue?

    See:
    iOS: Device not recognized in iTunes for Windows

  • I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

    I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
    My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

    DNG Converter is FREE.  Yes, really.  No subscription needed.
    - Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
    Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
    Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
    - Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
    Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
    See here for manufacturers who do (it's an old list, but you get the idea):
    http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
    - Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
    Ask yourself why other manufacturers don't use a documented backwards-compatible format.
    - Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
    If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
    "Poor Planning on your part does not constitute an Emergency on my part."
    - I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

Maybe you are looking for

  • Wrong Screenresolution on Apple 15" analog Studio Display under 10.5

    Hi everybody, I'm still using one of the good old blue TFT 15" Studio Displays with VGA and ADB connectors as my secondary display. The correct resolution should be 1024x768px at either 60hz or 75hz. When the display is connected and I start the mach

  • Printing dark when using shared printer

    I am having problems getting Lightroom 2 to print correctly when printing to a shared Epson 4000. When printing to the 4000 as a local printer everything works as it should. But when I try to print to the same printer, with the same settings as a sha

  • Best mac pro for websites

    What do realistically need to setup a professional website. Mac Pro suggestions...

  • Questions from a future macbook owner

    i would like to get a mac. either the normal macbook or the macbook pro, but i wanted to know if buying the pro is worth the xtra money. based on GHz, hard drive and memory/RAM, is it worth it? if it is, which is probably the best deal? the $1,999, $

  • Plz help me in this stored procedure

    Create a stored procedure called usp_OrderInsert. This stored procedure should accept all field values of the Orders table, including OrderID, as parameters. It should insert an order record into the Orders table.